Skip to content

Forces simulation

Force, Mass and Acceleration Simulation

Release a trolley on a level track, pulled by a steady force or by a hanging mass over a pulley. Change the masses and friction, read the acceleration from light gates and a velocity–time graph, and build your own results graph to test F = ma.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

On a smooth track, a 1.0 kg trolley speeds up at 1.0 m/s² when a steady 1.0 N pull acts on it. The pull is doubled to 2.0 N. What will the acceleration be?

Try this

  1. 1Press play with the starting set-up (100 g hanging, 0.9 kg trolley). Compare the acceleration readout with the light-gate value and with the gradient of the velocity–time graph.
  2. 2Press Move 100 g to the hanger, play, then press Record. Repeat until 0.5 kg hangs. Choose a against F: do the points form a straight line passing through the origin?
  3. 3Press Clear table. Set Pulled by to Applied force and leave it at 1.0 N. Record runs with 0, 0.5 and 1 kg of masses on the trolley, then plot a against 1/m.
  4. 4Choose the set-up 100 g hanging, 0.9 kg trolley. Turn on Friction on the trolley and raise the friction coefficient until the trolley stays still. What is the tension in the string now, compared with the weight of the hanging mass?
  5. 5Watch the velocity–time graph at the moment the hanging mass lands. Why is the line flat afterwards with friction off, but sloping down with friction on?

What this simulation shows

A trolley sits on a level runway on a lab bench. You can pull it with a steady applied force, or tie a string to it, run the string over a pulley and hang slotted masses on the end. Press play and the trolley is released from rest. Force arrows, readouts and a live velocity–time graph show how force, mass and acceleration fit together in F=maF = ma.

The scene is drawn to scale. While the string is tight, the hanging mass drops exactly as far as the trolley rolls, and the two move with the same acceleration.

Pulling with a hanging mass

This is where many exam answers go wrong. The weight of the hanging mass, mhgm_h g, drives the motion, but it has to accelerate both objects: the trolley and the hanging mass itself. With no friction,

a=mhgmt+mha = \frac{m_h g}{m_t + m_h}

so a 0.1 kg mass on a 0.9 kg trolley gives one tenth of gg, not one ninth. Watch the arrows on the hanging mass. The string pulls up on it with a tension smaller than its weight, because the mass is speeding up on its way down. The tension is only as big as it needs to be to accelerate the trolley: T=mtaT = m_t a, plus the friction force when friction is switched on.

When the mass reaches the floor the string goes slack. Nothing pulls the trolley forwards any more, so it rolls on at a steady speed until the buffer at the end of the track stops it. With friction on, it slows down instead, and it may come to rest before it reaches the buffer.

Measuring acceleration with light gates

A card of known length stands on top of the trolley. Each light gate times how long the card blocks its beam, and the card length divided by that time gives the speed through the gate. The timer also records the time between the two gates, so

a=v2−v1ta = \frac{v_2 - v_1}{t}

The panel also works out a=(v22−v12)÷2sa = (v_2^2 - v_1^2) \div 2s from the distance between the gates. Both results appear beside the model value from resultant force ÷ mass, so you can judge how well each measuring method agrees with the theory.

Why masses move from the trolley to the hanger

To find out how acceleration depends on force, the mass being accelerated must not change. Putting extra masses on the hanger would increase the force and the mass at once. Moving a 100 g piece from the trolley to the hanger raises the pull while the total, mt+mhm_t + m_h, stays fixed. Use the move buttons, record each run, and the points on a graph of aa against FF fall on a straight line through the origin.

To find the effect of mass, keep the force the same and change the masses on the trolley instead, then plot aa against 1/m1/m.

Friction and your results

Friction here is a simple model: a coefficient μ\mu multiplied by the normal contact force on the trolley. It is a value chosen for the simulation, not a measurement. If the pull is no bigger than the greatest friction force, the trolley does not move at all. With friction on, the graph of aa against FF is still straight, but it meets the force axis to the right of the origin. That gap is the friction that has to be overcome first. In a real lab the runway is often tilted very slightly, until a gentle nudge keeps the trolley rolling at a steady speed, so that friction is cancelled out.

Equations

Check your understanding

8 questions

  1. 1.A resultant force of 6.0 N acts on a 1.5 kg trolley. What is its acceleration?
  2. 2.A 0.2 kg mass hangs from a string over a pulley and pulls a 0.8 kg trolley along a smooth track. Taking g = 10 N/kg, what is the acceleration?
  3. 3.In the same set-up, what is the tension in the string?
  4. 4.Why does the practical shift pieces from the trolley onto the hanger, rather than adding new masses to the hanger?
  5. 5.A card 5.0 cm long blocks a light gate for 0.040 s. What is its average speed through the gate?
  6. 6.Two light gates give a trolley's speed as 0.40 m/s and then 1.0 m/s, with 0.50 s between them. What is the acceleration?
  7. 7.With friction acting on the trolley, a student plots acceleration against pulling force. What shape is the line?
  8. 8.The resultant force on a trolley stays the same while its mass is doubled. What happens to its acceleration?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more