Skip to content

Punjab Board Class 9 Physics · Kinematics

Speed–time graphs

Section 2.9Section 2.10Section 2.11

A speed–time graph plots speed v against time t. Its gradient equals the acceleration and the area under it equals the distance covered. A horizontal line means constant speed; a straight sloping line means uniform acceleration.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

What a speed–time graph shows

A speed–time graph shows how the speed vv of a body changes with time tt. As with every motion graph in Class 9, time goes along the x-axis and the other quantity goes up the y-axis. This one graph answers two different questions: its gradient gives the acceleration, and the area underneath it gives the distance covered.

Reading the shape

Shape of the graphMeaning
Line lying along the time axis (speed zero throughout)The body is at rest
Horizontal line above the time axisConstant speed, so zero acceleration
Straight line sloping upwardsUniform acceleration
Straight line sloping downwardsUniform deceleration (negative acceleration)
Curved lineNon-uniform (variable) acceleration

Gradient gives acceleration

Take two points on a straight speed–time line. At time t1t_1 the speed is v1v_1, and at time t2t_2 it is v2v_2:

gradient=v2−v1t2−t1=ΔvΔt=a\text{gradient} = \frac{v_2 - v_1}{t_2 - t_1} = \frac{\Delta v}{\Delta t} = a

The change in speed divided by the time taken is the acceleration, so the gradient of a speed–time graph equals the acceleration. An upward slope gives a positive value, a downward slope gives a negative value (deceleration), and a horizontal line has zero gradient, so zero acceleration.

Area gives distance

The area enclosed by the line and the time axis is numerically equal to the distance covered. If you are asked to prove this, work through two simple cases.

Constant speed. The graph is a horizontal line at height vv for a time tt. The shaded shape is a rectangle, and its area is v×tv \times t. From S=vtS = vt, that is exactly the distance covered.

Uniform acceleration from rest. The speed rises steadily from 0 to vv in time tt, so the shape is a right-angled triangle. Because the speed rises evenly, the average speed is halfway between the two ends:

vav=0+v2=v2,S=vav×t=12vtv_{av} = \frac{0 + v}{2} = \frac{v}{2}, \qquad S = v_{av} \times t = \tfrac{1}{2}vt

The triangle has base tt and height vv, so its area is 12×t×v\tfrac{1}{2} \times t \times v, the same as the distance. For a more complicated graph, split the area into rectangles and triangles, find each one, and add them up.

Worked numerical

A Lahore metro train runs between two stations. It speeds up uniformly from rest to 20 m s−120\ \text{m s}^{-1} in 25 s, keeps that speed for 40 s, then slows uniformly to rest in 20 s.

(a) Acceleration in the first 25 s: a=20−025=0.8 m s−2a = \dfrac{20 - 0}{25} = 0.8\ \text{m s}^{-2}

(b) Acceleration in the last 20 s: a=0−2020=−1 m s−2a = \dfrac{0 - 20}{20} = -1\ \text{m s}^{-2}, a deceleration of 1 m s−21\ \text{m s}^{-2}

(c) Distance between the stations, from the area under the graph:

S=12(25)(20)+(40)(20)+12(20)(20)=250+800+200=1250 mS = \tfrac{1}{2}(25)(20) + (40)(20) + \tfrac{1}{2}(20)(20) = 250 + 800 + 200 = 1250\ \text{m}

(d) Average speed: total time =25+40+20=85 s= 25 + 40 + 20 = 85\ \text{s}, so vav=125085≈14.7 m s−1v_{av} = \dfrac{1250}{85} \approx 14.7\ \text{m s}^{-1}

Check it in the simulation

The simulation above labels this graph velocity–time. The car only moves forwards along a straight road, so the size of its velocity is its speed, and the graph is the same as your speed–time graph.

Choose Journey. The car accelerates at 3 m s−23\ \text{m s}^{-2} for 4 s, cruises for 4 s, then decelerates at 3 m s−23\ \text{m s}^{-2} for 4 s. Before pressing play, sketch the graph and use areas to predict the total distance. (You should get 24 + 48 + 24 = 96 m.) Then check that Area under v–t graph is switched on (it is on at the start) and compare the shaded total with the SS readout. Drag across the graph to draw a tangent: in each section its gradient matches the acceleration.

Equations

  • Acceleration

    Learn this

    a=ΔvΔt

    acceleration = change in velocity ÷ time taken

    Open calculator →

Common mistakes

  • Reading a horizontal line on a speed–time graph as 'at rest'. It means constant speed; only a line along the time axis means the body is at rest.
  • Finding the area of a triangle as base × height and forgetting the ½.
  • Calling the gradient of a speed–time graph the speed. The gradient is the acceleration; the speed is read straight off the y-axis.
  • Dropping the minus sign when the line slopes downwards. A falling line has a negative gradient, which is a deceleration.
  • Multiplying the final speed by the total time to get the distance when the speed was changing, instead of finding the area under the line.
  • Counting area above the line, or the whole grid, instead of only the area enclosed by the line and the time axis.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Speed–time graphs are used to study the motion of vehicles.

    1. (a)What does the gradient of a speed–time graph represent?

      1 mark
      Show the answer

      Answer: The acceleration of the body.

      Marking points

      • Acceleration
    2. (b)What does the area under a speed–time graph represent?

      1 mark
      Show the answer

      Answer: The distance covered by the body.

      Marking points

      • Distance covered
    3. (c)Describe the speed–time graph of a body moving with constant speed, and state its acceleration.

      2 marks
      Show the answer

      Answer: A horizontal straight line above the time axis (parallel to it). The gradient is zero, so the acceleration is zero.

      Marking points

      • Horizontal straight line parallel to the time axis
      • Acceleration is zero
  2. 2.A car on the M-2 moving at 30 m s⁻¹ brakes uniformly and comes to rest in 12 s.

    1. (a)Describe the speed–time graph for the braking.

      1 mark
      Show the answer

      Answer: A straight line sloping downwards from 30 m s⁻¹ at t = 0 to zero at t = 12 s.

      Marking points

      • Straight line sloping down from 30 m s⁻¹ to 0 at 12 s
    2. (b)Use the gradient to find the acceleration of the car.

      2 marks
      Show the answer

      Answer: Gradient = (0 − 30) ÷ 12 = −2.5 m s⁻², a deceleration of 2.5 m s⁻²

      Marking points

      • Gradient = (0 − 30) ÷ 12
      • −2.5 m s⁻² (or deceleration of 2.5 m s⁻²)
    3. (c)Use the area under the graph to find the braking distance.

      2 marks
      Show the answer

      Answer: Area of triangle = ½ × 12 × 30 = 180 m

      Marking points

      • Area = ½ × 12 × 30
      • 180 m
  3. 3.A body starts from rest and its speed increases uniformly to v in time t.

    1. (a)Prove that the area under its speed–time graph is numerically equal to the distance it covers.

      4 marks
      Show the answer

      Answer: The graph is a straight line from the origin, so the area under it is a triangle with base t and height v, giving area = ½vt. Because the speed rises uniformly, the average speed is (0 + v)/2 = v/2. Distance = average speed × time = ½vt, which equals the area.

      Marking points

      • Area under the line is a triangle of base t and height v
      • Area = ½ × v × t
      • Average speed = (0 + v)/2 = v/2 for uniform acceleration
      • Distance = average speed × time = ½vt, the same as the area
  4. 4.A motorbike moving at 4 m s⁻¹ accelerates uniformly to 16 m s⁻¹ in 6 s.

    1. (a)Find the acceleration of the motorbike from the gradient of its speed–time graph.

      2 marks
      Show the answer

      Answer: a = (16 − 4) ÷ 6 = 2 m s⁻²

      Marking points

      • (16 − 4) ÷ 6
      • 2 m s⁻²
    2. (b)Use the area under the speed–time graph to find the distance covered in the 6 s.

      3 marks
      Show the answer

      Answer: Rectangle: 4 × 6 = 24 m. Triangle: ½ × 6 × (16 − 4) = 36 m. Total distance = 24 + 36 = 60 m.

      Marking points

      • Rectangle area = 4 × 6 = 24 m
      • Triangle area = ½ × 6 × 12 = 36 m
      • Total = 60 m

Quick check

6 questions

  1. 1.A student works out the slope of a straight speed–time line. The value found is the body's:
  2. 2.A speed–time graph is a horizontal line at 12 m s⁻¹ from 0 s to 5 s. The distance covered is:
  3. 3.A speed–time graph is a horizontal line above the time axis. The acceleration of the body is:
  4. 4.A speed–time line rises uniformly from 0 to 15 m s⁻¹ in 5 s. The acceleration is:
  5. 5.A body speeds up uniformly from rest to 15 m s⁻¹ in 5 s. The distance it covers in this time is:
  6. 6.A straight speed–time line slopes downwards until it meets the time axis. The body is: