Skip to content

Background Radiation Explained: Sources, Doses and Corrected Count Rates

Learn the natural and man-made sources of background radiation, roughly how much each one adds, how location and occupation change a person's dose in millisieverts, and how to subtract background from GM tube readings, including in half-life questions.

Published · 8 min read

On this page

Background radiation is the low level of ionising radiation that surrounds us all the time, wherever we are. Most of it comes from natural sources: radon gas from the ground, rocks and building materials, cosmic rays from space, and radioactive atoms in our food, drink and bodies. A smaller part comes from man-made sources. For most people the main one is medicine, such as X-rays and scans. Old nuclear weapons tests, nuclear accidents and the nuclear industry add only tiny amounts.

In most places, radon is the largest single source. Background radiation matters in the lab too. A Geiger–Müller (GM) tube keeps clicking even with no source nearby. So you measure this background count rate first, then subtract it from every reading you take with a source.

Where does background radiation come from?

Natural sources

  • Radon gas. Uranium in rocks and soil decays very slowly, and radon, a radioactive gas, is one of the products. It seeps out of the ground and can collect indoors, especially in rooms with poor ventilation. When people breathe it in, radon and the atoms it decays into give out alpha particles inside the lungs.
  • Rocks and buildings. Granite and some other rocks, and building materials made from them, give out gamma rays.
  • Cosmic rays. Fast particles from space and from the Sun crash into the upper atmosphere and make showers of radiation. The air above us acts as a shield, so the dose is higher on mountains and in aircraft.
  • Food and drink. Almost everything we eat contains tiny amounts of radioactive isotopes, such as potassium-40 and carbon-14. So our own bodies are slightly radioactive.

Man-made sources

  • Medical uses, such as X-rays, CT scans and radioactive tracers.
  • Fallout from nuclear weapons tested in the open air, mostly in the 1950s and 1960s.
  • Nuclear accidents, such as Chernobyl in Ukraine in 1986 and Fukushima in Japan in 2011.
  • The nuclear industry, which releases very small amounts during normal running.

How much does each source add?

The shares change from country to country, and even from house to house. These rough figures are for an average person in the UK, from a 2025 review by the UK Health Security Agency. Treat them as approximate.

SourceApproximate share of a person's yearly dose (UK)
Radon gas (outside work)a little under half
Medical usesroughly 16%
Rocks and buildingsroughly 14%
Cosmic raysroughly 13%
Food, drink and the bodyroughly 10%
Radon and cosmic rays at workroughly 4%
Weapons fallout, accidents and the nuclear industrywell under 1%

In total, a person in the UK receives about 2.6 mSv a year on average. Worldwide, natural sources alone give an average of roughly 2.4 to 3 mSv a year (older and newer UN estimates differ), but some people receive several times this. In countries where CT scans are very common, such as the USA, medical uses make up a much bigger share, close to half of the yearly total in some estimates.

What is a radiation dose?

A radiation dose tells you how much harm the radiation reaching a body is likely to cause. Its unit is the sievert (Sv). One sievert is a very large dose, so everyday doses are given in millisieverts (mSv):

1 Sv=1000 mSv1\ \text{Sv} = 1000\ \text{mSv}

Some rough comparisons:

  • A chest X-ray: about 0.014 mSv.
  • A flight across the Atlantic: about 0.08 mSv.
  • A CT scan of the chest: several millisieverts.

The ICRP, an international expert body, recommends limiting the extra dose to members of the public from man-made sources to 1 mSv a year, not counting medical uses or natural background. For people who work with radiation, the recommended limit is 20 mSv a year, averaged over five years.

How do location and occupation change your dose?

Location matters because rocks, soil and height above sea level vary:

  • Homes built on granite, as in Cornwall in the UK, can collect more radon. A fan under the floor can draw it away.
  • Cosmic rays are stronger higher up. People in La Paz, Bolivia, about 3600 m above sea level, receive more from cosmic rays than people living on the coast.
  • Some beaches in Kerala, India, have sand rich in thorium. In places, background levels there are several times the world average.

Occupation matters because some jobs bring people closer to sources. Airline crews spend long hours high in the atmosphere. Radiographers work near X-ray machines and radioactive tracers. Nuclear power workers, and miners in mines where radon collects, can also receive more. Hospital and nuclear workers often wear a dosimeter, a small badge that records their dose so it can be checked and kept low.

Worked example 1: a flight attendant's extra dose

A flight attendant on long-haul routes spends 800 hours a year in the air. At cruising height, cosmic rays add about 0.005 mSv every hour. This is a rough figure: the real value depends on height, route and activity on the Sun. Estimate the flight attendant's extra dose for the year, and compare it with the UK average total of 2.6 mSv.

Equation: extra dose = dose per hour × time

Substitution: extra dose =0.005×800= 0.005 \times 800

Answer: about 4.0 mSv a year. That is about one and a half times an average person's total, so the flight attendant's yearly dose, 4.0 + 2.6 = 6.6 mSv, is about two and a half times the average.

Why do you subtract background from a count rate?

A GM tube cannot tell where radiation comes from. It counts background radiation in just the same way as radiation from a source. So every reading taken with a source includes background counts as well as counts from the source.

To measure the background, move every source well away from the detector and count for several minutes. Decay is random, so short counts jump around. Divide the total count by the time. Then, for every reading with the source:

corrected count rate=measured count rate−background count rate\text{corrected count rate} = \text{measured count rate} - \text{background count rate}

A school lab often records roughly 15 to 30 counts per minute of background.

Worked example 2: correcting a reading

In a lab in Islamabad, a GM tube records 96 counts in 4 minutes with no source nearby. With a source in place, it records 1422 counts in 3 minutes. Find the corrected count rate in counts per minute and in counts per second.

Background count rate: 96÷4=2496 \div 4 = 24 counts/min

Count rate with the source: 1422÷3=4741422 \div 3 = 474 counts/min

Corrected count rate: 474−24=450474 - 24 = 450 counts/min

Answer: 450 counts/min, which is 450÷60=7.5450 \div 60 = 7.5 counts/s.

Worked example 3: half-life with background

A source has a half-life of 2.0 minutes. The background count rate is 20 counts/min. At the start, the counter reads 500 counts/min. What will the counter read 8.0 minutes later?

Corrected start: 500−20=480500 - 20 = 480 counts/min

Number of half-lives: 8.0÷2.0=48.0 \div 2.0 = 4

Corrected rate after 4 half-lives: 480÷24=480÷16=30480 \div 2^4 = 480 \div 16 = 30 counts/min

Add the background back: 30+20=5030 + 20 = 50 counts/min

Answer: the counter reads about 50 counts/min. Halving the raw 500 counts/min four times gives about 31 counts/min, which is wrong. The background does not decay: it stays at 20 counts/min the whole time.

The same idea explains why uncorrected readings make a half-life look too long. Late in an experiment, the background is a large part of each reading, so the readings level off instead of falling towards zero.

In our radioactive decay and half-life simulation, the GM tube picks up background for the lab isotopes, protactinium-234m and radon-220. Under Detector (GM tube), set the Background count rate, choose the Count rate graph and press Play. Then turn Subtract the background off, and watch the uncorrected readings level out and take longer to halve. In the alpha, beta and gamma simulation, choose None as the source to measure the background on its own. The Corrected count rate card takes the Background count rate setting away from each reading for you.

Common mistakes

  • Forgetting the background. Subtract it from every reading before doing anything else.
  • Halving the raw reading in half-life questions. Halve the corrected rate, then add the background back if the question asks what the counter shows.
  • Mixing units. Change counts per minute and counts per second into the same unit before you subtract.
  • Thinking background is all man-made. Most of it is natural, and radon is usually the largest part.
  • Measuring the background for only a few seconds. Counts are random, so a long count gives a fairer average.

Key points

  • Background radiation is around us all the time, from natural and man-made sources.
  • Radon gas is usually the biggest single source. Medical uses are the biggest man-made source for most people.
  • Location and occupation both change a person's yearly dose, which is measured in sieverts (Sv) or millisieverts (mSv).
  • To correct a reading, take the background count rate away from the measured count rate.
  • In half-life questions, the source's count rate halves, but the background stays the same.