Mains Electricity: AC and DC, Live, Neutral and Earth Wires, Fuses and Safety
Understand AC and DC, mains voltage and frequency in different countries, the jobs of the live, neutral and earth wires, how fuses and circuit breakers work, and how to choose the right fuse.
Published · 8 min read
On this page
Mains electricity is the supply that comes from the sockets in homes, schools and offices. It is an alternating current (AC) supply. The current keeps changing direction, many times every second. Cells and batteries give a direct current (DC), which flows in one direction only.
The mains voltage and frequency depend on the country. In the UK, the supply is about 230 V at 50 Hz. In Pakistan and India, it is commonly taught as 220–230 V at 50 Hz. In the US, it is 120 V at 60 Hz.
Most appliances connect to the mains through a cable with three wires: live, neutral and earth. A fuse or a circuit breaker cuts off the current if it becomes too large. These protect people from shocks and buildings from fires.
What is the difference between AC and DC?
With direct current, charge flows one way only. On a graph of p.d. against time, DC from a battery is a flat horizontal line.
With alternating current, the p.d. of the live wire keeps reversing. It is positive for half of each cycle and negative for the other half. On a graph, it makes a wave. The current changes direction each time the p.d. reverses.
The frequency is the number of complete cycles each second. A frequency of 50 Hz means 50 cycles per second. Each cycle has two changes of direction, so a 50 Hz current changes direction 100 times every second. The time for one cycle is the period:
The "230 V" is an effective value. It heats things as much as a steady 230 V DC supply would. The peak p.d. is higher, about 325 V.
What are the mains voltage and frequency in different countries?
| Country | Mains p.d. | Frequency |
|---|---|---|
| UK and most of Europe | 230 V | 50 Hz |
| Pakistan | 220–230 V | 50 Hz |
| India | 220–230 V | 50 Hz |
| US and Canada | 120 V | 60 Hz |
Textbooks may use 220 V or 230 V. Use the value your course gives you.
What do the live, neutral and earth wires do?
| Wire | Colour (UK and international standard) | Job | p.d. compared with the ground |
|---|---|---|---|
| Live | Brown | Carries the alternating p.d. from the supply to the appliance | About 230 V, alternating |
| Neutral | Blue | Completes the circuit back to the supply | At or close to 0 V |
| Earth | Green and yellow stripes | Safety wire for a metal case; normally carries no current | 0 V |
Much new wiring around the world uses these colours. Older wiring, and some textbooks in South Asia, use red for live, black for neutral and green for earth. In the US, live is usually black, neutral is white, and earth (called "ground") is green or bare copper. Never trust colours alone.
Why is the live wire dangerous?
Your body is usually at about 0 V, the same as the ground. The live wire is at a high p.d. If you touch it, there is a large p.d. across your body, so a current flows through you to the ground. A current of just a few tens of milliamps through the chest can stop the heart.
Why is it still dangerous when the switch is off?
A switch breaks the circuit at one point only. It should be in the live wire. Then, when you switch off, the appliance beyond the switch is cut off from the live supply.
But the live wire before the switch is still connected to the supply. The wiring in the wall, the socket and the cable up to the switch can all still be at a high p.d. Touching any of them can give a fatal shock. The circuit does not need the neutral wire. It can be completed through your body to the ground.
If the switch were wrongly placed in the neutral wire, the whole appliance would stay live even when switched off. Real wiring work is a job for an electrician, who isolates the supply and tests that the wires are dead first.
How does the earth wire protect you?
Many appliances, such as toasters, washing machines and some kettles, have a metal case. The earth wire connects this case to the ground.
Imagine a fault inside the appliance. A loose live wire touches the metal case. Without an earth wire, the case would be at a high p.d., and anyone who touched it could get a severe shock.
With an earth wire, the live wire now has a path to the ground with a very low resistance. A very large current flows, which melts the fuse or trips the circuit breaker at once. The appliance is cut off from the live supply, and the case is safe.
The earth wire and the fuse work together. The earth wire gives the fault current a safe path. The fuse then cuts it off.
You can watch a fault happen, with and without an earth wire, in the mains electricity and safety simulation.
What is double insulation?
Some appliances, such as hairdryers, have a plastic case with no metal parts that you can touch. Plastic is an insulator, so the outside cannot become live. These double-insulated appliances need no earth wire, so their cable has only live and neutral wires. Their symbol is a square inside a square.
How do fuses and circuit breakers work?
A fuse contains a thin wire. If the current becomes too large, the wire gets hot and melts. This breaks the circuit. It is placed in the live wire, so a melted ("blown") fuse cuts the appliance off from the high p.d. It must then be replaced.
Every UK plug contains a fuse. Standard plugs in the US and India have no fuse, and many plugs in Pakistan don't either, although British-style three-pin plugs with a fuse are also used there. Where the plug has no fuse, fuses or circuit breakers in the distribution board protect each circuit instead.
A circuit breaker does the same job without melting. When the current is too large, an electromagnet or a heated bimetallic strip opens a switch. It acts faster than a fuse and can be reset.
Fuses and ordinary circuit breakers mainly protect the wiring and the appliance from overheating and fire. A fuse needs several amps to melt, and a much smaller current can kill. A residual current device (RCD) protects people better. It compares the currents in the live and neutral wires. If they differ by as little as 30 mA, current must be leaking another way, perhaps through a person. The RCD cuts off the supply in a fraction of a second.
How do you choose the right fuse rating?
The fuse rating is the largest current that the fuse can carry without melting. Choose the rating that is just above the normal current of the appliance. Find the normal current from P = IV:
If the rating is too low, the fuse melts when the appliance is used normally. If it is much too high, a dangerous current could flow without melting the fuse. In the UK, common plug fuses are 3 A, 5 A and 13 A.
Worked example 1: a kettle in Manchester
A kettle is rated at 2.8 kW. It runs on 230 V mains. Fuses of 3 A, 5 A and 13 A are available. Which fuse should it use?
Given: P = 2.8 kW = 2800 W, V = 230 V
Equation:
Substitution:
Answer: I = 12 A (2 significant figures). Choose the 13 A fuse.
Worked example 2: a microwave oven
A microwave oven has an input power of 1.2 kW and runs on 230 V. Choose a fuse from 3 A, 5 A and 13 A.
Given: P = 1200 W, V = 230 V
Equation:
Substitution:
Answer: I = 5.2 A (2 significant figures). A 5 A fuse would melt in normal use, so choose the 13 A fuse.
Worked example 3: an iron in Karachi
An electric iron is rated at 1.0 kW on a 220 V supply. Choose a fuse from 3 A, 5 A and 10 A.
Given: P = 1000 W, V = 220 V
Equation:
Substitution:
Answer: I = 4.5 A (2 significant figures). Choose the 5 A fuse.
Common mistakes
- Saying a 50 Hz current changes direction 50 times a second. It completes 50 cycles, so it changes direction 100 times.
- Mixing up neutral and earth. Neutral carries current in normal use. Earth carries current only when there is a fault.
- Saying a switched-off appliance is completely safe. The live wire up to the switch is still at a high p.d.
- Putting the fuse in the neutral wire. Fuses and switches go in the live wire.
- Choosing a fuse equal to or below the normal current. It must be just above it.
Key points
- Mains electricity is AC. UK: 230 V, 50 Hz. Pakistan and India: commonly taught as 220–230 V, 50 Hz. US: 120 V, 60 Hz.
- Live carries the alternating p.d. Neutral completes the circuit at about 0 V. Earth is a safety wire at 0 V.
- Touching the live wire is dangerous, even with the switch off, because current can flow through you to the ground.
- The earth wire and the fuse work together to make a metal case safe if a fault occurs.
- Find the normal current with , then choose the fuse rating just above it.
- Double-insulated appliances need no earth wire.