Skip to content

Black Body Radiation Explained: Infrared, Temperature and the Earth's Energy Balance

Learn why every object gives out and takes in infrared, what makes a perfect black body, how temperature changes the amount and the wavelengths of radiation, why a balance of absorbing and emitting gives a steady temperature, and how that balance sets the Earth's temperature.

Published · 8 min read

On this page

Everything around you, warm or cold, is sending out infrared radiation right now, and soaking up infrared from its surroundings at the same time. Heat an object up and its output climbs: it radiates more energy every second. More of that energy also comes out at shorter wavelengths, which is why very hot things start to glow.

A perfect black body is an ideal that no real object quite reaches. Every bit of radiation arriving at it is soaked up, with nothing bouncing off and nothing getting through. A surface that absorbs well also emits well, so nothing at the same temperature can out-emit it.

Whether an object warms, cools or holds steady depends on two rates: how fast it absorbs radiation and how fast it emits it. Absorbing faster warms it, emitting faster cools it, and when the two rates match, its temperature stays the same. The same balance controls the temperature of the whole Earth.

Does everything really give out radiation?

Yes. An ice cube, a classroom wall and your own body are all emitting infrared right now. A thermal camera can see it: warm faces stand out against cooler walls.

Deserts show this at night. After sunset in the Thar Desert or the Sahara, the ground keeps emitting infrared towards a clear sky, and little comes back, so it cools quickly. Cloudy nights stay milder, because clouds absorb some of the outgoing infrared and return part of it to the ground.

What is a perfect black body?

"Black" here describes absorbing, not colour. A perfect black body absorbs every wavelength that reaches it: radio waves, infrared, light, everything. Nothing real is perfect, but soot comes close.

A small hole in the side of a closed box comes even closer. Radiation that enters bounces around inside and is absorbed a little at each bounce. Almost none finds its way back out, so the hole looks darker than any black paint.

Why must a good absorber also be a good emitter? Imagine two objects inside a room, both already at room temperature. Each one stays at that temperature, so each must emit exactly as fast as it absorbs. The object that absorbs more each second must therefore emit more too. The perfect absorber is the perfect emitter.

A hot black body glows, so it need not look black at all. Stars behave roughly like black bodies.

How does temperature change the radiation?

Two things change as an object gets hotter:

  1. It emits more. The total energy it radiates each second goes up, and it goes up very fast as the temperature rises.
  2. The peak moves to shorter wavelengths. The wavelength where it emits most strongly gets shorter.

Plot intensity against wavelength, and the curve for a hotter object is higher at every wavelength, with its peak further towards the short-wavelength end.

An electric cooker ring shows this. Soon after it is switched on, it warms your hand while it still looks dark, because nearly everything it emits is infrared. Above roughly 500 °C, it glows dull red. Hotter objects glow orange, then yellow-white.

Stars show the same pattern. These surface temperatures are approximate:

ObjectApproximate surface temperatureColour
Betelgeuse, a red supergiant in Orionabout 3300 °Corange-red
The Sunabout 5500 °Cwhite, brightest in the visible range
Rigel, also in Orionover 10 000 °Cblue-white

At the other end, the Earth's surface, at about 15 °C on average, emits most strongly at wavelengths around 10 micrometres. That is roughly twenty times longer than the wavelength where sunlight is brightest.

Why does an object settle at a steady temperature?

Compare two rates: how fast the object absorbs radiation and how fast it emits radiation.

  • Absorbing faster than emitting: its temperature rises.
  • Emitting faster than absorbing: its temperature falls.
  • Both rates equal: its temperature stays the same. It is still emitting, just no faster than it absorbs.

The balance fixes itself. A warming object emits more, until its emission catches up with its absorption. Real objects also lose energy by conduction and convection, which the worked examples below leave out.

Worked example 1: a water tank on a roof

A black-painted metal water tank sits on a roof in Karachi. At noon, it absorbs radiation from the Sun at 900 W, and it emits radiation at 400 W. Assume radiation is its only energy transfer.

(a) Is its temperature rising, falling or steady?

(b) How much more energy does it absorb than it emits in 5 minutes?

(c) When will its temperature stop rising?

(a) Absorption is faster than emission, so the tank's temperature is rising.

(b) Net rate: 900−400=500900 - 400 = 500 W, which is 500 J every second

Time: 5×60=3005 \times 60 = 300 s

Energy: 500×300=150 000500 \times 300 = 150\ 000 J

Answer: 150 000 J, or 150 kJ, more is absorbed than emitted.

(c) As the tank warms, it emits faster. Its temperature stops rising when it emits 900 W, as fast as it absorbs.

What sets the Earth's temperature?

The Earth works in the same way, on a much bigger scale. Several factors matter:

  • Reflection. Clouds, snow, ice and pale deserts reflect part of the incoming sunlight straight back into space. That part never warms anything.
  • Absorption. Land, oceans and the air absorb the rest.
  • Emission. The Earth emits infrared, and some of it escapes to space.
  • The atmosphere. Gases such as water vapour, carbon dioxide and methane let most sunlight through. But they absorb some of the infrared the surface emits, then emit it again in all directions, some of it back down towards the ground.

The last point is called the greenhouse effect. Without it, the average surface temperature would be roughly −18 °C instead of about 15 °C.

Worked example 2: the Earth's radiation budget

Averaged over the whole planet, about 340 W of sunlight arrives at the top of the atmosphere for each square metre. About 30% is reflected back into space. These are approximate measured values.

(a) How much is absorbed per square metre?

(b) How much must the Earth emit to space for a steady temperature?

(c) Suppose melting ice and snow cut the reflected share to 29%. What happens next?

(a) Reflected: 0.30×340=1020.30 \times 340 = 102 W per square metre

Absorbed: 340−102=238340 - 102 = 238 W per square metre

(b) For a steady temperature, emission to space must equal absorption: about 238 W per square metre. Satellites measure close to 240.

(c) New absorption: 0.71×340=241.40.71 \times 340 = 241.4 W per square metre. That is 241.4−238=3.4241.4 - 238 = 3.4 W per square metre more than the Earth emits, so it warms. It keeps warming until it emits enough to match again.

Extra greenhouse gases upset the balance from the other side. Carbon dioxide is only about 0.04% of the air, but it absorbs infrared strongly. Human activity, mainly burning fossil fuels, has raised its amount by roughly half since the 1700s. Less infrared now escapes, so the Earth absorbs more than it emits, and the surface warms until enough escapes again. That is the physics behind global warming.

How can you explore it?

In our conduction, convection and radiation simulation, choose Radiation. With the Emitting test, compare the Detector reading with the Water temperature at the start set to 50 °C and then to 95 °C: the hotter cube emits more. Then switch the Test to Absorbing and press Play. The Black plate warms quickly at first, then levels off once its losses catch up with what it absorbs. To see where infrared sits among the other waves, open the electromagnetic spectrum simulation.

Common mistakes

  • Thinking only hot objects emit. Every object emits infrared. Cold ones simply emit less.
  • Saying an object at a steady temperature has stopped emitting. It is emitting as fast as it absorbs.
  • Treating "black body" as a colour. It means a perfect absorber. A hot black body can glow brightly.
  • Saying hotter objects emit only short wavelengths. They emit more at every wavelength, long ones included. The peak moves to shorter wavelengths.
  • Saying greenhouse gases trap sunlight. They let most sunlight through. They absorb some of the infrared the Earth emits.

Key points

  • Everything emits and absorbs infrared. The hotter an object, the more it emits each second.
  • A perfect black body absorbs all the radiation that falls on it, so it is also the best emitter.
  • As temperature rises, the peak of the emission moves to shorter wavelengths.
  • Temperature is steady when absorption and emission happen at the same rate.
  • The Earth's temperature depends on how much sunlight is reflected and absorbed, and how much infrared escapes to space.