Deforming forces and elasticity
A force that changes the size or shape of a body, such as a hand squeezing a sponge, is a deforming force.
Elasticity is the property of a material that lets it return to its original size and shape once the deforming force is removed. Steel springs and rubber are elastic. Plasticine and wet clay are inelastic: they keep their new shape.
The elastic limit is the greatest deforming force a body can bear and still return completely to its original shape. Stretch a spring beyond it and its coils stay pulled apart after the force is removed. The spring now has a permanent deformation.
Hooke's law
Hooke's law states that, within the elastic limit, the extension (or compression) of a spring is directly proportional to the force applied to it:
The constant is the spring constant: the force needed for each unit of extension. Its unit is the newton per metre, N m⁻¹, and a larger means a stiffer spring. Extension is the increase in length (new length minus original length), not the stretched length itself.
The force–extension graph
Plot force on the y-axis against extension on the x-axis. While the spring obeys Hooke's law, the points lie on a straight line through the origin, and its gradient is the spring constant .
Load the spring further and the line starts to curve. The point where it stops being straight is the limit of proportionality: beyond it, force and extension are no longer proportional. Your textbook's graph labels the end of the straight part as the elastic limit; in a real spring the two points are very close together.
Worked numerical 1: finding k
A spring is 12.0 cm long. When a 600 g mass hangs from it, its length becomes 16.0 cm. Find the spring constant, then the mass that would stretch it by 6.0 cm (within the elastic limit). Take .
For : , so .
Worked numerical 2: a shopkeeper's spring balance
The spring in a spring balance has . A bag of rice stretches it by 8.0 cm. Find the weight and the mass of the rice.
Applications of Hooke's law
- Spring balances read weight from how far a spring stretches or compresses.
- In a mechanical clock, a hairspring keeps the balance wheel swinging to and fro at a steady rate.
- In a galvanometer, a tiny hair spring returns the needle to zero.
- Motorbike shock absorbers, spring mattresses and self-closing doors rely on springs kept within their elastic limit.
Using the simulation
In the simulation above, a Soft spring hangs with no load, and the Length card reads 5.00 cm. Press Record first, so the original length is the first row of the results table.
- Press Add three times, pressing Record after each. Each 100 g mass weighs 1.00 N and stretches the spring a further 2.50 cm. With 300 g on, the Load is 3.00 N, the Extension 7.50 cm, and the working gives k = 3.00 N ÷ 0.0750 m = 40.0 N/m. The points on the Force–extension graph lie on a straight line through the origin.
- Go on to 500 g, then add a sixth mass. The extension jumps to 16.39 cm, not 15.00 cm, and the status says the spring is past its limit of proportionality.
- Add a seventh mass, then press Remove until nothing is left. The spring stays 1.21 cm longer than before: it went past its elastic limit. Swap in a new one gives a fresh spring.
- Choose Stiff spring from Spring. Each 100 g now gives only 1.25 cm and k is 80 N/m. Record the same loads again. The graph rescales its axes to fit the points, so read the numbers on the extension axis: each load now gives half the extension, and the gradient is twice as large.
This model puts the limit of proportionality slightly before the elastic limit, as the note in the controls explains. Your book says a rubber band also obeys Hooke's law within its elastic limit; real rubber does so only roughly, so the Rubber band graph curves. In the exam, use the book's statements. The Energy stored card is beyond your syllabus.