Skip to content

Punjab Board Class 9 Physics · Turning effects of force

Resolution of vectors

Section 4.4Section 4.5

Resolution splits a force into two rectangular components at right angles. For a force F at angle θ to the x-axis, Fx = F cos θ and Fy = F sin θ. Going back, F = √(Fx² + Fy²) and θ = tan⁻¹(Fy/Fx). The components are not added like numbers to recover the force.

Loading simulation…

Symbols match your course. Open the full adding and resolving vectors simulation for more presets and teacher tools.

From one force to two

The head-to-tail rule joins several vectors into one resultant. Resolution goes the other way: one vector is split into two or more parts, its components, whose resultant is the original vector. Splitting a force like this is called resolution of a force (section 4.4).

The two parts are normally taken at right angles to each other, along the x- and y-axes. They are then called the rectangular (or perpendicular) components. Each component is the part of the force that is effective along its own axis.

Think of a wheeled school bag pulled by its sloping handle. Only the horizontal component moves the bag along the corridor; the vertical component lifts part of its weight off the floor.

The two formulas

Draw the force FF from the origin O at angle θ to the positive x-axis. From its head, drop a perpendicular onto the x-axis. This makes a right-angled triangle with FF as the hypotenuse, FxF_x along the x-axis and FyF_y as the upright side.

cos⁡θ=FxF  ⇒  Fx=Fcos⁡θsin⁡θ=FyF  ⇒  Fy=Fsin⁡θ\cos\theta = \frac{F_x}{F} \;\Rightarrow\; F_x = F\cos\theta \qquad \sin\theta = \frac{F_y}{F} \;\Rightarrow\; F_y = F\sin\theta
θ0°30°45°60°90°
sin θ00.5000.7070.8661
cos θ10.8660.7070.5000

So a force along the x-axis (θ = 0°) has Fx=FF_x = F and Fy=0F_y = 0, while at 90° all of it lies along y. Neither component can ever be larger than FF.

Worked numerical 1: a trolley at the railway station

Question. A porter pulls a luggage trolley with a force of 120 N along its handle, which makes 40° with the platform. Find the rectangular components of the pull.

Data: F=120F = 120 N, θ=40∘\theta = 40^\circ. A calculator in degree mode gives cos⁡40∘=0.7660\cos 40^\circ = 0.7660 and sin⁡40∘=0.6428\sin 40^\circ = 0.6428.

Fx=Fcos⁡θ=120×0.7660=91.9 NF_x = F\cos\theta = 120 \times 0.7660 = 91.9\ \text{N} Fy=Fsin⁡θ=120×0.6428=77.1 NF_y = F\sin\theta = 120 \times 0.6428 = 77.1\ \text{N}

The 91.9 N horizontal part moves the trolley along the platform; the 77.1 N vertical part pulls upwards on the handle. Notice that 91.9+77.1≠12091.9 + 77.1 \neq 120: components do not add like plain numbers.

Finding a force from its components

Section 4.5 reverses the process. FxF_x and FyF_y are at right angles, so Pythagoras' theorem gives the magnitude and the tangent ratio gives the direction:

F=Fx2+Fy2θ=tan⁡−1(FyFx)F = \sqrt{F_x^2 + F_y^2} \qquad \theta = \tan^{-1}\left(\frac{F_y}{F_x}\right)

Worked numerical 2: pulling a boat ashore

Question. Workers haul a boat onto the bank of the river Ravi with a rope. The pull of the rope has a horizontal component of 1500 N and a vertical component of 800 N. Find the magnitude and direction of the pull.

Data: Fx=1500F_x = 1500 N, Fy=800F_y = 800 N.

F=15002+8002=2 250 000+640 000=2 890 000=1700 NF = \sqrt{1500^2 + 800^2} = \sqrt{2\,250\,000 + 640\,000} = \sqrt{2\,890\,000} = 1700\ \text{N} θ=tan⁡−1(8001500)=tan⁡−1(0.533)=28.1∘\theta = \tan^{-1}\left(\frac{800}{1500}\right) = \tan^{-1}(0.533) = 28.1^\circ

The rope pulls with 1700 N at 28.1° above the horizontal.

Resolve mode, step by step

In the simulation above, choose Resolve under Mode. It opens on 10 N at 30° into components. Every angle is measured anticlockwise from +x and displayed to 0.1°.

  1. Press Components if the dashed arrows are not showing. A dotted guide falls from the arrow’s tip onto the x-axis, and the cards read FxF_x = 8.66 N and FyF_y = 5.00 N. The working lines multiply 10.0 by 0.866 and by 0.500.
  2. Drag the Direction slider to 0°, then to 90°. At 0° the whole force lies along x (FxF_x = 10.0 N, FyF_y = 0 N); at 90° it all lies along y.
  3. (Beyond the book) Under Example, choose 8 N at 120° into components. The force leans left, so FxF_x = −4.00 N, while FyF_y = 6.93 N. The note + is to the right on the card explains the sign.
  4. Choose Reverse: components 6 N and 8 N. Now you set the components, and the cards give a Vector of 10.0 N at 53.1°. Set the x-component slider to 8.0 N and the y-component slider to 6.0 N: the size stays 10.0 N, but θ drops to 36.9°.

Equations

  • Horizontal component of a force

    Learn this

    Fx=Fcos θ

    horizontal component = force × cos(angle with the horizontal)

    Open calculator →
  • Vertical component of a force

    Learn this

    Fy=Fsin θ

    vertical component = force × sin(angle with the horizontal)

    Open calculator →
  • Resultant of two perpendicular vectors

    Learn this

    R=F12+F22

    (resultant)² = (first vector)² + (second vector)²

    Open calculator →

Common mistakes

  • Swapping sin and cos. With θ measured from the x-axis, the x-component is F cos θ and the y-component is F sin θ.
  • Using an angle measured from the vertical in Fx = F cos θ. First change it to the angle with the x-axis (90° minus the given angle), or swap sin and cos.
  • Adding Fx and Fy as numbers to get F back. They are at right angles, so use F = √(Fx² + Fy²).
  • Writing θ = tan⁻¹(Fx/Fy). For the angle with the x-axis the y-component goes on top: θ = tan⁻¹(Fy/Fx).
  • Leaving the calculator in radian mode. Switch it to degrees before finding cos 40° or tan⁻¹(0.533).
  • Giving a component larger than the force itself. Each rectangular component is a side of a right-angled triangle whose hypotenuse is F, so it can never exceed F.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Answer these short questions on the resolution of vectors.

    1. (a)What is meant by resolution of a force?

      1 mark
      Show the answer

      Answer: Splitting a single force into two or more parts (components) whose combined effect is the same as the original force.

      Marking points

      • Dividing a force into components that together have the same effect as the force
    2. (b)What are the rectangular components of a force? Write their values for a force F that makes an angle θ with the x-axis.

      3 marks
      Show the answer

      Answer: They are two components of the force at right angles to each other, along the x- and y-axes. Fx = F cos θ and Fy = F sin θ.

      Marking points

      • Two components perpendicular to each other (along the x- and y-axes)
      • Fx = F cos θ
      • Fy = F sin θ
  2. 2.A gardener pushes a lawn mower with a force of 90 N along its handle. The handle makes an angle of 45° with the ground.

    1. (a)Calculate the horizontal component of the push.

      2 marks
      Show the answer

      Answer: Fx = F cos θ = 90 × cos 45° = 90 × 0.707 = 63.6 N.

      Marking points

      • Fx = F cos θ with 90 N and 45° substituted
      • 63.6 N (accept 64 N)
    2. (b)Calculate the vertical component of the push and state its direction.

      2 marks
      Show the answer

      Answer: Fy = F sin θ = 90 × sin 45° = 63.6 N, acting downwards into the ground.

      Marking points

      • 63.6 N (accept 64 N)
      • Downwards
    3. (c)Explain why holding the handle at a smaller angle to the ground helps the push move the mower forward.

      2 marks
      Show the answer

      Answer: At a smaller angle cos θ is larger, so a bigger part of the same push acts horizontally. Sin θ is smaller, so less of the push presses the mower down into the ground.

      Marking points

      • Smaller θ gives a larger cos θ, so a larger horizontal component
      • Smaller sin θ, so a smaller downward component
  3. 3.The rectangular components of a force are Fx = 21 N and Fy = 20 N.

    1. (a)Calculate the magnitude of the force.

      2 marks
      Show the answer

      Answer: F = √(Fx² + Fy²) = √(21² + 20²) = √(441 + 400) = √841 = 29 N.

      Marking points

      • F = √(21² + 20²) = √841
      • 29 N
    2. (b)Find the angle the force makes with the x-axis.

      2 marks
      Show the answer

      Answer: θ = tan⁻¹(Fy/Fx) = tan⁻¹(20/21) = tan⁻¹(0.952) = 43.6°.

      Marking points

      • θ = tan⁻¹(20/21)
      • 43.6° (accept 44°)
    3. (c)Without a calculator, explain whether θ is more or less than 45°.

      1 mark
      Show the answer

      Answer: Less than 45°, because Fy is smaller than Fx, so Fy/Fx is less than 1 = tan 45°.

      Marking points

      • Less than 45° because Fy is smaller than Fx (tan θ is less than 1)
  4. 4.A force of 50 N acts vertically upwards, along the y-axis.

    1. (a)State its x-component and its y-component.

      2 marks
      Show the answer

      Answer: θ = 90°, so Fx = 50 cos 90° = 0 and Fy = 50 sin 90° = 50 N.

      Marking points

      • Fx = 0
      • Fy = 50 N
    2. (b)Can a rectangular component of a force ever be larger than the force itself? Explain.

      2 marks
      Show the answer

      Answer: No. The force is the hypotenuse of the right-angled triangle formed with its components, and sin θ and cos θ are never more than 1, so each component is at most equal to F.

      Marking points

      • No
      • F is the hypotenuse, or sin θ and cos θ are never greater than 1

Quick check

6 questions

  1. 1.A force F acts at an angle θ to the x-axis. Its x-component is:
  2. 2.A 20 N force acts at 30° to the x-axis. Its y-component is:
  3. 3.The rectangular components of a vector are always:
  4. 4.A force has components Fx = 9 N and Fy = 12 N. Its magnitude is:
  5. 5.The two components of a force are equal and both positive. The force makes an angle with the x-axis of:
  6. 6.A force acts along the x-axis. Its y-component is: