Skip to content

Cambridge IGCSE Physics (0625) · Energy, work and power

Efficiency

1.7.3

Efficiency compares the useful energy a device gives out with the total energy put in; the rest is wasted, mostly heating the surroundings (the Core idea). Calculating efficiency from energies or powers, and Sankey diagrams, are Supplement.

Loading simulation…

Symbols match your course. Open the full energy stores and transfers simulation for more presets and teacher tools.

What this topic covers

No machine delivers all of its input energy to the place you want it. Efficiency measures what fraction it does manage.

Useful and wasted energy (Core)

Every device sends its input energy to more than one place. The part that does the job you want is the useful output. Everything else is wasted: mostly it heats the device and its surroundings, and some may leave as sound. Wasted energy is not destroyed. It ends up spread thinly through internal (thermal) stores, where nobody can use it again.

A device is more efficient when a larger share of its input becomes useful output. From the same electrical energy, an LED lamp gives far more light than a filament lamp, which gets very hot. Oiling a bicycle chain cuts friction, so more of the rider's effort reaches the back wheel. Energy is conserved, so a device can never deliver more useful energy than its total input: nothing beats 100% efficiency.

The efficiency equations (Supplement)

You must recall both forms:

efficiency=useful energy outputtotal energy input×100%\text{efficiency} = \frac{\text{useful energy output}}{\text{total energy input}} \times 100\% efficiency=useful power outputtotal power input×100%\text{efficiency} = \frac{\text{useful power output}}{\text{total power input}} \times 100\%

Leave out the × 100% to give efficiency as a decimal. It has no unit, but the top and bottom must be in the same unit.

Worked example 1: a dockside crane (Supplement)

At a port in Mombasa, a crane motor is supplied with 50 kJ of energy while it lifts a 400 kg crate through 9.0 m. Find its efficiency, using g=9.8g = 9.8 N/kg.

Useful output: the crate's gain in gravitational potential energy.

ΔEp=mgΔh=400×9.8×9.0=35 280 J\Delta E_p = mg\Delta h = 400 \times 9.8 \times 9.0 = 35\,280\ \text{J} efficiency=35 28050 000×100%=70.6%\text{efficiency} = \frac{35\,280}{50\,000} \times 100\% = 70.6\%

Answer: 70.6%. The other 14.7 kJ heats the motor, cables and air, and some leaves as sound.

Worked example 2: two lamps (Supplement)

A 40 W filament lamp produces 2.0 W of light, while a 6.0 W LED lamp produces 1.5 W of light. Which is more efficient?

filament: 2.040×100%=5.0%LED: 1.56.0×100%=25%\text{filament: } \frac{2.0}{40} \times 100\% = 5.0\% \qquad \text{LED: } \frac{1.5}{6.0} \times 100\% = 25\%

Answer: the LED, by a factor of five, even though it gives slightly less light.

Sankey diagrams (Supplement)

In a Sankey diagram, the width of each arrow shows how much energy (or power) it carries. The input arrow enters on the left and divides: the useful part continues to the right, while the wasted parts curve off, usually downwards. Because energy is conserved, the output widths add up to the input width, and the efficiency is the useful width divided by the input width.

Simulation tasks

In the simulation above, the Electric kettle heats 1.0 kg of water at 2000 W for 150 s. Even before you press Play, the readouts cover the whole run: 300 kJ of Energy in and an Efficiency of 0.870 (87.0%), with 261 kJ Useful. The Efficiency card, the Sankey diagram and Check it with the equations carry a Supplement tag.

  1. (Core) Press Play. Most of the energy reaches the water's internal (thermal) store; the kettle itself and the surroundings take the rest.
  2. (Supplement) Try 3000 W for 100 s, then 1200 W for 250 s (sliders Power of the kettle, Time switched on). Both supply 300 kJ, yet the quick heat-up scores 0.884 (88.4%) and the slow one 0.842 (84.2%): the longer the kettle stays hot, the more it loses to the room.
  3. (Supplement) Pick Battery torch left on and compare the two Bulb buttons. Filament gives 0.0500 (5.00%) and LED gives 0.250 (25.0%). Moving Power of the torch changes how long the batteries last, but not the efficiency.
  4. (Supplement) Pick Car braking to a stop. The efficiency is 0 (0%), as nothing is stored usefully. Switch on Regenerative braking: 79.3 kJ now reaches the chemical store of the battery, and the efficiency becomes 0.587 (58.7%).

Equations

  • Efficiency (energy)

    Learn this · Supplement

    η=100EoutEin

    efficiency = useful output energy transfer ÷ total input energy transfer (× 100 for a percentage)

    Open calculator →
  • Efficiency (power)

    Learn this · Supplement

    η=100PoutPin

    efficiency = useful power output ÷ total power input (× 100 for a percentage)

    Open calculator →

Common mistakes

  • Dividing the wrong way round. Efficiency is useful output ÷ total input, so the answer is always less than 1 (or less than 100%).
  • Attaching J, W or another unit to an efficiency. Energy is divided by energy (or power by power), so the units cancel.
  • Mixing units. 2.4 kJ of useful output from 3000 J of input is an efficiency of 2400 ÷ 3000 = 0.8, not 2.4 ÷ 3000 = 0.0008. Put both in J, or both in kJ, first.
  • Putting the wasted energy on top of the fraction. If a question gives the wasted part, subtract it from the input to find the useful output first.
  • Writing that wasted energy disappears. It spreads into the surroundings, mostly into internal (thermal) stores, and the total stays the same.
  • (Supplement) Drawing a Sankey diagram whose output arrows do not add up to the width of the input arrow. Energy is conserved, so the widths must match.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A filament lamp and an LED lamp give out the same amount of light. When they are switched on, the filament lamp becomes much hotter than the LED lamp.

    1. (a)State what is meant by the useful energy output of a lamp.

      1 mark
      Show the answer

      Answer: The energy it transfers in the form that is wanted: light (electromagnetic waves).

      Marking points

      • energy transferred in the wanted form / as light
    2. (b)State which lamp is more efficient. Explain your answer.

      2 marks
      Show the answer

      Answer: The LED lamp. It wastes less energy by heating, so a larger fraction of its input energy becomes light.

      Marking points

      • LED lamp
      • less energy wasted by heating / larger fraction of the input becomes light
    3. (c)State what eventually happens to the energy wasted by the filament lamp.

      1 mark
      Show the answer

      Answer: It spreads into the surroundings and ends up in their internal (thermal) store.

      Marking points

      • surroundings warm up (internal (thermal) store) / dissipated
    4. (d)Explain why no lamp can have an efficiency greater than 100%.

      1 mark
      Show the answer

      Answer: Energy cannot be created, so the useful output can never be more than the energy put in.

      Marking points

      • energy cannot be created, so useful output cannot exceed input
  2. 2.Take g as 9.8 N/kg. An electric motor lifts a load of mass 12 kg through a height of 2.5 m, and is supplied with 400 J of electrical energy during the lift.

    1. (a)(Supplement) Calculate the gain in gravitational potential energy of the load.

      2 marks
      Show the answer

      Answer: ΔEp = mgΔh = 12 × 9.8 × 2.5 = 294 J

      Marking points

      • 12 × 9.8 × 2.5 seen
      • 294 J
    2. (b)(Supplement) Calculate the efficiency of the motor.

      2 marks
      Show the answer

      Answer: 294 ÷ 400 = 0.735, so the efficiency is 73.5%

      Marking points

      • 294 ÷ 400 seen
      • 73.5% (0.735)
    3. (c)(Supplement) Calculate the energy wasted, and state one way in which it is wasted.

      2 marks
      Show the answer

      Answer: 400 − 294 = 106 J. It heats the motor and its wires (or leaves as sound).

      Marking points

      • 106 J
      • heating of the motor / wires / surroundings, or sound
  3. 3.Sunlight delivers a power of 1200 W to a solar panel on a roof in Seville. The panel's useful electrical power output is 216 W.

    1. (a)(Supplement) Calculate the efficiency of the panel.

      2 marks
      Show the answer

      Answer: 216 ÷ 1200 = 0.18, which is 18%

      Marking points

      • 216 ÷ 1200 seen
      • 18% (0.18)
    2. (b)(Supplement) A newer panel receives the same power from sunlight and has an efficiency of 22%. Calculate its useful power output.

      2 marks
      Show the answer

      Answer: 0.22 × 1200 = 264 W

      Marking points

      • 0.22 × 1200 seen
      • 264 W
    3. (c)(Supplement) Suggest what happens to the rest of the power arriving at the first panel.

      1 mark
      Show the answer

      Answer: Most of it heats the panel (its internal (thermal) store), and some is reflected.

      Marking points

      • heats the panel / internal (thermal) store, or reflected
  4. 4.A to-scale Sankey diagram is drawn for a petrol engine. The input arrow is 50 mm wide and represents 2000 kJ of energy from the fuel. The useful arrow, for the work done turning the wheels, is 12.5 mm wide.

    1. (a)(Supplement) Calculate the energy represented by the useful arrow.

      2 marks
      Show the answer

      Answer: 12.5 ÷ 50 = 0.25, and 0.25 × 2000 = 500 kJ

      Marking points

      • 12.5 ÷ 50 or 0.25 seen
      • 500 kJ
    2. (b)(Supplement) Calculate the efficiency of the engine.

      1 mark
      Show the answer

      Answer: 500 ÷ 2000 × 100% = 25%

      Marking points

      • 25% (0.25)
    3. (c)(Supplement) The rest of the input is shown by a single wasted arrow. State its width and the energy it represents.

      2 marks
      Show the answer

      Answer: 50 − 12.5 = 37.5 mm, representing 2000 − 500 = 1500 kJ.

      Marking points

      • 37.5 mm
      • 1500 kJ

Quick check

6 questions

  1. 1.What does the efficiency of a device compare?
  2. 2.Where does most of the energy wasted by a car engine end up?
  3. 3.(Supplement) A motor is supplied with 500 J and does 200 J of useful work. What is its efficiency?
  4. 4.(Supplement) A heater with an efficiency of 85% takes 1500 W from the mains. What is its useful power output?
  5. 5.A student works out that a pulley system has an efficiency of 120%. Why must this be wrong?
  6. 6.(Supplement) In a to-scale Sankey diagram, the input arrow is 40 mm wide and the useful arrow is 10 mm wide. What is the efficiency?