Skip to content

Resultant Force and Free-Body Diagrams: How to Draw Them and Use Them

Learn to draw clear free-body diagrams, combine forces along a line, find the resultant of two perpendicular forces by calculation or scale drawing, and split a force into components.

Published · 8 min read

On this page

A resultant force is the one force that could replace all the forces on an object and do exactly the same job. If three people push a table in different ways, the resultant tells you what the table will actually do.

To find it, you first need every force on the object. A free-body diagram shows them: the object on its own, with each force drawn as a labelled arrow. Then you combine the forces. Along a straight line, add the forces that point one way and subtract the ones that point the other way. For two forces at right angles, use Pythagoras' theorem.

If the resultant force is zero, the forces are balanced. The object is then either at rest or moving in a straight line without speeding up or slowing down. It does not have to be still.

What is a resultant force?

Force is a vector. It has a size, in newtons (N), and a direction. So you cannot simply add the numbers. You must take the directions into account.

For forces along one line, call one direction positive and the opposite direction negative. Then add everything up, signs included.

Worked example 1: a ferry leaving port

A small ferry pulls away from a pier in Istanbul. Its engine gives a forward thrust of 9000 N. The water resists with 6500 N, and a head wind pushes back with another 1500 N. Find the resultant force.

Given: thrust = 9000 N forwards, water resistance = 6500 N backwards, wind = 1500 N backwards

Sign choice: forwards is positive.

Equation: resultant = sum of the forces, with signs

Substitution: resultant = 9000 − 6500 − 1500

Answer: resultant force = 1000 N forwards, so the ferry speeds up.

A minute later, the ferry is faster and the water resistance has grown to 7500 N. Now 9000 − 7500 − 1500 = 0. The forces are balanced, and the ferry cruises on at a steady speed.

How do you draw a free-body diagram?

Follow these five steps:

  1. Choose one object. Draw it as a simple box or a dot, with nothing else around it.
  2. Find every force acting on it. Weight always acts near the Earth. Then check each thing touching the object, since each contact usually supplies a force. Finally, think about magnetic or electrostatic forces.
  3. Draw an arrow for each force. Start it on the object and point it the way the force acts.
  4. Match the lengths to the sizes. A force twice as big gets an arrow twice as long. Equal forces get equal arrows.
  5. Label every arrow with the force's name and, if you know it, its size in newtons.

Only forces acting on the object belong on its diagram. A car's tyres push backwards on the road, but that force acts on the road, so leave it off. Do not add the resultant as an extra force either. If you want to show it, draw it apart from the other forces and label it clearly, as the simulation does with its striped arrow.

Which forces should you include?

ForceDirectionWhere it comes from
WeightStraight downThe gravitational pull of the Earth
Normal contact forceAt 90° to the surface, pushing away from itA floor, table or wall the object presses on
FrictionAlong the surface, against the sliding (or the way it would slide)Two surfaces rubbing or gripping
Air resistance or dragOpposite to the motionMoving through air or water
TensionAlong the rope, pulling away from the objectA stretched rope, string or cable
UpthrustUpA liquid or gas around the object
Thrust or driving forceForwardsAn engine, a propeller or a push

Three quick examples

  • A lamp hanging from a ceiling: tension up and weight down. The arrows are the same length, because the lamp is still.
  • A car at a steady speed on a flat road: weight down and the normal contact force up, equal in length. Driving force forwards, and air resistance plus friction backwards, also equal in total.
  • A crate being pushed across a floor and speeding up: weight and the normal contact force, equal and opposite. The push forwards is drawn longer than the friction backwards.

Build diagrams like these in the resultant force simulation. Add force arrows to the object and watch the resultant update.

Do balanced forces mean an object is not moving?

No. Many students believe this, but it is wrong. Balanced forces mean the resultant force is zero. By Newton's first law, the motion then stays the same. That leaves two possibilities:

  • The object is at rest, and it stays at rest.
  • The object is moving, and it keeps the same speed and direction.

A coach cruising at a steady 100 km/h along a straight stretch of the motorway from Lahore to Islamabad has balanced forces on it. So does a passenger jet in straight, level flight at a constant speed: lift balances weight, and thrust balances drag. Forces are what change motion. Carrying on at a steady velocity needs no resultant force at all.

If the resultant is not zero, the forces are unbalanced. The object accelerates in the direction of the resultant. It may speed up, slow down or change direction.

How do you find the resultant of two forces at right angles?

Draw the two forces head to tail. The second arrow starts where the first one ends. The resultant runs from the start of the first arrow to the end of the second. The three arrows form a right-angled triangle.

Pythagoras' theorem gives the size of the resultant:

R=F12+F22R = \sqrt{F_1^2 + F_2^2}

Trigonometry gives its direction. If θ is the angle between the resultant and the first force:

tan⁡θ=F2F1\tan\theta = \frac{F_2}{F_1}

Worked example 2: two ropes on a crate

Two dock workers in Durban pull on the same crate with ropes. One pulls east with 45 N. The other pulls north with 28 N. Find the size and direction of the resultant of the two pulls.

Given: F1F_1 = 45 N east, F2F_2 = 28 N north, at 90° to each other

Equation: R=F12+F22R = \sqrt{F_1^2 + F_2^2}

Substitution: R=452+282=2025+784=2809R = \sqrt{45^2 + 28^2} = \sqrt{2025 + 784} = \sqrt{2809}

Size: R = 53 N

Direction: tan⁡θ=2845=0.622\tan\theta = \dfrac{28}{45} = 0.622, so θ=32∘\theta = 32^\circ (2 significant figures)

Answer: 53 N at 32° north of east

Adding the sizes, 45 + 28 = 73 N, would be wrong. Two forces only add up fully when they point the same way. At any other angle, the resultant is smaller than their sum.

How do you use a scale drawing?

You can reach the same answer with a ruler and a protractor.

  1. Choose a scale, for example 1 cm to 5 N.
  2. Draw an arrow 9.0 cm long pointing east.
  3. From its tip, draw an arrow 5.6 cm long pointing north.
  4. Join the start of the first arrow to the tip of the second. This line is the resultant.
  5. Measure it. It should be about 10.6 cm long, which stands for 53 N.
  6. Measure the angle at the start with a protractor. It should be about 32°.

Scale drawings also work when the forces are not at right angles, where Pythagoras cannot help. Use a sharp pencil and a large scale.

How do you resolve a force into components?

Resolving is adding in reverse. You split one force into two parts at right angles, usually horizontal and vertical. Acting together, the two parts do exactly the same job as the original force. In some courses this is Higher tier only. Others, including the Punjab textbooks, expect every student to do it.

For a force F at an angle θ above the horizontal:

Fx=Fcos⁡θFy=Fsin⁡θF_x = F\cos\theta \qquad F_y = F\sin\theta

Worked example 3: pulling a suitcase

A traveller at Dubai airport pulls a wheeled suitcase with a force of 50 N along the handle. The handle is at 35° to the horizontal. Find the horizontal and vertical components of the pull.

Given: F = 50 N, θ = 35°

Equations: Fx=Fcos⁡θF_x = F\cos\theta and Fy=Fsin⁡θF_y = F\sin\theta

Horizontal: Fx=50×cos⁡35∘=40.96F_x = 50 \times \cos 35^\circ = 40.96

Vertical: Fy=50×sin⁡35∘=28.68F_y = 50 \times \sin 35^\circ = 28.68

Answer: 41 N horizontally and 29 N upwards (2 significant figures)

Only the 41 N part drags the suitcase forwards. The 29 N part holds up some of the suitcase's weight, so the floor pushes up on the wheels a little less.

Try this in the vector addition and resolution simulation. As the angle gets bigger, the horizontal component shrinks and the vertical one grows.

Common mistakes

  • Including forces the object exerts. Only forces acting on the object go on its diagram.
  • Adding the resultant as one more force. The resultant replaces the other forces. It is not extra.
  • Forgetting the weight. Every object near the Earth has weight.
  • Thinking balanced forces mean "not moving". The object could be moving at a constant velocity.
  • Adding perpendicular forces like numbers on a line. Use Pythagoras or a scale drawing.
  • Drawing the normal contact force straight up on a slope. It acts at 90° to the surface.
  • Giving a size without a direction. Write, for example, "53 N at 32° north of east".
  • Mixing up sin and cos. The component next to the angle θ uses cos.

Key points

  • The resultant force is one force that does the same job as every force on the object combined.
  • Along a line, choose a positive direction and add the forces with their signs.
  • A free-body diagram shows one object and every force acting on it, with arrow lengths that match the sizes.
  • A zero resultant force means the object is at rest or moving at a constant velocity.
  • For two forces at right angles, R=F12+F22R = \sqrt{F_1^2 + F_2^2} and tan⁡θ=F2/F1\tan\theta = F_2 / F_1. A scale drawing gives the same answer.
  • A force F at angle θ to the horizontal has components Fcos⁡θF\cos\theta and Fsin⁡θF\sin\theta.