What this topic covers
Two lifts can carry identical loads to the same floor, yet one arrives sooner. Power is the quantity that separates them: it is the rate at which work is done, or the rate of energy transfer.
Two ways to define power (Core)
Power is the work done per unit time. Equally, it is the energy transferred per unit time. These are one idea seen from two sides, because work done always equals energy transferred.
- : power, in watts (W)
- : work done, in joules (J)
- : energy transferred, in joules (J)
- : time taken, in seconds (s)
You need to remember both equations. A watt is one joule per second, so a 9 W bulb is supplied with 9 J of energy every second. Larger powers are given in kilowatts (1 kW = 1000 W) or megawatts (1 MW = 1 000 000 W).
The letter W has two jobs here. In an equation, stands for work done. After a number, as in 500 W, it is the unit, the watt.
Same energy, different power (Core)
Power is not the same as work. Two climbers of equal weight who go up the same staircase do equal work against gravity. If one takes 8 s and the other 16 s, the quicker one develops twice the power. Halving the time doubles the power, and so does doubling the energy transferred in the same time.
To find the energy or the time, rearrange: and . Change minutes and hours into seconds, and kJ or MJ into J, before you substitute.
Worked example 1: a kettle in Lagos (Core)
A kettle transfers 270 kJ of energy in 1.5 minutes. Calculate its power.
Convert first: 270 kJ = 270 000 J and 1.5 min = 90 s.
Answer: 3000 W, which is 3.0 kW.
Worked example 2: up the stairs (Core)
A student of mass 62 kg climbs stairs with a vertical height of 4.5 m in 7.0 s. Take N/kg. Find the useful power developed.
Climbing steadily, the student does work against gravity equal to their weight times the vertical height:
Answer: 391 W to 3 significant figures. Use the vertical height, never the length along the slope. Supplement candidates often reach the work in one line with .
Simulation tasks
In the simulation above, What to explore opens on Power race with People on stairs: two 50 kg climbers rise 10 m, Climber A in 20 s and Climber B in 10 s. Every value in the table is there before you press Play.
- (Core) Both climbers gain 4900 J, yet the Power row shows 245 W for A and 490 W for B. Press Play: B finishes first, and the line under the table names B as more powerful. The Working reaches 4900 J through , tagged Supplement; on Core papers, weight × height gives the same, 490 N × 10 m.
- (Core) Under Gradient tool measures, choose Climber A, then drag along A's line in the graph (Energy transferred against time). Its gradient, energy ÷ time, is 245 W. B's line goes flat from 10 s, once B is at the top; A only reaches the top as the graph ends, at 20 s.
- (Core) Pick Heavier climber, slower to the top in the Set-up menu. The 45 kg climber, A, finishes in 12 s; B, at 90 kg, needs 20 s but transfers 8820 J, so B has more power: 441 W against 368 W.
- (Core) Choose Crane with a 40% efficient motor, then Crane lifting in half the time. The energies do not change (29.4 kJ useful), but Useful power out rises from 980 W to 1960 W and Total power in from 2450 W to 4900 W.
- (Supplement) The Efficiency card, the Sankey diagram and several lines of the Working carry a Supplement tag. Useful power out ÷ Total power in is 0.400 for both cranes (980 ÷ 2450 and 1960 ÷ 4900), matching the energy ratio 29.4 ÷ 73.5.
Press End, beside Play, to jump straight to the finish of any run.