Skip to content

Internal Energy and Temperature: What Is the Difference, and Where Does Heat Fit In?

Learn what internal energy is made of, why temperature is an average while internal energy is a total, what physicists mean by heat, and how heating either raises the temperature or changes the state. With worked examples using water and ice.

Published · 7 min read

On this page

Internal energy is the total energy stored by the particles of a substance. Each particle has kinetic energy, because it moves, and potential energy, because of the forces between it and its neighbours. Add up both kinds for every particle and you get the internal energy, in joules.

Temperature is different. It tells you how much kinetic energy the particles have on average, not in total. So temperature does not depend on how much of a substance you have, but internal energy does. Heat is different again: it is energy on the move from a hotter object to a colder one.

That is why a full bath at 40 °C has far more internal energy than a cup of tea at 80 °C. Each particle in the tea moves a little faster on average, but the bath has hundreds of times as many particles.

What is internal energy made of?

Two kinds of energy, added up over every particle:

  • Kinetic energy. Particles in a solid jiggle around fixed spots. Liquid and gas particles also wander from place to place. The faster they move, the more kinetic energy they have.
  • Potential energy. Particles attract each other. Pulling them further apart, against that attraction, stores energy, a little like stretching a rubber band. So the potential energy depends on how far apart the particles are. It is much greater in a gas than in the same mass of liquid or solid.
internal energy=total kinetic energy+total potential energy\text{internal energy} = \text{total kinetic energy} + \text{total potential energy}

How is temperature different from internal energy?

Think about money. A class of 30 students carries an average of 200 rupees each, so 6000 rupees in total. A school of 900 students carries a lower average, 150 rupees each, but 135 000 rupees in total. The class is richer per student, yet the school holds far more money.

Temperature is like the average per student. Internal energy is like the total.

TemperatureInternal energyHeat
What it describesHow hot an object is: linked to the average kinetic energy of its particlesThe kinetic energy plus the potential energy of every one of its particlesEnergy passing from a hotter object to a colder one
Unit°C or KJJ
Double the mass at the same temperatureStays the sameDoublesDepends on the process

So what does "heat" mean in physics?

In everyday speech, people say a hot pan "has a lot of heat". Physicists use the word more carefully. Heating is the transfer of energy from a hotter object to a colder one, caused by their difference in temperature. Once the energy arrives, it is simply part of the colder object's internal energy.

The direction of the flow is set by temperature, not by internal energy. Seal the tea inside a thin metal can and float the can in the bath. Energy flows out of the tea and into the bath, even though the bath has far more internal energy. The flow stops when both are at the same temperature. The tea cools to about 40 °C, while the bath warms by less than a tenth of a degree.

Why does a warm bath have more internal energy than hot tea?

Worked example 1: a bath and a cup of tea

A student in Leeds runs a 150 kg bath at 40 °C and makes a 0.25 kg cup of tea at 80 °C. Both started as tap water at 15 °C. How much internal energy did each gain from heating? Use c=4200c = 4200 J/(kg °C).

Equation: ΔE=mcΔθ\Delta E = m c \Delta\theta

Bath: Δθ=40−15=25\Delta\theta = 40 - 15 = 25 °C, so ΔE=150×4200×25=15 750 000\Delta E = 150 \times 4200 \times 25 = 15\,750\,000 J, about 1.6×1071.6 \times 10^7 J

Tea: Δθ=80−15=65\Delta\theta = 80 - 15 = 65 °C, so ΔE=0.25×4200×65=68 250\Delta E = 0.25 \times 4200 \times 65 = 68\,250 J, about 6.8×1046.8 \times 10^4 J

Answer: the bath gained about 230 times as much internal energy as the tea, even though the tea's temperature is much higher.

What happens to internal energy when you heat something?

Heating always raises the internal energy. What you notice depends on where the energy goes:

  1. The temperature rises. The particles speed up, so their kinetic energy grows. Use ΔE=mcΔθ\Delta E = mc\Delta\theta.
  2. The state changes. At the melting point or boiling point, the energy breaks the particles' arrangement or pulls them apart. Their potential energy rises, but their average kinetic energy does not, so the temperature stays steady. Use E=mLE = mL.

For a pure substance, it is one or the other at any moment. Cooling works the other way round. Particles slow down, or they move closer together as a gas condenses, or lock into place as a liquid freezes. Either way, the internal energy falls.

Worked example 2: melting ice in a fish box

A fish seller in Chattogram, Bangladesh, packs fish in 2.0 kg of crushed ice at 0 °C. By midday, all the ice has melted, and the water is still at 0 °C. Find the change in the internal energy of the ice. Use Lf=3.34×105L_f = 3.34 \times 10^5 J/kg.

Given: m = 2.0 kg, Lf=3.34×105L_f = 3.34 \times 10^5 J/kg

Equation: E=mLfE = m L_f

Substitution: E=2.0×3.34×105E = 2.0 \times 3.34 \times 10^5

Answer: E=6.68×105E = 6.68 \times 10^5 J, so the internal energy rose by about 670 kJ.

The temperature did not change, so the average kinetic energy of the particles did not change either. All of the extra internal energy is potential energy. So at 0 °C, each kilogram of water stores 334 kJ more internal energy than a kilogram of ice. This is why ice is so good at keeping food cold. It takes in a large amount of energy from the fish while staying at 0 °C.

Worked example 3: where does the energy of cooling tea go?

A 0.25 kg cup of tea cools from 80 °C to 60 °C in a kitchen in Nairobi. (a) Find the fall in the tea's internal energy. (b) Suppose all of that energy went into the 60 kg of air in the kitchen. By how much would the air's temperature rise? Take c=4200c = 4200 J/(kg °C) for the tea and c=1000c = 1000 J/(kg °C) for air.

(a) ΔE=mcΔθ=0.25×4200×20=21 000\Delta E = m c \Delta\theta = 0.25 \times 4200 \times 20 = 21\,000 J

(b) Δθ=ΔEmc=21 00060×1000=0.35\Delta\theta = \dfrac{\Delta E}{m c} = \dfrac{21\,000}{60 \times 1000} = 0.35 °C

Answer: the tea loses 21 kJ, and the air would warm by only about 0.35 °C. In reality, the walls and furniture take some of the energy too, so the rise is even smaller.

The surroundings gain exactly as much internal energy as the tea loses. But the energy is spread over so many more particles that the temperature hardly changes.

To watch internal energy build up, use the particle model simulation. Press Heat, and the Internal energy card adds total KE and total PE as the box warms. While the solid melts, the Energy against time graph shows total PE climbing while total KE stays almost level. To go further, try the specific heat capacity simulation and the heating curve simulation.

Common mistakes

  • Treating temperature and internal energy as the same thing. Temperature is an average. Internal energy is a total.
  • Assuming the hotter object has more internal energy. A large, cooler object can have far more.
  • Saying an object "contains heat". Say it has internal energy. Heat is energy being transferred.
  • Saying energy flows from more internal energy to less. It flows from a higher temperature to a lower one.
  • Thinking no energy goes in during melting. It does. It goes into the particles' potential energy.
  • Using the specific heat capacity equation during a change of state. The temperature change is zero there, so use E=mLE = mL.

Key points

  • Internal energy is all the kinetic energy plus all the potential energy of a substance's particles.
  • Temperature measures how much kinetic energy the particles have on average, so it does not depend on the amount of substance.
  • Heat is energy transferred from a hotter object to a colder one. Its direction depends on temperature.
  • Heating either raises the temperature (ΔE=mcΔθ\Delta E = mc\Delta\theta) or changes the state at a steady temperature (E=mLE = mL).
  • During a change of state, the internal energy changes while the thermometer reading holds steady.