What AQA 4.5.1.1 expects
Both tiers need this, with no equation to learn. You should be able to:
- explain how a scalar quantity differs from a vector quantity
- sort familiar quantities into the two groups
- contrast distance with displacement, and speed with velocity (4.5.6.1)
- represent a vector by an arrow drawn to scale
Higher tier adds 4.5.1.4: a scale drawing to find the resultant of two forces at an angle, or to break one force into perpendicular components. AQA wants drawings, not trigonometry.
Size only, or size and a direction?
A scalar is fully described by a number and unit, such as 65 kg or 12 s. That number is its magnitude. A vector needs a magnitude and a direction: "40 N" leaves a force half-described, while "40 N downwards" finishes the job.
| Scalar | Vector partner | What the vector adds |
|---|---|---|
| distance (m) | displacement (m) | the straight line from start to finish, with its direction |
| speed (m/s) | velocity (m/s) | the direction of travel |
| mass (kg) | weight (N) | it is a force, pulling towards the Earth's centre |
Time, energy and temperature are scalars too. Every force (friction, tension, drag) is a vector, as are acceleration and the Higher-tier quantity momentum. Units cannot decide it, since distance and displacement both use metres; ask whether "which way?" makes sense.
Drawing a vector as an arrow
Write your scale on the diagram, such as 1 cm for 5 N. A 35 N force is then a ruled line 35 ÷ 5 = 7.0 cm long, pointing the way the force acts.
Along one line, signs replace directions. With right as positive, forces of +9 N and −4 N on one object give 5 N to the right (4.5.1.4, both tiers).
Worked example (Higher tier): a scale drawing
A rowing boat and a canoe are tied to one ring on a jetty. The rowing boat's rope pulls the ring with 150 N due east; the canoe's rope pulls it with 80 N at 60° north of west. Work out the resultant of the two pulls on the ring.
- Scale: with 1 cm for 20 N, the arrows are 150 ÷ 20 = 7.5 cm and 80 ÷ 20 = 4.0 cm.
- First arrow: from a starting dot, draw 7.5 cm due east.
- Second arrow: at its head, rule a faint guide pointing west, measure 60° from it towards north, and draw 4.0 cm.
- Resultant: rule it from your starting dot to the second arrowhead.
- Measure: it is 6.5 cm long, and 6.5 × 20 = 130 N. At the start, a protractor gives 32° from east.
Answer: about 130 N at 32° north of east.
Extra, beyond AQA: the triangle's corner between the two arrows is 60°, so the cosine rule (Higher-tier GCSE Maths) checks the length:
Vectors in the simulation
In the simulation above, begin by pressing Reset: you get Add vectors with Two forces at right angles, F₁ (3 N) pointing right and F₂ (4 N) pointing up. Angles run anticlockwise from +x: 0° is right, 90° is up.
- (Both tiers) From Example, pick A walk: 4 km east, then 3 km north, and press Head-to-tail unless the arrows already join. The route is 7 km, yet Resultant shows 5.00 km: the displacement, 36.9° north of east.
- (Higher tier) Pick Two equal forces 60° apart, then turn the Scale drawing (grid, protractor and ruler) toggle on. Multiply the ruler's squares by the scale in the corner badge and read the protractor. Compare with Resultant (8.66 N) and Direction (30.0°).
- (Higher tier) Rebuild the jetty, scaled down 20 times: choose F₁ under Change and set Size to 7.5 N, then choose F₂ and set 4.0 N at a Direction of 120°, or 60° north of west with +x as east. The resultant reads 6.50 N at 32.2°.
- (Higher tier) Set Mode to Resolve for 10 N at 30°. Press Components if the dashed parts are hidden, then count the grid squares along each and multiply by the badge's scale: about 8.7 N and 5.0 N.
The working lines use Pythagoras and trigonometry, which go beyond AQA: use them only to check drawings.