Skip to content

GCSE Physics — AQA · Forces and motion

Velocity–time graphs

4.5.6.1.5

Find acceleration from the slope of a velocity–time graph and describe the motion from its shape. On the Higher tier, work out the distance travelled from the area under the line, counting squares for curves.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

Velocity–time graphs in the AQA course

Velocity–time graphs belong to spec point 4.5.6.1.5. How much of it you need depends on your tier:

  • Both tiers: plot a velocity–time graph from data, describe the motion it shows, and get an acceleration from its gradient.
  • Higher tier only: find the distance travelled (or displacement) from the area under the line, counting squares if the line is curved.
  • GCSE Physics only (not Combined Science): the graph for a falling object that reaches terminal velocity.

The equation behind the gradient is a=Δvta = \dfrac{\Delta v}{t}, which you must remember.

Reading the shape

On these graphs, the height of the line is the velocity. Read the slope to see how the velocity is changing.

What the line doesMotion
Runs along the time axis at zeroAt rest
Flat, above the axisSteady velocity, no acceleration
Straight, sloping upUniform acceleration
Straight, sloping down towards the axisUniform deceleration
Rising, but curving so it gets flatterStill speeding up, but the acceleration is getting smaller

The steeper the slope, the bigger the acceleration.

Worked example: three stages of a bus ride

A double-decker in Dublin pulls away from a stop. Its velocity–time graph has three straight parts:

  • 0 to 8.0 s: velocity rises from 0 to 12 m/s.
  • 8.0 s to 28 s: velocity stays at 12 m/s.
  • 28 s to 34 s: velocity falls from 12 m/s to 0.

(a) Acceleration in the first part

Given: Δv=12−0=12 m/s\Delta v = 12 - 0 = 12\ \text{m/s}, t=8.0 st = 8.0\ \text{s}

Equation: a=Δvta = \dfrac{\Delta v}{t}, which is the gradient of the line

Substitution: a=128.0a = \dfrac{12}{8.0}

Answer: a=1.5 m/s2a = 1.5\ \text{m/s}^2

(b) Acceleration in the last part

Substitution: a=0−126.0a = \dfrac{0 - 12}{6.0}

Answer: a=−2.0 m/s2a = -2.0\ \text{m/s}^2, a deceleration of 2.0 m/s². This line is steeper than the first one, so the bus slows down more sharply than it sped up.

(c) Higher tier: distance travelled

Split the area under the line into simple shapes.

  • First triangle: 12×8.0×12=48 m\tfrac12 \times 8.0 \times 12 = 48\ \text{m}
  • Rectangle: 20×12=240 m20 \times 12 = 240\ \text{m}
  • Last triangle: 12×6.0×12=36 m\tfrac12 \times 6.0 \times 12 = 36\ \text{m}

Answer: total distance =48+240+36=324 m= 48 + 240 + 36 = 324\ \text{m}

Higher tier: why the area gives distance

For a steady velocity, distance equals velocity multiplied by time. On the graph, that is the height of a rectangle times its width, which is its area. The same idea holds for any shape of line, because every thin strip of area is a small velocity multiplied by a short time.

Higher tier: counting squares under a curve

When the line is curved, you cannot use triangles and rectangles. Count squares instead.

  1. Work out the distance one grid square stands for. If a square is 2 s wide and 5 m/s tall, it represents 2×5=10 m2 \times 5 = 10\ \text{m}.
  2. Count every whole square under the line.
  3. Count part-squares that are about half or more as whole ones, and ignore the smaller bits.
  4. Multiply your total number of squares by the distance per square.

Using the simulation

In the simulation above, choose Journey. The car speeds up at 3 m/s² for 4 s, cruises at 12 m/s, then brakes to a stop at 12 s. Drag along the velocity–time graph and read the gradient at different times: 3 m/s², then 0, then −3 m/s². The area under the velocity–time graph is shaded (this is switched on at the start). When the run ends, the shaded area and the distance readout should both show 96 m. Check this yourself with two triangles and a rectangle.

Equations

Common mistakes

  • Describing a flat line above the axis as 'stationary'; on a velocity–time graph it means constant velocity.
  • Reading the acceleration from the height of the line instead of its gradient.
  • Forgetting the ½ when finding the area of a triangle under the line.
  • Giving the area under a velocity–time graph in m/s or m/s² instead of metres.
  • Ignoring the negative sign (or the word deceleration) when the line slopes down towards the axis.
  • Using the wrong value for one grid square when counting squares, for example forgetting to multiply its width by its height.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A lift in a Singapore office block rises from rest. It speeds up uniformly to 3.0 m/s in 2.0 s, travels at 3.0 m/s for 8.0 s, then slows uniformly to rest in 2.0 s.

    1. (a)Calculate the acceleration of the lift in the first 2.0 s.

      2 marks
      Show the answer

      Answer: a = Δv ÷ t = 3.0 ÷ 2.0 = 1.5 m/s²

      Marking points

      • a = 3.0 ÷ 2.0
      • a = 1.5 m/s²
    2. (b)Describe the motion of the lift between 2.0 s and 10 s.

      1 mark
      Show the answer

      Answer: It moves at a constant velocity of 3.0 m/s.

      Marking points

      • Constant velocity (of 3.0 m/s) / zero acceleration.
    3. (c)Higher tier. Sketch the velocity–time graph for the whole journey. Use the area under it to calculate how far the lift rises.

      3 marks
      Show the answer

      Answer: Areas: ½ × 2.0 × 3.0 = 3.0 m; 8.0 × 3.0 = 24 m; ½ × 2.0 × 3.0 = 3.0 m. Total = 30 m

      Marking points

      • Area method used (triangle and rectangle areas).
      • Correct parts: 3.0 m, 24 m and 3.0 m.
      • Total = 30 m
  2. 2.The velocity–time graph for a sprinter is a curve. It starts steep and becomes less steep as the race goes on.

    1. (a)What does the gradient of a velocity–time graph represent?

      1 mark
      Show the answer

      Answer: Acceleration.

      Marking points

      • Acceleration.
    2. (b)Explain what the shape of the graph shows about the sprinter's acceleration.

      2 marks
      Show the answer

      Answer: The gradient decreases as the line becomes less steep. The gradient is the acceleration, so the acceleration is decreasing (although the sprinter is still speeding up).

      Marking points

      • The gradient is getting smaller.
      • So the acceleration is decreasing.
    3. (c)Higher tier. Describe how the distance run in the first 4 s could be found from the graph.

      3 marks
      Show the answer

      Answer: Count the squares under the curve between 0 and 4 s, counting part-squares of about half or more. Work out the distance one square represents (width × height). Multiply the number of squares by this distance.

      Marking points

      • Count the squares under the curve from 0 to 4 s.
      • Find the distance represented by one square (its time width × velocity height).
      • Multiply the number of squares by the distance per square.
  3. 3.A train is travelling at 24 m/s. The driver brakes and the train's velocity falls uniformly to zero in 16 s.

    1. (a)Calculate the deceleration of the train.

      2 marks
      Show the answer

      Answer: a = (0 − 24) ÷ 16 = −1.5 m/s², so the deceleration is 1.5 m/s²

      Marking points

      • a = 24 ÷ 16 (or (0 − 24) ÷ 16)
      • Deceleration = 1.5 m/s² (accept a = −1.5 m/s²)
    2. (b)Higher tier. Sketch the velocity–time graph for the braking. Use the area under it to calculate the distance travelled while braking.

      2 marks
      Show the answer

      Answer: Area of triangle = ½ × 16 × 24 = 192 m

      Marking points

      • ½ × 16 × 24
      • 192 m (accept 190 m)

Quick check

6 questions

  1. 1.What does the gradient of a velocity–time graph give?
  2. 2.A velocity–time graph shows a horizontal line at 8 m/s. What is the object doing?
  3. 3.Higher tier: what does the area under a velocity–time graph represent?
  4. 4.A velocity–time line rises steadily from 0 to 15 m/s in 5.0 s. What is the acceleration?
  5. 5.Higher tier: a scooter moves at a steady 14 m/s for 5.0 s. What distance does the area under its velocity–time graph show?
  6. 6.A velocity–time line slopes down in a straight line until it reaches the time axis. What does this show?