Skip to content

Momentum and Conservation of Momentum: Collisions and Explosions

Learn what momentum is, why direction matters, how to use conservation of momentum in collisions and explosions, and how car safety features use force and momentum.

Published · 7 min read

On this page

Momentum is mass multiplied by velocity:

p=mvp = m v

Here p is the momentum in kilogram metres per second (kg m/s), m is the mass in kg and v is the velocity in m/s. A heavy lorry has a lot of momentum, even at a low speed. A slow, light object has very little.

The key idea is conservation of momentum. In a closed system, the total momentum before a collision or explosion equals the total momentum after it. Inside the system, momentum is not created or destroyed. It is only passed from one object to another.

Because velocity has a direction, momentum has a direction too. Forgetting that is an easy way to lose marks. This guide shows you how to handle directions with signs, with worked examples.

What is momentum, and what are its units?

The more momentum an object has, the harder it is to stop in a given time. Momentum depends on both mass and velocity.

  • An auto-rickshaw in Lahore with passengers, total mass 400 kg, moving at 8.0 m/s has momentum 400 × 8.0 = 3200 kg m/s.
  • A cricket ball of mass 0.16 kg bowled at 40 m/s has momentum 0.16 × 40 = 6.4 kg m/s.

The unit is kg m/s. You may also see N s (newton seconds). The two units are equal.

Why does direction matter?

Momentum is a vector. Before you start a calculation, choose one direction as positive, usually to the right. Anything moving the other way has a negative velocity, and so a negative momentum.

Two identical trolleys moving towards each other at the same speed have a total momentum of zero. Their momenta are equal in size but opposite in direction, so they cancel.

What is conservation of momentum?

In a closed system, the total momentum stays the same:

total momentum before=total momentum after\text{total momentum before} = \text{total momentum after}

A closed system is one where no external forces act, such as friction from outside. In real life there is always some friction, but during a short collision its effect is usually tiny. So conservation of momentum still gives very good answers.

For two objects, A and B:

mAuA+mBuB=mAvA+mBvBm_A u_A + m_B u_B = m_A v_A + m_B v_B

Here u is the velocity before and v is the velocity after. If the objects stick together, the right-hand side becomes (mA+mB)v(m_A + m_B) v.

Worked example 1: two cars lock together

On an icy road in Toronto, a car of mass 1200 kg moving at 15 m/s hits a stationary car of mass 800 kg. The cars lock together. Find their velocity just after the collision.

Given: mAm_A = 1200 kg, uAu_A = 15 m/s, mBm_B = 800 kg, uBu_B = 0

Momentum before: 1200 × 15 + 800 × 0 = 18 000 kg m/s

Equation: momentum after = (mA+mB)v(m_A + m_B) v

Substitution: 18 000=2000×v18\,000 = 2000 \times v

Answer: v = 9.0 m/s, in the original direction of the first car

Worked example 2: a head-on collision with signs

In a lab, trolley A (2.0 kg) moves to the right at 3.0 m/s. Trolley B (1.0 kg) moves to the left at 4.0 m/s. They collide and stick together. Find their velocity afterwards.

Choose a direction: take right as positive. Then uAu_A = +3.0 m/s and uBu_B = −4.0 m/s.

Momentum before: 2.0 × 3.0 + 1.0 × (−4.0) = 6.0 − 4.0 = +2.0 kg m/s

Equation: 2.0=(2.0+1.0)×v2.0 = (2.0 + 1.0) \times v

Substitution: v=2.03.0v = \dfrac{2.0}{3.0}

Answer: v = +0.67 m/s. The positive sign means the joined trolleys move to the right.

If you forget the minus sign for trolley B, you get 10 kg m/s before and 3.3 m/s after, which is wrong. Try this set-up in the momentum and collisions simulation. Predict the final velocity first, then run it to check.

How does momentum work in explosions and recoil?

In an explosion, objects start together at rest and then fly apart. The total momentum before is zero, so the total momentum after must also be zero. The pieces move off in opposite directions with equal and opposite momenta.

This is why a cannon recoils when it fires, and why a rocket moves forward as it pushes gas backwards.

Worked example 3: skaters pushing apart

Two ice skaters stand still on a rink, facing each other. Skater A has a mass of 50 kg and skater B has a mass of 75 kg. They push apart. Skater A moves off at 3.0 m/s to the right. Find the velocity of skater B.

Given: total momentum before = 0. Take right as positive.

Equation: 0=mAvA+mBvB0 = m_A v_A + m_B v_B

Substitution: 0=50×3.0+75×vB0 = 50 \times 3.0 + 75 \times v_B

Rearrange: vB=−15075v_B = \dfrac{-150}{75}

Answer: vBv_B = −2.0 m/s. Skater B moves at 2.0 m/s to the left.

The lighter skater moves faster. Both have a momentum of 150 kg m/s, in opposite directions.

What is the difference between elastic and inelastic collisions?

Momentum is conserved in every collision in a closed system. Kinetic energy is not always conserved.

  • Elastic collision: total kinetic energy is the same before and after. Collisions between snooker balls, or between gas molecules, are close to elastic.
  • Inelastic collision: some kinetic energy is transferred to other stores, mainly thermal energy, plus some sound. The objects may bend or crumple. When objects stick together, the collision is always inelastic.

Check worked example 1 using Ek=12mv2E_k = \frac{1}{2}mv^2:

  • Kinetic energy before: 12×1200×152=135 000 J\frac{1}{2} \times 1200 \times 15^2 = 135\,000\ \text{J}
  • Kinetic energy after: 12×2000×9.02=81 000 J\frac{1}{2} \times 2000 \times 9.0^2 = 81\,000\ \text{J}

So 54 000 J of kinetic energy was transferred, mostly to thermal energy and to bending the metal. Momentum was conserved, but kinetic energy was not. The collision was inelastic.

In worked example 3, the kinetic energy goes up from 0 to 375 J. That energy came from the chemical store in the skaters' muscles. Momentum was still conserved.

How are force and momentum linked?

A resultant force changes an object's momentum. The force equals the rate of change of momentum:

F=ΔpΔt=mΔvΔtF = \frac{\Delta p}{\Delta t} = \frac{m \Delta v}{\Delta t}

Here Δp is the change in momentum and Δt is the time it takes. Some courses call FΔtF \Delta t the impulse, which equals the change in momentum.

The important result is this. For the same change in momentum, a longer time means a smaller force. This idea is behind many safety features:

  • Crumple zones at the front and back of a car crush slowly, which makes the collision last longer.
  • Seat belts stretch a little, so the passenger slows down over a longer time.
  • Airbags inflate and then squash, which spreads the stop over more time and a larger area.
  • Cycle helmets and crash mats contain material that squashes on impact.
  • Catching a cricket ball: fielders pull their hands back. Stopping a 0.16 kg ball moving at 30 m/s in 0.010 s needs 480 N. Stretching the stop to 0.10 s cuts the force to 48 N.

Worked example 4: why airbags save lives

A passenger of mass 70 kg is in a car that crashes at 15 m/s. Find the average force needed to stop the passenger (a) in 0.010 s, by hitting the dashboard, and (b) in 0.15 s, with a seat belt and airbag.

Change in momentum: Δp = 70 × (0 − 15) = −1050 kg m/s. The size is 1050 kg m/s.

Equation: F=ΔpΔtF = \dfrac{\Delta p}{\Delta t}

(a) F=10500.010=105 000 NF = \dfrac{1050}{0.010} = 105\,000\ \text{N}, or about 1.1×105 N1.1 \times 10^5\ \text{N}

(b) F=10500.15=7000 NF = \dfrac{1050}{0.15} = 7000\ \text{N}

Answer: the seat belt and airbag cut the force by a factor of 15. You can compare stopping times and forces in the impulse and car safety simulation.

Common mistakes

  • Ignoring direction. Choose a positive direction and give velocities in the other direction a minus sign.
  • Saying momentum is lost in an inelastic collision. Momentum is conserved. Kinetic energy is what changes.
  • Adding masses but not momenta. In a sticking collision, divide the total momentum by the total mass.
  • Forgetting that the total is zero in an explosion. The pieces must have equal and opposite momenta.
  • Saying safety features reduce the change in momentum. They increase the time, which reduces the force. The change in momentum stays the same.
  • Wrong units. Momentum is in kg m/s or N s, not kg/m s or N.

Key points

  • Momentum p = mv, measured in kg m/s. It is a vector, so direction matters.
  • In a closed system, total momentum before = total momentum after.
  • In an explosion from rest, the total momentum is zero before and after.
  • Momentum is conserved in all collisions. Kinetic energy is conserved only in elastic collisions.
  • Force = rate of change of momentum, F=ΔpΔtF = \frac{\Delta p}{\Delta t}.
  • Crumple zones, seat belts and airbags increase the stopping time, which reduces the force.