Skip to content

Punjab Board Class 9 Physics · Turning effects of force

Principle of moments

Section 4.6

A body in equilibrium obeys the principle of moments: about any point, the sum of the anticlockwise moments equals the sum of the clockwise moments. For one weight on each side of a pivot, w₁ × ℓ₁ = w₂ × ℓ₂, where each ℓ is measured from the pivot.

Loading simulation…

Symbols match your course. Open the full principle of moments simulation for more presets and teacher tools.

Clockwise and anticlockwise moments

Any force that can turn a body about an axis has a moment, or torque, τ=F×ℓ\tau = F \times \ell. Here ℓ\ell, the moment arm, is how far the force's line of action lies from the axis, measured at right angles. Each moment has a sense of turning:

  • a clockwise moment tends to turn the body the same way as the hands of a clock;
  • an anticlockwise moment tends to turn it the opposite way.

Your textbook takes anticlockwise torque as positive and clockwise torque as negative. For balance problems it is easier to list the two kinds in separate columns and compare the column totals.

The principle of moments

Principle of moments: if a body is in equilibrium (balanced), then about any point you choose, the sum of the anticlockwise moments equals the sum of the clockwise moments.

For one weight on each side of a pivot this becomes

w1×ℓ1=w2×ℓ2w_1 \times \ell_1 = w_2 \times \ell_2

With several weights, add up each side first:

Σ anticlockwise moments=Σ clockwise moments\Sigma\ \text{anticlockwise moments} = \Sigma\ \text{clockwise moments}

This is the second condition of equilibrium, Στ=0\Sigma\tau = 0, in a form that is easy to use: with the textbook's signs, the positive and negative torques cancel. Punjab board papers come without an equation list, so memorise w1ℓ1=w2ℓ2w_1\ell_1 = w_2\ell_2 and practise rearranging it for any one quantity.

Checking the principle with a metre rule

  1. Rest a uniform metre rule on a wedge and slide it until it balances. The wedge is now under its centre of gravity, the 50 cm mark. The rule's own weight passes through the pivot, so it has no moment.
  2. Hang slotted masses from loops of thread, some on each side. Move one loop until the rule is level again.
  3. Read every distance from the wedge, not from the zero end of the scale, and convert it to metres. Change each mass to a weight using w=mgw = mg with g=10 N kg−1g = 10\ \text{N kg}^{-1}.
  4. Work out each moment, then total the clockwise and the anticlockwise columns. The totals agree, apart from small reading errors.

Worked numerical 1: three weights on a metre rule

A uniform metre rule balances on a wedge at its 50 cm mark. A 5 N weight hangs at the 20 cm mark and a 2 N weight at the 35 cm mark. Find the weight that must hang at the 90 cm mark to keep it level.

Data: w1=5 Nw_1 = 5\ \text{N}, ℓ1=50−20=30 cm=0.30 m\ell_1 = 50 - 20 = 30\ \text{cm} = 0.30\ \text{m}; w2=2 Nw_2 = 2\ \text{N}, ℓ2=50−35=15 cm=0.15 m\ell_2 = 50 - 35 = 15\ \text{cm} = 0.15\ \text{m}; ℓ3=90−50=40 cm=0.40 m\ell_3 = 90 - 50 = 40\ \text{cm} = 0.40\ \text{m}; w3=?w_3 = ?

Both known weights are left of the wedge, so their moments are anticlockwise. The unknown weight gives the only clockwise moment.

w1ℓ1+w2ℓ2=w3ℓ3w_1\ell_1 + w_2\ell_2 = w_3\ell_3 (5×0.30)+(2×0.15)=w3×0.40(5 \times 0.30) + (2 \times 0.15) = w_3 \times 0.40 w3=1.5+0.30.40=1.80.40=4.5 Nw_3 = \frac{1.5 + 0.3}{0.40} = \frac{1.8}{0.40} = 4.5\ \text{N}

Worked numerical 2: a tower crane

A tower crane on a building site in Islamabad holds a 2000 kg bundle of steel bars 15 m from its tower. A concrete counterweight sits 5 m from the tower on the opposite side. Ignoring the weight of the crane's arm, find the mass of counterweight needed for balance. Take g=10 N kg−1g = 10\ \text{N kg}^{-1}.

w1=mg=2000×10=20 000 Nw_1 = mg = 2000 \times 10 = 20\,000\ \text{N} w2×5=20 000×15⇒w2=300 0005=60 000 Nw_2 \times 5 = 20\,000 \times 15 \quad\Rightarrow\quad w_2 = \frac{300\,000}{5} = 60\,000\ \text{N} m2=w2g=60 00010=6000 kgm_2 = \frac{w_2}{g} = \frac{60\,000}{10} = 6000\ \text{kg}

The counterweight must be three times as heavy as the steel because its moment arm is one third as long.

Using the simulation

In the simulation above, the rule starts in Two weights in balance, held level on its pegs, and the stage shows Held level. Under the stage, the readouts put each moment in its own column: A gives 3 N × 0.20 m = 0.600 N m anticlockwise and B gives 2 N × 0.30 m = 0.600 N m clockwise. The rule's own 1 N weight acts through the pivot, so it adds nothing to either column. Press Release. The rule stays level and the badge changes to Balanced.

Next choose Two weights against one. Two weights now share the anticlockwise column. Check that 0.400 N m + 0.300 N m matches the single 0.700 N m on the clockwise side.

Then test yourself with Find an unknown weight. Press Release and watch the left end drop. Move B with the B: Position on the scale slider, or drag it, until the badge says Balanced. B's moment now equals the hidden weight's moment. Divide it by the hidden weight's distance from the pivot, then press Reveal to check your answer.

Equations

  • Principle of moments (two forces)

    Learn this

    w1=w2ℓ2ℓ1

    anticlockwise moment = clockwise moment, so F₁ × d₁ = F₂ × d₂

    Open calculator →
  • Moment of a force

    Learn this

    τ=Fℓ

    moment of a force = force × perpendicular distance from the pivot

    Open calculator →

Common mistakes

  • Reading distances from the zero end of the metre rule. Each moment arm is the distance from the pivot, so subtract the pivot reading first.
  • Putting a mass in kilograms or grams into the moment. Change it to a weight first with w = mg, using g = 10 N/kg.
  • Adding every moment together. Total the clockwise moments and the anticlockwise moments separately, then set the two totals equal.
  • Writing the answer in N m while the distances are still in centimetres. Convert centimetres to metres before multiplying.
  • Ignoring the rule's own weight when the pivot is not at the 50 cm mark. That weight acts at the centre of gravity and then has a moment of its own.
  • Stating the principle without saying the body is balanced (in equilibrium) and that the moments are taken about the same point.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Balances, see-saws and levers all work by the principle of moments.

    1. (a)State the principle of moments.

      2 marks
      Show the answer

      Answer: When a body is in equilibrium, the sum of the clockwise moments about any point is equal to the sum of the anticlockwise moments about the same point.

      Marking points

      • Body is balanced / in equilibrium
      • Sum of clockwise moments = sum of anticlockwise moments about the same point
    2. (b)A uniform metre rule rests on a pivot at its 50 cm mark with nothing hanging from it. Explain why it stays balanced.

      2 marks
      Show the answer

      Answer: The rule's weight acts at its centre of gravity, the 50 cm mark, which is directly above the pivot. The moment arm of the weight is zero, so it has no moment and there is no resultant moment to turn the rule.

      Marking points

      • Weight acts at the centre of gravity (50 cm mark), through the pivot
      • Moment arm is zero, so no moment / no resultant moment
  2. 2.A uniform metre rule is pivoted at its 50 cm mark. A 6 N weight hangs from the 15 cm mark.

    1. (a)Calculate the moment of the 6 N weight about the pivot.

      2 marks
      Show the answer

      Answer: ℓ = 50 − 15 = 35 cm = 0.35 m. τ = F × ℓ = 6 × 0.35 = 2.1 N m (anticlockwise).

      Marking points

      • ℓ = 0.35 m
      • 2.1 N m
    2. (b)Find the position on the scale at which a 7 N weight must hang to balance the rule.

      3 marks
      Show the answer

      Answer: By the principle of moments, 7 × ℓ = 2.1, so ℓ = 2.1 ÷ 7 = 0.30 m. The weight hangs 30 cm on the other side of the pivot, at the 80 cm mark.

      Marking points

      • 7 × ℓ = 2.1 (clockwise moment = anticlockwise moment)
      • ℓ = 0.30 m
      • At the 80 cm mark (on the other side of the pivot)
  3. 3.A labourer moves 60 kg of bricks in a wheelbarrow. The weight of the bricks acts 0.40 m from the wheel's axle, and the labourer lifts the handles vertically at 1.20 m from the axle. Ignore the weight of the wheelbarrow. Take g = 10 N/kg.

    1. (a)Calculate the weight of the bricks.

      1 mark
      Show the answer

      Answer: w = mg = 60 × 10 = 600 N.

      Marking points

      • 600 N
    2. (b)Use the principle of moments about the axle to find the upward force needed to hold the handles still.

      3 marks
      Show the answer

      Answer: Moment of the bricks = 600 × 0.40 = 240 N m. For balance, F × 1.20 = 240, so F = 240 ÷ 1.20 = 200 N.

      Marking points

      • Moment of bricks = 600 × 0.40 = 240 N m
      • F × 1.20 = 240
      • F = 200 N
    3. (c)Explain why the handles are made long.

      1 mark
      Show the answer

      Answer: A longer moment arm for the lifting force means a smaller force gives the same moment.

      Marking points

      • Larger moment arm, so less force is needed for the same moment
  4. 4.A student wants to verify the principle of moments using a metre rule, a wedge and some slotted masses.

    1. (a)Describe how the experiment is carried out and how the results show that the principle is true.

      4 marks
      Show the answer

      Answer: Balance the metre rule on the wedge at its centre of gravity. Hang masses on both sides and adjust one until the rule is level. Measure the distance of each mass from the wedge and find each weight using w = mg. Calculate the moments: the sum of the clockwise moments equals the sum of the anticlockwise moments.

      Marking points

      • Rule balanced on the wedge at its centre of gravity
      • Masses hung on both sides and moved until the rule is level
      • Distances measured from the pivot; weights from w = mg
      • Total clockwise moment = total anticlockwise moment

Quick check

6 questions

  1. 1.A balanced body obeys the principle of moments. About any point:
  2. 2.An 8 N weight hangs 0.15 m to the left of a pivot. What weight hung 0.40 m to the right will balance it?
  3. 3.A 300 g mass hangs 0.25 m from the pivot of a metre rule. Taking g = 10 N/kg, its moment is:
  4. 4.A weight on a balanced rule is moved further from the pivot. The rule will:
  5. 5.In the metre rule experiment, the rule is first balanced at its centre of gravity so that:
  6. 6.A 25 kg child sits 1.8 m from the middle of a balanced see-saw. A second child sits 1.5 m from the middle on the other side. Ignoring the plank, the second child's mass is: