Newton's Laws of Motion Explained: Inertia, F = ma and Force Pairs
A plain-language guide to Newton's three laws: what inertia means, how to find the resultant force, how to use F = ma, and why the book on the table is not a third-law pair.
Published · 8 min read
On this page
Newton's three laws of motion describe how forces change the way things move. Here they are in plain language:
- First law: an object stays still, or keeps moving at a steady speed in a straight line, unless a resultant force acts on it.
- Second law: a resultant force makes an object accelerate. The acceleration depends on the force and the mass: .
- Third law: when two objects interact, they push or pull on each other with forces that are equal in size and opposite in direction.
The key idea in all three laws is the resultant force. This is the single force that has the same effect as all the forces on an object added together. If the resultant force is zero, the motion does not change. If it is not zero, the object speeds up, slows down or changes direction.
This guide explains each law, with worked examples, and clears up the most common confusion about force pairs.
What is a resultant force?
Most objects have several forces acting on them at once. To find the resultant force along a line, add the forces that act in one direction. Then subtract the forces that act in the opposite direction.
For example, a cyclist in Amsterdam pedals with a driving force of 120 N. Air resistance and friction push back with a total of 80 N. The resultant force is 120 − 80 = 40 N forwards, so the cyclist speeds up.
If the forces on an object cancel out, the resultant force is zero. We say the forces are balanced and the object is in equilibrium.
A free-body diagram helps you see this. Draw the object as a dot, then add a labelled arrow for each force acting on it. Longer arrows show bigger forces. You can practise this in the free-body diagram and resultant force simulation.
What does Newton's first law say?
The first law says that a resultant force is needed to change motion, not to keep it going.
- If an object is stationary and the resultant force is zero, it stays stationary.
- If an object is moving and the resultant force is zero, it keeps moving at the same speed in the same direction.
This surprises many people. On Earth, moving objects usually slow down, but only because friction and air resistance act on them. Far out in space, almost nothing slows a spacecraft down. With its engines off, it keeps moving at a constant velocity.
A skydiver at terminal velocity is a good example. Their weight acts downwards and air resistance acts upwards. The two forces are equal, so the resultant force is zero. The skydiver is still falling, but at a constant speed.
What is inertia?
Inertia is the tendency of an object to keep doing what it is already doing. It resists any change to its motion. When a bus in Karachi brakes suddenly, the passengers lurch forwards. No force pushes them forwards. Their bodies simply keep moving while the bus slows down.
Mass is a measure of inertia. An object with more mass is harder to start, harder to stop and harder to turn. An empty supermarket trolley is easy to push. A full one needs a much bigger force to give it the same acceleration.
How do you use F = ma?
Newton's second law links the resultant force, the mass and the acceleration:
Here F is the resultant force in newtons (N), m is the mass in kilograms (kg) and a is the acceleration in m/s². The acceleration is always in the same direction as the resultant force.
One newton is the force that gives a mass of 1 kg an acceleration of 1 m/s². If you double the resultant force, the acceleration doubles. If you double the mass, the acceleration halves.
The rearranged forms are:
Worked example 1: a car pulling away
A car in Lahore has a mass of 1200 kg. The engine gives a driving force of 3000 N. Friction and air resistance give a total backward force of 600 N. Find the acceleration.
Given: m = 1200 kg, driving force = 3000 N, resistive force = 600 N
Resultant force: F = 3000 − 600 = 2400 N forwards
Equation:
Substitution:
Answer: forwards
Worked example 2: a model rocket
A model rocket has a mass of 0.50 kg. Its engine gives an upward thrust of 12 N. Find its acceleration just after launch. Use g = 9.8 N/kg and ignore air resistance.
Weight: downwards
Resultant force: F = 12 − 4.9 = 7.1 N upwards
Equation:
Substitution:
Answer: upwards (2 significant figures)
If you forget the weight, you get 24 m/s², which is far too big. To see how force and mass change the acceleration, try the force, mass and acceleration simulation. Double the force, then double the mass, and compare.
What does Newton's third law say?
When two objects interact, each one exerts a force on the other. These two forces form a third-law pair. A true pair always follows four rules:
- The two forces are the same type of force: both gravitational, both contact forces, both magnetic, and so on.
- They are equal in size.
- They act in opposite directions.
- They act on different objects.
Here are some examples:
- A swimmer pushes water backwards. The water pushes the swimmer forwards.
- A rocket pushes hot gas downwards out of its engine. The gas pushes the rocket upwards.
- The Earth pulls you down with a gravitational force, your weight. You pull the Earth up with an equal gravitational force.
That last one seems strange. A student with a mass of 60 kg has a weight of 588 N, so they pull the Earth upwards with 588 N. But the Earth's mass is about kg, so its acceleration is only about .
If the forces in a pair are equal and opposite, why does anything move? Because the two forces act on different objects. Each object responds only to the forces that act on it. So the forces in a pair never cancel each other out.
Worked example 3: a lorry and a car collide
A lorry of mass 12 000 kg and a car of mass 1000 kg collide. At one moment, the lorry pushes on the car with a force of 30 000 N. Find the force on the lorry and the acceleration of each vehicle at that moment. Ignore all other forces.
Force on the lorry: by the third law, the car pushes on the lorry with 30 000 N in the opposite direction.
Equation:
Car:
Lorry:
The forces are equal, but the car's acceleration is 12 times bigger, because its mass is 12 times smaller.
Why is the book on the table not a third-law pair?
A book rests on a table. Two forces act on it:
- its weight: the Earth pulls it down with a gravitational force
- the normal contact force: the table pushes it up
These two forces are equal and opposite, so many students call them a third-law pair. They are not. Both forces act on the same object, the book, and they are different types of force. They are equal because the book is in equilibrium. That is the first law, not the third.
Each force has its own partner somewhere else:
| Force on the book | Type | Its third-law partner |
|---|---|---|
| The Earth pulls the book down | Gravitational | The book pulls the Earth up |
| The table pushes the book up | Contact | The book pushes the table down |
Here is a quick test. Write the force as "A acts on B". Its partner must be "B acts on A", with the same type of force. You can check more pairs in the Newton's third law simulation.
Common mistakes
- Thinking a moving object needs a resultant force. Constant velocity means the resultant force is zero.
- Using one force instead of the resultant. Add and subtract all the forces along the line first.
- Mixing up mass and weight. Mass is measured in kg. Weight is a force, measured in N. Use the mass in F = ma.
- Forgetting to convert grams. 500 g is 0.50 kg.
- Calling weight and the normal contact force a third-law pair. They act on the same object.
- Thinking the heavier object pushes harder. In a collision, both objects feel forces of the same size. The one with less mass has the bigger acceleration.
Key points
- First law: if the resultant force is zero, an object stays at rest or keeps moving at a constant velocity.
- Inertia is the tendency to resist changes in motion. Mass is a measure of inertia.
- Second law: , where F is the resultant force in N, m is in kg and a is in m/s².
- The acceleration is always in the direction of the resultant force.
- Third law: two interacting objects exert forces on each other that are equal in size, opposite in direction and of the same type.
- Third-law forces act on different objects, so they never cancel out.