SUVAT Equations: How to Choose the Right One Every Time
The five SUVAT equations, a reliable four-step method for picking the right one, sign conventions, and worked examples including free fall.
Published · 6 min read
On this page
The SUVAT equations describe motion in a straight line with constant acceleration. There are five quantities and five equations. Choosing the wrong equation is the most common reason students get stuck.
Here is the key idea. Each SUVAT equation leaves out exactly one of the five quantities. In a typical question you know three quantities and want a fourth. The fifth one is the quantity you do not know and do not need. Choose the equation that does not contain it.
This guide shows you that method step by step. It also covers sign conventions and four worked examples, including free fall.
What do s, u, v, a and t stand for?
| Symbol | Quantity | SI unit |
|---|---|---|
| s | Displacement | m |
| u | Initial velocity | m/s |
| v | Final velocity | m/s |
| a | Acceleration | m/s² |
| t | Time | s |
Notice that s is displacement, not distance. Displacement has a direction, so it can be negative. Velocity and acceleration also have directions. Time does not.
Different courses use different letters. For example, many US courses write for the initial velocity and for displacement, and some textbooks in Pakistan use , and S. The equations work in exactly the same way. Only the letters change.
When can you use the SUVAT equations?
You can only use them when both of these are true:
- The object moves in a straight line.
- The acceleration is constant (uniform).
A stone falling with no air resistance has constant acceleration, so SUVAT works. A skydiver does not. As the skydiver speeds up, air resistance grows, so the acceleration gets smaller and smaller. You can see the difference in the free fall and air resistance simulation. Without air resistance, the velocity–time graph is a straight line. With it, the graph curves, and SUVAT no longer applies.
The five SUVAT equations
| Equation | Quantity it leaves out |
|---|---|
| s | |
| v | |
| u | |
| a | |
| t |
Some courses write the last equation as . That is the same equation, rearranged. Not every course lists . If yours does not, you can always reach the same answer by using two of the other equations.
How to choose the right SUVAT equation
Use this four-step method for every question.
- Write the five letters s, u, v, a, t in a column.
- Fill in what you know, with units and signs. You need three values.
- Put a question mark next to the quantity you want.
- Find the blank letter. It is the one you do not know and do not need. Choose the equation that does not contain it.
Then rearrange the equation, substitute your values and solve.
Look for hidden values
Questions often give you numbers in words. Learn these:
- "Starts from rest" or "dropped" means u = 0.
- "Comes to rest" or "stops" means v = 0.
- "Constant velocity" means a = 0.
- "At its highest point" (for an object thrown straight up) means v = 0.
- "Falls freely" means the acceleration is g = 9.8 m/s² downwards.
Sign conventions
Velocity, displacement and acceleration have directions. So before you start, choose which direction is positive. Anything pointing the other way is negative.
- For horizontal motion, the usual choice is the direction the object starts moving.
- If an object is slowing down, its acceleration has the opposite sign to its velocity.
- For vertical motion, if you choose up as positive, then . This stays true for the whole flight, on the way up and on the way down.
Worked examples
Worked example 1: a car speeding up
A car in the US speeds up steadily from 5.0 m/s to 25 m/s in 8.0 s along a straight road. How far does it travel?
List: s = ?, u = 5.0 m/s, v = 25 m/s, a = not needed, t = 8.0 s
Choose: a is missing, so use
Substitution:
Answer: s = 120 m
Worked example 2: braking to a stop
A car near Lahore is travelling at 72 km/h. The driver brakes with a constant deceleration of 2.5 m/s². How far does the car travel before it stops?
Convert first: 72 km/h ÷ 3.6 = 20 m/s
Sign choice: the direction of motion is positive, so the acceleration is negative.
List: s = ?, u = 20 m/s, v = 0, a = −2.5 m/s², t = not needed
Choose: t is missing, so use
Substitution: , which gives
Answer:
Worked example 3: free fall from a bridge
A student drops a stone from a bridge. It hits the water 3.0 s later. Ignore air resistance. Find the height of the bridge above the water and the speed of the stone as it hits the water.
Sign choice: down is positive, so a = +9.8 m/s².
List: s = ?, u = 0, v = ?, a = 9.8 m/s², t = 3.0 s
Part (a): you want s and do not need v, so use
Substitution:
Answer: the bridge is 44 m above the water (2 significant figures).
Part (b): you want v and do not need s, so use
Substitution:
Answer: the stone hits the water at 29 m/s (2 significant figures).
Worked example 4: a cricket ball thrown upwards
A fielder in Mumbai throws a cricket ball straight up at 14 m/s. Ignore air resistance. Find the maximum height and the time taken to reach it.
Sign choice: up is positive, so a = −9.8 m/s².
List: s = ?, u = 14 m/s, v = 0 (at the top), a = −9.8 m/s², t = ?
Maximum height: t is not needed, so use
Substitution: , which gives
Answer:
Time to the top: s is not needed, so use
Substitution:
Answer: (2 significant figures)
With no air resistance, the trip down takes the same time as the trip up. So the ball returns to the fielder's hand after about 2.9 s. At that moment its displacement is zero, even though it has travelled 20 m.
To check your own answers, use the SUVAT equations simulation. Enter any three known values and it works out the other two.
Common mistakes
- Using SUVAT when the acceleration changes. If air resistance matters, or a force changes, the equations do not apply.
- Mixing up signs. Decide on a positive direction first and stick to it. A deceleration of 2.5 m/s² is written a = −2.5 m/s² if the object moves in the positive direction.
- Forgetting the square root. gives you . Take the square root to find v.
- Not converting units. Change km/h to m/s by dividing by 3.6 before you use any equation.
- Missing hidden values. "From rest" gives you u = 0 for free.
- Confusing distance with displacement. A ball that lands back in your hand has s = 0.
- Calculator slips with negatives. Use brackets: , not −196.
Key points
- SUVAT works only for straight-line motion with constant acceleration.
- The five quantities are s, u, v, a and t. Each equation leaves out one of them.
- Method: list the five letters, fill in three, mark the one you want, then choose the equation without the fifth.
- Choose a positive direction before you start. Quantities pointing the other way are negative.
- In free fall with up as positive, for the whole flight.
- Always give your answer with a unit and a sensible number of significant figures.