Skip to content

Motion simulation

Stopping Distance Simulation

Watch a car react to a hazard and brake to a stop, with the thinking and braking sections marked on the road. Change the speed, the driver and the road surface, place an obstacle, and measure your own reaction time with the built-in test.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

The road is wet instead of dry. The car still does 30 mph and the driver reacts just as quickly. What happens to the thinking distance?

Try this

  1. 1Press play in the 30 mph dry-road scenario. Notice exactly where the brake lights come on, and check that it matches the end of the thinking section.
  2. 2Set the speed to 10 m/s and note the three distances. Now set 20 m/s. Which distance doubled, and which became four times as long?
  3. 3Switch the road between Dry, Wet and Icy without touching anything else. Which section of the road changes length, and which stays exactly the same?
  4. 4Take the reaction-time test, then press play at 30 mph with your own result. Now choose Distracted and play again. How much further does the car go before braking?
  5. 5Choose Force and mass. Keep the braking force fixed and raise the mass. Use a = F/m to explain what happens to the braking distance.

What this simulation shows

A car is cruising along a straight road when the driver spots an obstacle ahead. Press play and watch the stop happen in two stages. First the car carries on at full speed while the driver reacts, across the stretch marked as the thinking section. Then the brake lights come on and the car slows steadily until it is at rest, across the braking section. Together the two sections make up the stopping distance, and the readouts under the road give each length.

Thinking distance: speed × reaction time

Nothing slows the car until the driver's foot reaches the pedal, so for the whole reaction time it keeps a constant speed. That makes the thinking distance simply the speed multiplied by the reaction time. Change the driver from Alert to Tired, Distracted or After alcohol and only the thinking section stretches. The preset times are example values picked for the model: real people differ, and one person can be quicker or slower from day to day.

Braking distance: speed squared over twice the deceleration

Once the brakes act, the simulation treats the deceleration as constant. Setting the final speed to zero in v2=u2+2asv^2 = u^2 + 2as gives

braking distance=u22a\text{braking distance} = \frac{u^2}{2a}

where uu is the speed when braking begins and aa is the size of the deceleration. The speed is squared, so braking distance grows far faster than thinking distance as the car goes quicker. The graph under the road shows this: the thinking line is straight, while the braking curve bends upwards. The Double the speed table further down doubles your current speed so you can check the factor of two and the factor of four yourself.

Each road surface sets a typical deceleration: roughly 7 m/s² when dry, 4.5 m/s² when wet and 1.5 m/s² on ice. These are rounded values for the model, not measurements of any particular car. Choose Custom to enter the deceleration from an exam question instead.

Force, mass and energy

Switch the braking to Force and mass to see where the deceleration comes from. Newton's second law says a=F/ma = F/m, so a heavier car with the same braking force slows more gently and needs further to stop. The energy check shows the same idea another way: the work done by the brakes, force times braking distance, always matches the starting kinetic energy, 12mu2\tfrac12 mu^2. If the deceleration goes above the model's dry-road value, a warning appears, because a real car might not have enough grip and could skid.

Does the car stop in time?

The obstacle is already on the road when the simulation opens. Slide it nearer or further away. The verdict appears in the readouts before you press play, so make a prediction first and then watch. If the car cannot stop, the simulation works out how fast it is still going when it reaches the obstacle. Small increases in speed have startling effects here, because the extra speed lengthens both sections at once. The graph also marks the fastest speed that would still stop short.

Measure your own reaction time

The reaction-time test times five goes and puts the average into the reaction-time slider. Presses before the light changes do not count. Expect a shorter time than a driver would manage on a real road, where the danger has to be noticed first and the foot then moved across to the brake.

Symbols in your course

The switch under the simulation shows the symbols your syllabus uses, for example uu, v0v_0 or viv_i for the starting speed. The numbers stay the same.

Equations

  • Work done

    W=Fs

    work done = force × distance (along the line of action of the force)

    Open calculator →
  • Speed, distance and time

    s=vt

    distance travelled = speed × time

    Open calculator →
  • Kinetic energy

    Ek=12mv2

    kinetic energy = 0.5 × mass × (speed)²

    Open calculator →
  • Uniform acceleration (v² − u² = 2as)

    v=u2+2as

    (final velocity)² − (initial velocity)² = 2 × acceleration × distance

    Open calculator →

Check your understanding

8 questions

  1. 1.A car moves at 25 m/s and the driver takes 0.6 s to react. What is the thinking distance?
  2. 2.Which of these increases the thinking distance but leaves the braking distance unchanged?
  3. 3.A car brakes from 18 m/s with a constant deceleration of 6 m/s². How far does it travel while braking?
  4. 4.A car's speed is tripled and its deceleration stays the same. How does its braking distance change?
  5. 5.On a graph of distance against speed, which line is straight and passes through the origin?
  6. 6.A car of mass 1500 kg brakes with a constant force of 6000 N. What is its deceleration?
  7. 7.Two identical cars brake from the same speed, one on a dry road and one on ice. Why does the car on ice need further to stop?
  8. 8.At 20 m/s a car's stopping distance is 54 m when the reaction time is 0.7 s. What is it if the reaction time is 1.2 s instead?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more