Correcting Short and Long Sight: Which Lens Fixes Each, and Why
Learn what the near point and far point are, where a short-sighted or long-sighted eye focuses light, why a diverging lens corrects short sight and a converging lens corrects long sight, and how to turn a glasses prescription in dioptres into a focal length.
Published · 8 min read
On this page
- How does a healthy eye focus light?
- What are the near point and the far point?
- Why does short sight blur distant objects?
- How does a diverging lens correct short sight?
- Why does long sight blur near objects?
- How does a converging lens correct long sight?
- What is the power of a lens?
- Common mistakes
- Key points
Short sight (myopia) means near objects look sharp but distant ones look blurred. Rays from a distant object meet at a point in front of the retina, not on it. It is corrected with a diverging (concave) lens, which spreads the light out a little before it enters the eye.
Long sight (hypermetropia, also called hyperopia) means distant objects look sharp but near ones look blurred. Rays from a near object would meet at a point behind the retina. It is corrected with a converging (convex) lens, which bends the light inwards a little before it enters the eye.
One way to remember it: for the length of the eyeball, a short-sighted eye bends light too much, so a diverging lens takes some bending away. A long-sighted eye bends light too little, so a converging lens adds some.
How does a healthy eye focus light?
Light enters through the clear front of the eye, the cornea, and then passes through the lens. Both refract the light. Rays from one point on an object are brought together again at one point on the retina, the light-sensitive layer at the back of the eye. The image there is real, inverted and much smaller than the object. The brain sorts out which way up things are.
Muscles around the lens change its shape. It becomes thinner to bend light less for a distant object, and fatter to bend light more for a near one. So a healthy eye can focus at many distances.
What are the near point and the far point?
The near point is the closest point that the eye can see clearly. For a typical adult eye, textbooks take it as about 25 cm. The near point moves further away with age, which is why many older people hold a phone at arm's length to read it.
The far point is the furthest point that the eye can see clearly. For a healthy eye it is a very long way off: you can focus on stars and distant hills. In physics, this is often described as "at infinity".
- In short sight, the far point is too close. Anything beyond it looks blurred.
- In long sight, the near point is too far away. Anything closer than it looks blurred.
Why does short sight blur distant objects?
In a short-sighted eye, the eyeball is a little too long, or the cornea and lens bend light too strongly. Rays from a distant object arrive almost parallel. They meet before they reach the retina, then spread apart again. So each point on the object makes a small blurred patch on the retina instead of a sharp point.
Light from a near object arrives spreading out more steeply, so it needs extra bending. The over-strong eye can provide it, which is why near objects stay sharp.
How does a diverging lens correct short sight?
A diverging spectacle lens spreads the rays out slightly before they reach the eye. To the eye, light from a distant object now seems to come from a point much closer, within the far point. The eye can focus light from there, so a sharp image lands on the retina.
In ray-diagram terms, the spectacle lens forms a virtual, upright, diminished image of the distant object, quite close to the eye. The eye looks at that image.
Why does long sight blur near objects?
In a long-sighted eye, the eyeball is a little too short, or the lens is too weak. Light from a distant object needs the least bending, so the eye can still focus it. Light from a near object is spreading out steeply, and the eye cannot bend it enough. The rays would meet behind the retina, so the image on the retina is blurred.
Most people also develop presbyopia from their forties onwards: the lens stiffens, so the eye cannot focus as close as it used to. Converging lenses, often as reading glasses, correct this too.
How does a converging lens correct long sight?
A converging spectacle lens bends the rays inwards a little before they enter the eye. Light from a near object then spreads out less, as if it came from further away, beyond the near point. The eye can now focus it on the retina.
In ray-diagram terms, the near object sits closer to the spectacle lens than its focal length. So the lens forms a virtual, upright, magnified image further from the eye, just like a magnifying glass. The eye looks at that image.
What is the power of a lens?
Opticians describe a lens by its power rather than its focal length. A lens that bends light more strongly has a shorter focal length and a bigger power:
Here f is the focal length in metres, and the power P is in dioptres (D). One dioptre is 1 m⁻¹. A converging lens has a positive focal length, so its power is positive. A diverging lens has a negative focal length, so its power is negative. That is why a prescription for short sight carries a minus sign, such as −2.00, while one for long sight carries a plus sign.
Worked example 1: reading two prescriptions
A student in Karachi has glasses marked −2.5 D. Their grandmother's reading glasses are marked +2.0 D. Find the focal length of each lens and say what kind of lens it is.
Student's glasses: m. The minus sign shows a diverging lens, with a focal length of 40 cm. It corrects short sight.
Grandmother's glasses: m. This is a converging lens with a focal length of 50 cm, used for close work such as reading.
Worked example 2: from focal length to power
An optician in Toronto checks two lenses. Lens X is converging, with a focal length of 40 cm. Lens Y is diverging, with a focal length of 20 cm. Find the power of each.
Convert to metres: for X, m. For Y, the lens is diverging, so m.
Lens X: D
Lens Y: D
Answer: lens Y is stronger, because the size of its power is bigger, even though it spreads light out.
Worked example 3: choosing a lens from the far point (going further)
This example goes beyond GCSE and IGCSE. A short-sighted student in Seoul can see clearly only up to 50 cm away. What lens do they need?
Rays from a very distant object reach the spectacle lens parallel. A diverging lens makes them spread out as if from its principal focus. So the lens should place that focus at the student's far point, 50 cm in front of the eye. Ignoring the small gap between the glasses and the eye, m.
Power: D
Answer: a diverging lens with a power of −2.0 D.
Short sight is becoming more common worldwide. One widely quoted 2016 study projected that roughly half of the world's population could be short-sighted by 2050.
In our lenses and ray diagrams simulation, open the Set-ups menu and choose Short sight. A concave lens forms an upright, virtual image of a distant object much nearer the eye. Then choose Long sight: the near object sits inside F of a convex lens, which forms an upright, virtual image further from the eye. A note under the readouts explains each set-up, and the distances are scaled down to fit the bench.
Common mistakes
- Swapping the lenses. Short sight needs a diverging (concave) lens. Long sight needs a converging (convex) lens.
- Putting the focus on the wrong side. In short sight, rays from far away meet too soon, before the retina. In long sight, rays from close by would meet too late, beyond it.
- Thinking "long sight" means seeing further than normal. It means near objects are blurred.
- Using centimetres in . Convert the focal length to metres first: 25 cm is 0.25 m.
- Dropping the minus sign. A diverging lens has a negative focal length and a negative power.
- Saying the glasses repair the eye. They only change the light before it enters. Take them off and the blur returns.
Key points
- The near point is the closest point you can see clearly (about 25 cm for a typical adult). The far point is the furthest.
- Short sight: distant objects look blurred, as their rays meet too soon, before the retina. A diverging lens fixes it.
- Long sight: near objects look blurred, as their rays would meet behind the retina. A converging lens fixes it.
- Each spectacle lens forms a virtual, upright image at a distance the eye can focus on.
- Lens power , with f in metres, measured in dioptres. Converging lenses have positive power, and diverging lenses negative power.