Two ways to measure one journey
Every walk in this simulation is measured twice. The yellow tape measure in the corner pays out tape for every metre the walker covers, so it records the distance travelled: the full length of the route, bends and all. The bold orange arrow ignores the route completely. It always points from the start to wherever the walker is standing now, and its length and direction together make up the displacement. Distance is a scalar, so one number with a unit says everything about it. Displacement is a vector, so it needs a direction as well.
Why the arrow can never beat the tape
Along the first straight leg the arrow and the tape grow at the same rate, and the two bars under the readouts stay level. The moment the path turns, the tape keeps climbing while the arrow cuts the corner, so the bars split apart. A straight line is the shortest route between two points, which is why the size of the displacement can match the distance but never exceed it. A match needs one straight run with no doubling back. Finish where you began, as on the running track, and the arrow shrinks to nothing even though the tape reads 400 m.
Giving a direction
On the map, a direction can be written in several ways, and the Direction as switch moves between them. A three-figure bearing is measured clockwise from north, so 090° is due east and 323° points roughly north-west. An angle can instead be measured from the east–west line towards north or south, such as 53.1° north of east, or from the north–south line towards east or west, such as 36.9° east of north, which is how the Punjab book gives map directions. All three describe the same arrow; what matters is saying which line the angle starts from. Turn on East and north parts to see the arrow split into two dashed sides of a right-angled triangle. For the L-shaped walk these are 30 m and 40 m, so
Signs along a corridor
In straight-line mode the walker paces up and down a school corridor that runs from west to east. With east counted as positive, a displacement of −8 m means 8 m west of the stairs. Each leg is drawn on its own row above the corridor, so every turn is easy to spot, and the graph puts both quantities on one set of axes. The distance line can level off while the walker waits, but it never slopes downwards. The displacement line rises, falls and can dip below zero.
Speed, velocity and stops
The walker keeps a steady pace, using typical values of 1.5 m/s on foot, 3 m/s for a jog and 6 m/s on a bicycle. Two averages are worked out live:
On a round trip the first equals the pace and the second is zero. A stop at each turn adds time without adding distance, so the average speed falls. The average velocity falls too, unless it is already zero. Long journeys play as a time-lapse, but the clock always shows the real journey time, so the averages stay correct.
AQA and Cambridge both ask for average speed from the total distance and the total time. The Punjab Class 9 book also defines average velocity as displacement divided by time. To combine displacements at any angle, try the vector addition simulation, and for gradients and areas on motion graphs, open the motion graphs simulation.