Skip to content

Half-Life and Radioactive Decay Explained, With Worked Examples

Learn what half-life means, why nobody can predict when one nucleus will decay, how to read half-life from a graph, and how to work out what is left after several half-lives.

Published · 7 min read

On this page

The half-life of a radioactive isotope is the time it takes for half of the unstable nuclei in a sample to decay. It is also the time it takes for the activity of the sample, or the count rate from it, to fall to half of its starting value.

Every isotope has its own half-life. Technetium-99m, used in hospital scans, has a half-life of about 6 hours. Carbon-14 has a half-life of about 5700 years. After one half-life, half of the original nuclei are left. After two half-lives, a quarter are left. After n half-lives, the fraction left is:

fraction remaining=(12)n\text{fraction remaining} = \left(\frac{1}{2}\right)^n

Radioactive decay is random. Nobody can say when one particular nucleus will decay. But a sample contains billions of nuclei, and the overall pattern is very predictable. That is why half-life works.

What does random decay mean?

An unstable nucleus becomes more stable by giving out radiation, such as an alpha particle, a beta particle or a gamma ray. Nothing triggers this. Heating, cooling, squeezing or chemical reactions do not change when it happens. Each nucleus has a fixed chance of decaying in a given time, but you cannot tell which one will go next.

Dice are a good model. Imagine you throw 600 dice and remove every one that shows a six. About 100 are removed. You throw the remaining 500, and about 83 more are removed. You cannot predict which dice will land on six. But you can predict roughly how many will, because the chance is the same for every die.

Nuclei behave in the same way, except a real sample has far more of them. With such huge numbers, the prediction becomes very accurate. You can watch individual nuclei decay at random, while the total follows a smooth curve, in the radioactive decay and half-life simulation.

What are activity and count rate?

The activity of a sample is the number of nuclei that decay each second. It is measured in becquerels (Bq). One becquerel is one decay per second. As the number of unstable nuclei falls, the activity falls in the same proportion. So the activity also halves every half-life.

The count rate is the number of decays a detector records each second or each minute. A common detector is a Geiger–Müller tube. The count rate is always smaller than the activity. The radiation goes out in all directions, and only some of it enters the detector. Alpha particles are also stopped by a few centimetres of air. You can compare how far each type of radiation travels in the alpha, beta and gamma simulation.

How do you find the half-life from a graph?

A graph of activity, count rate or number of unstable nuclei against time is a curve. It falls steeply at first, then more and more slowly. It gets closer and closer to zero.

To find the half-life:

  1. Read the starting value on the y-axis.
  2. Halve it.
  3. Draw a horizontal line from this value across to the curve. Then draw a vertical line down to the time axis. Read the time.
  4. Check your answer by halving again. The time between the two halvings should be the same.

You can start from any point on the curve, not only from time zero. The half-life is the same wherever you measure it.

For example, a student records these corrected count rates:

Time (min)0246810
Count rate (counts per minute)640453320226160113

Half of 640 is 320, which is reached at 4 minutes. Half of 320 is 160, which is reached at 8 minutes. That is another 4 minutes. So the half-life is 4 minutes.

How do you calculate what is left after several half-lives?

First find the number of half-lives:

n=time passedhalf-lifen = \frac{\text{time passed}}{\text{half-life}}

Then halve the starting amount n times, or multiply it by (12)n\left(\frac{1}{2}\right)^n. This works for the number of nuclei, the mass of the isotope, the activity and the corrected count rate.

Half-lives passedFraction remainingPercentage remainingFraction decayed
11/250%1/2
21/425%3/4
31/812.5%7/8
41/166.25%15/16
51/32about 3.1%31/32

Worked example 1: a hospital tracer

A hospital in Mumbai prepares a dose of technetium-99m with an activity of 800 MBq. (1 MBq is one million becquerels.) The half-life is 6.0 hours. Find the activity 24 hours later.

Given: starting activity = 800 MBq, half-life = 6.0 h, time passed = 24 h

Number of half-lives: n = 24 ÷ 6.0 = 4

Equation: activity = starting activity × (12)n\left(\frac{1}{2}\right)^n

Substitution: activity = 800×(12)4=80016800 \times \left(\frac{1}{2}\right)^4 = \dfrac{800}{16}

Answer: activity = 50 MBq

You can also halve four times: 800 → 400 → 200 → 100 → 50 MBq. The short half-life is useful. The scan can be done within a few hours, and then the activity inside the patient falls quickly.

Worked example 2: finding the half-life by calculation

The count rate from a sample of iodine-131 falls from 960 to 120 counts per minute in 24 days. Both values are already corrected for background radiation. Find the half-life. What fraction of the iodine-131 nuclei have decayed?

Given: starting count rate = 960 counts per minute, final count rate = 120 counts per minute, time = 24 days

Halve until you reach 120: 960 → 480 → 240 → 120. That is 3 half-lives.

Equation: half-life = time passed ÷ number of half-lives

Substitution: half-life = 24 ÷ 3

Answer: half-life = 8.0 days. After 3 half-lives, 1/8 of the nuclei remain, so 7/8 have decayed.

What is background radiation, and why do you subtract it?

Background radiation is the low level of radiation around us all the time. It comes from:

  • radon gas, which seeps out of rocks and soil into buildings. In many places this is the largest natural source.
  • rocks and building materials, such as granite
  • cosmic rays from space. There is more on high mountains and in aircraft.
  • food and drink. Our bodies contain small amounts of radioactive potassium-40 and carbon-14.
  • medical uses, such as X-rays and scans. This is the largest artificial source.
  • nuclear power, weapons tests and accidents, which add only a tiny amount for most people.

A detector picks up background radiation as well as the radiation from your source. So you must remove it from every reading:

corrected count rate=measured count rate−background count rate\text{corrected count rate} = \text{measured count rate} - \text{background count rate}

Measure the background with no source nearby, for several minutes, and find the average.

Worked example 3: correcting the count rate

A student in Nairobi measures a background count rate of 30 counts per minute. With a source in place, the readings are 510 counts per minute at the start, 270 after 10 minutes and 150 after 20 minutes. Find the half-life.

Given: background = 30 counts per minute

Equation: corrected count rate = measured − background

Substitution: 510 − 30 = 480, 270 − 30 = 240, 150 − 30 = 120

Answer: the corrected count rate halves every 10 minutes (480 → 240 → 120). So the half-life is 10 minutes.

If you forget to subtract the background, the numbers do not halve. Half of 510 is 255, not 270, so you would get the wrong half-life.

Common mistakes

  • Thinking everything has decayed after two half-lives. A quarter of the nuclei are still left.
  • Forgetting the background count. Subtract it from every reading before you halve.
  • Mixing up fraction remaining and fraction decayed. After 3 half-lives, 1/8 remains and 7/8 has decayed.
  • Thinking heat speeds up decay. Temperature and chemical reactions do not change the half-life.
  • Misreading the time axis. Check whether it is in seconds, hours, days or years.
  • Saying a particular nucleus will decay after one half-life. Decay is random. Half-life only describes large numbers of nuclei.

Key points

  • Half-life is the time for the number of unstable nuclei, or the activity, to halve.
  • Decay is random: you cannot predict when one nucleus will decay, but large samples follow a predictable pattern.
  • Activity is measured in becquerels (Bq). One becquerel is one decay per second.
  • After n half-lives, the fraction remaining is (12)n\left(\frac{1}{2}\right)^n.
  • Read half-life from a graph by halving the y-value and reading across and down. Check by halving again.
  • Corrected count rate = measured count rate − background count rate.