Cambridge IGCSE Physics (0625) · Energy, work and power
Energy stores and transfers
1.7.1
Energy can be stored as kinetic, gravitational potential, chemical, elastic (strain), nuclear, electrostatic or internal (thermal) energy. It moves by mechanical or electrical work, heating or waves, and the total never changes (Core). Sankey diagrams and the Ek and ΔEp equations are Supplement.
Energy is never made or destroyed. It moves from store to store, and this topic is about naming the stores, describing each move and keeping count.
Energy stores (Core)
Store
Where you meet it
Kinetic
Anything moving: a train, a cricket ball
Gravitational potential
A raised object, such as water behind a dam
Chemical
Fuels, food and batteries
Elastic (strain)
Something stretched or squashed: a bungee cord, a drawn bow
Nuclear
The nuclei of atoms, such as uranium fuel
Electrostatic
Separated charges, as in a thundercloud
Internal (thermal)
The particles of any substance; it grows as the substance warms
Ways energy is transferred (Core)
Mechanical work done: a force moves an object, as when a hand throws a ball or brakes slow a car. The work done equals the energy transferred.
Electrical work done: an electric current carries energy, for example from the mains to a kettle element.
Heating: energy passes from a warmer object to a colder one, such as from a radiator to a room.
Waves: electromagnetic waves (light, infrared), sound and other waves carry energy away from a source.
Conservation of energy (Core)
The total energy never changes; it is only shared out differently. When people say energy is "used up", it has really spread into the surroundings, usually into internal (thermal) stores, where it is too thinly spread to be useful.
A flow diagram shows this with boxes for stores and labelled arrows for transfers. For a torch:
chemical store (batteries) → electrical work done → lamp → light (electromagnetic waves) and heating → internal (thermal) store of the surroundings
Worked example 1: an archer's bow (Core)
An archer in Bhutan draws a bow, putting 60 J into its elastic (strain) store. The arrow leaves with 54 J in its kinetic store. Describe the transfer and find the energy that does not reach the arrow.
The string pushes the arrow, so energy moves by mechanical work done. Energy is conserved, so the rest must have gone somewhere:
Eother=60−54=6J
Answer: 6 J, carried off by sound waves and by heating the bow, string and air.
Worked example 2: a ball thrown upwards (Supplement)
A 0.058 kg ball leaves a hand at 15 m/s. Find its kinetic energy and the height it could reach without air resistance. In fact it rises 9.44 m; how much energy is dissipated? Take g=9.8 N/kg.
Answer: 6.53 J and 11.5 m. Work done against air resistance moves 6.525−5.37=1.16 J into the internal (thermal) store of the air.
Simulation tasks
In the simulation above, every tank uses Cambridge's names for the stores. Choose a Scenario, then press Play in the bar under the stage.
(Core) Choose Bungee jump and press Play. The jumper's gravitational potential store empties into the kinetic store, then the cord's elastic (strain) store fills. In the Energy at key moments table, the Show button under Cord just tight freezes that instant: 12.3 kJ + 9.46 kJ + 0.831 kJ makes the starting 22.6 kJ.
(Core) Choose Car braking to a stop and press End. The car's 135 kJ kinetic store has gone into the internal (thermal) stores of the brakes (132 kJ) and of the air, road and tyres (2.91 kJ).
(Core) Choose Battery torch left on. Electrical work done empties the chemical store, and with the Filament bulb only 1.00 kJ of the 20.0 kJ leaves as light.
(Supplement) Back on the bungee jump, the Sankey diagram runs to the lowest point: 22.6 kJ in, 16.1 kJ to the elastic (strain) store and 6.47 kJ wasted. In Check it with the equations, the 22.6 kJ comes from ΔEp=mgΔh=70×9.8×32.97. The next line, for the cord, uses an elastic energy equation that Cambridge does not require.
Common mistakes
✕Calling light, sound or electricity energy stores. They are ways of transferring energy; the stores are kinetic, gravitational potential, chemical, elastic (strain), nuclear, electrostatic and internal (thermal).
✕Describing energy as used up or lost. It is conserved: it spreads into the surroundings, usually into internal (thermal) stores, where it is hard to use again.
✕Writing 'heat energy' as a store. On Cambridge papers the store is internal (thermal), and heating is one of the ways energy is transferred into or out of it.
✕Leaving out the small transfers in a flow diagram. A motor also transfers energy by heating and by sound waves, not only to the kinetic store of what it moves.
✕Mixing up the electrostatic store with electrical work done. A charged thundercloud has an electrostatic store; a current in a circuit transfers energy by electrical work.
✕(Supplement) Not squaring v when using Ek = ½mv². A 2.0 kg trolley at 3.0 m/s has ½ × 2.0 × 3.0² = 9.0 J, not 3.0 J.
Exam-style questions
Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.
1.Energy can be stored in several different ways.
(a)Name the energy store that increases in each case: (i) a spring is stretched; (ii) a cup of tea is warmed in a microwave oven; (iii) a lift carries a box up to the fifth floor.
Answer: No energy is ever created or destroyed. It is only moved between stores, so the total is always the same.
Marking points
energy cannot be created or destroyed
only moved between stores / total stays constant
2.A battery-powered torch is switched on and left on until the batteries are flat.
(a)State the energy store from which the energy comes.
1 mark
Show the answerHide the answer
Answer: The chemical store of the batteries.
Marking points
chemical (store of the batteries)
(b)State how energy is transferred from the batteries to the lamp.
1 mark
Show the answerHide the answer
Answer: By electrical work done (by the electric current).
Marking points
electrical work done / by the electric current
(c)The lamp transfers energy away from itself in two ways. Name them.
2 marks
Show the answerHide the answer
Answer: By light (electromagnetic waves) and by heating (the lamp and the air around it).
Marking points
light / electromagnetic waves
heating (of the lamp and surroundings) / infrared
(d)Explain what has happened to all of the energy a few hours after the batteries go flat.
2 marks
Show the answerHide the answer
Answer: Even the light is absorbed by the things it lands on, so all of the energy ends up in the internal (thermal) store of the surroundings. It is spread out, but none has been destroyed.
Marking points
ends up in the internal (thermal) store of the surroundings
spread out / dissipated, but total energy unchanged
3.A car is travelling along a level road. The driver brakes and the car comes to rest.
(a)Name the energy store of the car that decreases.
1 mark
Show the answerHide the answer
Answer: The kinetic store.
Marking points
kinetic
(b)Friction between the brake pads and the discs makes them hot. State how energy is transferred to the pads and discs, and name the store that increases.
2 marks
Show the answerHide the answer
Answer: By mechanical work done (by the friction forces). The internal (thermal) store of the pads and discs increases.
Marking points
mechanical work done (by friction)
internal (thermal) store of the pads / discs
(c)The car's kinetic store decreases by 180 kJ, and the pads and discs gain 172 kJ. Calculate how much energy goes elsewhere, and suggest where it goes.
2 marks
Show the answerHide the answer
Answer: 180 − 172 = 8 kJ. It warms the tyres, the road and the air (and a little leaves as sound).
Marking points
8 kJ
internal (thermal) store of tyres / road / air, or sound
4.A child of mass 25 kg slides from rest down a playground slide whose top is 3.2 m above its bottom. At the bottom, the child's speed is 6.0 m/s. Take g as 9.8 N/kg.
(a)(Supplement) Calculate the decrease in the child's gravitational potential energy.
2 marks
Show the answerHide the answer
Answer: ΔEp = mgΔh = 25 × 9.8 × 3.2 = 784 J
Marking points
25 × 9.8 × 3.2 seen
784 J
(b)(Supplement) Calculate the child's kinetic energy at the bottom of the slide.
2 marks
Show the answerHide the answer
Answer: Ek = ½mv² = ½ × 25 × 6.0² = 450 J
Marking points
½ × 25 × 6.0² seen
450 J
(c)(Supplement) Calculate the energy transferred to other stores, and state where it goes.
2 marks
Show the answerHide the answer
Answer: 784 − 450 = 334 J. Work done against friction and air resistance moves it to the internal (thermal) store of the child, the slide and the air (a little leaves as sound).
Marking points
334 J
internal (thermal) store of slide / child / air, or sound
(d)(Supplement) A Sankey diagram for the slide has an input arrow 50 mm wide. Calculate the width of the arrow for the child's kinetic energy at the bottom.
2 marks
Show the answerHide the answer
Answer: 450 ÷ 784 = 0.574, and 0.574 × 50 = 28.7 mm (29 mm).