Skip to content

Punjab Board Class 9 Physics · Work, energy and power

Efficiency

Section 5.8

Efficiency is the ratio of useful output energy to total input energy; multiply by 100 for percentage efficiency, which can also be found from useful power output ÷ total power input. It has no unit. Some energy is always wasted as heat, so no real machine reaches 100%.

Loading simulation…

Symbols match your course. Open the full energy stores and transfers simulation for more presets and teacher tools.

Input, useful output and waste

Every machine takes in energy in one form and hands it on in another. A water pump takes electrical energy and gives the water gravitational potential energy; a car engine takes the chemical energy of its fuel and gives the car kinetic energy.

  • Input energy: the total energy supplied to the machine.
  • Useful output energy: the part converted into the form we want.
  • Waste energy: the rest, mostly heat (and some sound) produced by friction and electrical resistance. It spreads into the surroundings.

By the law of conservation of energy, nothing is lost overall:

input energy=useful output energy+waste energy\text{input energy} = \text{useful output energy} + \text{waste energy}

Efficiency

Efficiency is the ratio of the useful output energy to the total input energy. It shows what fraction of the energy supplied ends up doing the job we want.

efficiency=useful output energytotal input energy\text{efficiency} = \frac{\text{useful output energy}}{\text{total input energy}}

Multiply by 100 to give the percentage efficiency. The same ratio can be worked out from power, since power is energy per second:

percentage efficiency=useful power outputtotal power input×100%\text{percentage efficiency} = \frac{\text{useful power output}}{\text{total power input}} \times 100\%

Efficiency is a ratio of two energies (or two powers), so it has no unit. Learn both forms for the board exam; no formula sheet is given. The sim writes efficiency as η\eta.

Why no machine is 100% efficient

Some waste energy is produced in every real conversion, so the useful output is always less than the input and the efficiency is always less than 1 (100%). A machine that gave out all its input as useful energy would be an ideal machine, with an efficiency of 100%. No such machine has been built.

A perpetual motion machine, one that keeps working forever without any energy supply, is impossible. It would have to keep making energy from nothing, which breaks the law of conservation of energy. Friction alone would bring any real machine to a stop.

Efficiency can still be improved: oil and ball bearings reduce friction, and LED bulbs turn far more of their electrical energy into light than filament bulbs do.

Worked numerical 1: filling a rooftop tank

An electric pump uses 24 000 J of electrical energy to lift 150 kg of water into a rooftop tank 12 m above it. Find its efficiency. Take g=10 N kg−1g = 10\ \text{N kg}^{-1}.

Data: input energy = 24 000 J; m=150 kgm = 150\ \text{kg}, h=12 mh = 12\ \text{m}

The useful output is the potential energy gained by the water:

Ep=mgh=150×10×12=18 000 JE_p = mgh = 150 \times 10 \times 12 = 18\,000\ \text{J} percentage efficiency=18 000 J24 000 J×100%=75%\text{percentage efficiency} = \frac{18\,000\ \text{J}}{24\,000\ \text{J}} \times 100\% = 75\%

The other 6000 J becomes heat and sound in the motor, pump and pipes.

Worked numerical 2: a tube-well motor

A tube-well motor takes 1500 W from the supply and is 80% efficient. Find its useful power output and the power wasted.

useful power output=80100×1500 W=1200 W\text{useful power output} = \frac{80}{100} \times 1500\ \text{W} = 1200\ \text{W} power wasted=1500−1200=300 W\text{power wasted} = 1500 - 1200 = 300\ \text{W}

Energy flow (Sankey) diagrams

Your textbook does not draw these, but they make efficiency easy to see. A wide arrow for the input splits into a useful arrow and waste arrows. Each width is in proportion to the energy it carries, so the branches together are exactly as wide as the input arrow.

Using the simulation

In the simulation above, the Electric kettle runs at 2000 W for 150 s. Press Play, or End to jump to the finish. The cards show Energy in 300 kJ, Useful 261 kJ (the internal (thermal) energy of the water), Waste 39.1 kJ and Efficiency 0.870 (87.0%). The Sankey diagram draws the same split.

  1. Scroll down to Check it with the equations, below the graphs. It works out the input from E=PtE = Pt, takes away the useful energy to find the waste, then divides useful by input.
  2. Drag Power of the kettle to 1000 W and Time switched on to 300 s. The input is still 300 kJ, but the efficiency drops to 82.9%: a slower kettle loses more heat to the room.
  3. Choose Battery torch left on. With a Filament bulb, only 5.00% of the energy becomes light; choose LED and it rises to 25.0%.
  4. Choose Car braking to a stop and switch on Regenerative braking. The motor now stores part of the car's kinetic energy in the battery, giving 58.7%.

These efficiencies are example values from a simple model, but the calculation is exactly the one you use in the exam.

Equations

  • Efficiency (energy)

    Learn this

    η=100EoutEin

    efficiency = useful output energy transfer ÷ total input energy transfer (× 100 for a percentage)

    Open calculator →
  • Efficiency (power)

    Learn this

    η=100PoutPin

    efficiency = useful power output ÷ total power input (× 100 for a percentage)

    Open calculator →

Common mistakes

  • Dividing the input by the output, which gives an efficiency above 1 (over 100%). Efficiency is useful output ÷ total input, so it is always less than 1.
  • Giving efficiency a unit such as J or W. It is a ratio of two energies or two powers, so it has no unit; % appears only when it is multiplied by 100.
  • Mixing energy and power in one ratio. Divide an energy by an energy, or a power by a power.
  • Forgetting to multiply by 100 when asked for percentage efficiency, or writing an answer such as 0.75%.
  • Saying waste energy is destroyed. It is changed mainly into heat that spreads into the surroundings.
  • Claiming that a well-oiled machine can be 100% efficient. Friction can be reduced but never removed, so some energy is always wasted.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Engineers compare machines using their efficiency.

    1. (a)Define efficiency.

      1 mark
      Show the answer

      Answer: Efficiency is the ratio of the useful output energy to the total input energy.

      Marking points

      • Useful output energy ÷ total input energy
    2. (b)Write the formula for percentage efficiency in terms of power.

      1 mark
      Show the answer

      Answer: Percentage efficiency = (useful power output ÷ total power input) × 100%.

      Marking points

      • (Useful power output ÷ total power input) × 100%
    3. (c)What is an ideal machine? Explain why no real machine can be ideal.

      3 marks
      Show the answer

      Answer: An ideal machine would give out all of its input energy as useful output, so its efficiency would be 100%. In every real machine, friction between moving parts (and air resistance) turns some of the input energy into heat and sound. The useful output is therefore always less than the input.

      Marking points

      • Ideal machine: output equals input / efficiency 100%
      • Friction (and air resistance) in real machines
      • Some energy always wasted as heat, so output is less than input
  2. 2.An electric hoist on a building site lifts 300 kg of bricks through a height of 8.0 m. It uses 30 000 J of electrical energy. Take g = 10 N/kg.

    1. (a)Calculate the useful energy given to the bricks.

      2 marks
      Show the answer

      Answer: Useful output = gain in potential energy = mgh = 300 × 10 × 8.0 = 24 000 J.

      Marking points

      • Ep = mgh = 300 × 10 × 8.0
      • 24 000 J
    2. (b)Calculate the percentage efficiency of the hoist.

      2 marks
      Show the answer

      Answer: Percentage efficiency = (24 000 ÷ 30 000) × 100% = 80%.

      Marking points

      • (24 000 ÷ 30 000) × 100
      • 80%
    3. (c)How much energy is wasted, and in what form is most of it wasted?

      2 marks
      Show the answer

      Answer: 30 000 − 24 000 = 6000 J, mostly as heat (with some sound) in the motor, gears and cable.

      Marking points

      • 6000 J
      • Mostly heat (some sound)
  3. 3.An electric motor has an efficiency of 75%. Its useful power output is 900 W.

    1. (a)Calculate the total power input to the motor.

      2 marks
      Show the answer

      Answer: 75 = (900 ÷ input) × 100, so input = 900 × 100 ÷ 75 = 1200 W.

      Marking points

      • Input = 900 × 100 ÷ 75
      • 1200 W
    2. (b)Calculate the energy wasted by the motor in 1 minute.

      2 marks
      Show the answer

      Answer: Power wasted = 1200 − 900 = 300 W. Energy wasted in 60 s = 300 × 60 = 18 000 J.

      Marking points

      • Power wasted = 300 W
      • 300 × 60 = 18 000 J
  4. 4.Inventors have often claimed to have built perpetual motion machines.

    1. (a)What is meant by a perpetual motion machine?

      1 mark
      Show the answer

      Answer: A machine that would keep working forever without any external supply of energy.

      Marking points

      • Works forever without an external energy supply
    2. (b)Use the law of conservation of energy to explain why such a machine cannot work.

      2 marks
      Show the answer

      Answer: Energy cannot be created, so the machine cannot make its own energy from nothing. Some of its energy is always wasted as heat through friction, so without a supply it would slow down and stop.

      Marking points

      • Energy cannot be created from nothing
      • Energy is always wasted as heat by friction, so it would stop
    3. (c)State two ways of increasing the efficiency of a machine.

      2 marks
      Show the answer

      Answer: Lubricate the moving parts with oil or grease; use ball bearings; streamline moving vehicles; replace filament bulbs with LEDs (any two).

      Marking points

      • One valid method, e.g. lubricating the moving parts with oil or grease
      • A second valid method, e.g. ball bearings, streamlining, LEDs instead of filament bulbs

Quick check

6 questions

  1. 1.Efficiency is the ratio of:
  2. 2.A motor takes in 500 J and does 400 J of useful work. Its efficiency is:
  3. 3.The unit of efficiency is:
  4. 4.The efficiency of an ideal machine is:
  5. 5.A lamp is 20% efficient. When it uses 60 J of electrical energy, the light energy it gives out is:
  6. 6.Which change increases the efficiency of a machine?