Adding Vectors and Finding the Resultant Force: Head to Tail, Scale Drawings and Components
A step-by-step guide to combining forces: add them along a line, use Pythagoras and tan θ at right angles, make an accurate scale drawing at any angle, split forces into components, and spot equilibrium on a vector diagram.
Published · 7 min read
On this page
- What does "head to tail" mean?
- How do you add forces along a line?
- How do you add two forces at right angles?
- How do you use a scale drawing at any angle?
- How do you split a force into components?
- How do components help you add forces?
- What does a vector diagram look like when forces balance?
- Common mistakes
- Key points
To add vectors, draw them head to tail. Start the second arrow at the tip of the first, and the third at the tip of the second. The resultant is the single arrow from the tail of the first vector to the head of the last one. For forces, that arrow is the resultant force: a single force with the same effect as the whole set.
How you find its size depends on the angles:
- Along one line: add the forces, using + and − for the two directions.
- At right angles: Pythagoras gives the size, and gives the direction.
- At any other angle: make an accurate scale drawing, or split each force into parts at right angles and add those.
This guide works through each method, then shows what a vector diagram looks like when the forces balance.
What does "head to tail" mean?
Each vector is an arrow, drawn to scale and pointing the right way. To add two of them, slide the second arrow, without turning it, until its tail touches the head of the first. The order does not matter. Adding A then B gives the same resultant as B then A.
Some books show a second method, the parallelogram rule. Draw both arrows from the same point, complete the parallelogram, and the diagonal from that point is the resultant. It always gives the same answer as head to tail.
How do you add forces along a line?
Choose one direction as positive. Forces the other way are negative. Then add.
A rowing crew on the Thames in London pulls their boat forwards with 520 N. The water drags back with 410 N, and the wind in their faces holds them back with 60 N. Taking forwards as positive, the resultant is 520 − 410 − 60 = 50 N forwards, so the boat speeds up.
How do you add two forces at right angles?
Drawn head to tail, the two arrows form a right-angled triangle, with the resultant as the hypotenuse.
Here θ is the angle between the resultant and .
Worked example 1: pulling out a tree stump
A farmer in Faisalabad clears a field. A tractor pulls a tree stump due east with 7.0 kN, while a winch pulls it due north with 2.4 kN. Find the resultant of the two pulls.
Given: = 7.0 kN east, = 2.4 kN north, at 90° to each other
Size: kN
Direction: , so (2 significant figures)
Answer: 7.4 kN at 19° north of east
The winch pulls at right angles to the tractor, so it mainly turns the resultant rather than making it longer. That is why 7.4 kN is only a little more than 7.0 kN.
How do you use a scale drawing at any angle?
For forces at other angles, a careful drawing is the simplest method.
- Choose a scale that makes the drawing large, such as 1 cm to 10 N.
- Draw the first force to scale with a ruler and protractor.
- From its head, draw the second force at its own angle.
- Join the tail of the first arrow to the head of the second. This is the resultant.
- Measure its length and convert with your scale. Measure its angle with a protractor.
Worked example 2: two ropes on a sledge
Two friends in Rovaniemi, Finland, pull a sledge across flat snow. One rope pulls with 80 N due east. The other pulls with 70 N in a direction 60° north of east. Find the resultant by scale drawing.
Scale: 1 cm to 10 N, so the arrows are 8.0 cm and 7.0 cm long.
Drawing: draw 8.0 cm due east. From its head, draw 7.0 cm at 60° above the east line.
Measuring: the closing line is 13.0 cm long, at about 28° to the east line.
Answer: the resultant is 130 N at about 28° north of east.
Check it with the sense test: 130 N lies between 80 − 70 = 10 N and 80 + 70 = 150 N.
How do you split a force into components?
Resolving undoes addition. You replace one force with two forces at right angles, usually horizontal and vertical, which together have exactly the same effect. For a force F at an angle θ to the horizontal:
The side adjacent to θ gets cos θ, and the side opposite θ gets sin θ.
How do components help you add forces?
Components turn a hard problem into easy ones. Resolve every force, add all the horizontal parts, add all the vertical parts, then rebuild the resultant with Pythagoras and . This works for any number of forces at any angles.
Worked example 3: a boat pulled along a channel
At a harbour in Gwadar, Pakistan, workers pull a fishing boat along a narrow channel with two ropes, one from each bank. Each rope pulls with 400 N at 30° to the line of the channel, one to the left and one to the right. Find the resultant.
Along the channel (each rope): N
Across the channel (each rope): N
Adding along: 346.4 + 346.4 = 692.8 N
Adding across: the two 200 N parts point in opposite directions, so 200 − 200 = 0
Answer: the resultant is about 690 N (2 significant figures) along the channel, with no sideways part.
The sideways pulls cancel, so the boat moves straight along the channel. The cost is that each rope pulls harder than its useful share. Each rope pulls with 400 N, yet together they give a resultant of only about 690 N, not 800 N.
What does a vector diagram look like when forces balance?
If the forces on an object are balanced, the resultant is zero. Drawn head to tail, the arrows finish exactly where they started. Three balanced forces make a closed triangle. More forces make a closed polygon.
For example, a café sign in Lisbon weighs 30 N and hangs from two wires, each at 30° above the horizontal. The sign is still, so the forces balance. Each wire's vertical component must hold up half the weight: N, so the tension is N. Each wire pulls as hard as the whole weight of the sign. Their horizontal parts cancel, and the weight arrow plus the two tension arrows close into a triangle.
You can build diagrams like these in the free-body diagram simulation. Pick the situation called Two forces at right angles, then change View to Vector diagram: a 3 N arrow and a 4 N arrow line up head to tail, closed by a 5 N resultant. Three ropes in balance shows three equal pulls closing a triangle. You can also explore these ideas in the adding and resolving vectors simulation.
Common mistakes
- Adding the sizes of forces at an angle. 7.0 kN and 2.4 kN at right angles give 7.4 kN, not 9.4 kN.
- Joining the wrong ends. The resultant runs from the tail of the first arrow to the head of the last.
- Using a tiny scale. Small drawings give large errors. Fill most of the page.
- Swapping sin and cos. Cos goes with the side beside the angle.
- Measuring the angle from the wrong line. State it, for example "28° north of east".
- Forgetting the direction. A resultant force needs a size and a direction.
Key points
- Add vectors head to tail. The resultant joins the start of the first to the end of the last.
- Along a line, use + and − signs. At right angles, use and .
- At any angle, use an accurate scale drawing or add components.
- A force F at θ to the horizontal has a horizontal component and a vertical component .
- The resultant of two forces lies between their difference and their sum.
- Balanced forces drawn head to tail make a closed shape, because the resultant is zero.