Skip to content

Punjab Board Class 9 Physics · Kinematics

Equations of motion

Section 2.12

For uniform acceleration in a straight line, vf = vi + at, S = vi t + ½at² and 2aS = vf² − vi² link initial velocity, final velocity, acceleration, time and distance. All three must be learnt and used with the correct signs.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

The three equations of motion

When a body moves in a straight line with uniform acceleration, five quantities describe its motion: the initial velocity viv_i, the final velocity vfv_f, the acceleration aa, the time taken tt and the distance covered SS. Your textbook links them with three equations, numbered in this order:

vf=vi+at(first equation)v_f = v_i + at \qquad \text{(first equation)} S=vit+12at2(second equation)S = v_i t + \tfrac{1}{2}at^2 \qquad \text{(second equation)} 2aS=vf2−vi2(third equation)2aS = v_f^2 - v_i^2 \qquad \text{(third equation)}

Worked solutions in your textbook refer to them by number, for example "from the third equation of motion", so learn the numbering as well as the equations. There is no formula sheet in the Punjab exam, so all three must be recalled. The textbook states these equations without deriving them, and its numerical problems ask you to apply them.

The first equation is the definition of acceleration rearranged. Start from a=vf−vita = \dfrac{v_f - v_i}{t}, multiply both sides by tt and you reach vf=vi+atv_f = v_i + at.

Rules to follow before you substitute

  • The motion must be along a straight line.
  • The acceleration must be uniform. If it changes, these equations do not apply.
  • Only the sizes of the vector quantities go into the equations, with a sign to show direction.
  • Take the direction of viv_i as positive. Any quantity pointing the opposite way is negative, so a body that is slowing down has a negative aa.
  • Change every value into SI units first: km h−1\text{km h}^{-1} into m s−1\text{m s}^{-1}, minutes into seconds, km into m.

Watch for hidden data in the wording. "Starts from rest" gives vi=0v_i = 0. "Comes to rest" or "stops" gives vf=0v_f = 0. "Moves with uniform velocity" gives a=0a = 0.

Choosing the right equation

Each equation contains four of the five quantities and leaves one out.

EquationQuantities it containsQuantity it leaves out
Firstvf, vi, a, tS
SecondS, vi, a, tvf
Thirdvf, vi, a, St

List the data with symbols, mark the unknown with a question mark, then find the one quantity that is neither given nor asked for. Pick the equation that leaves that quantity out.

Worked numerical 1

A car on the M-2 is moving at 10 m s−110\ \text{m s}^{-1}. To overtake a truck it accelerates uniformly at 1.5 m s−21.5\ \text{m s}^{-2} for 8 s. Find the distance it covers and its final velocity.

Data: vi=10 m s−1v_i = 10\ \text{m s}^{-1}, a=1.5 m s−2a = 1.5\ \text{m s}^{-2}, t=8 st = 8\ \text{s}, S=?S = ? The final velocity is not needed for SS, so use the second equation.

S=vit+12at2=(10)(8)+12(1.5)(8)2=80+48=128 mS = v_i t + \tfrac{1}{2}at^2 = (10)(8) + \tfrac{1}{2}(1.5)(8)^2 = 80 + 48 = 128\ \text{m}

For the final velocity use the first equation: vf=10+(1.5)(8)=22 m s−1v_f = 10 + (1.5)(8) = 22\ \text{m s}^{-1}.

Check with the third equation: 2aS=2(1.5)(128)=3842aS = 2(1.5)(128) = 384 and vf2−vi2=484−100=384v_f^2 - v_i^2 = 484 - 100 = 384. Both sides agree.

Worked numerical 2: slowing down

A train moving at 108 km h−1108\ \text{km h}^{-1} brakes uniformly and stops after covering 450 m. Find its acceleration and the time it takes to stop.

Data: vi=108×518=30 m s−1v_i = 108 \times \tfrac{5}{18} = 30\ \text{m s}^{-1}, vf=0v_f = 0, S=450 mS = 450\ \text{m}, a=?a = ? Time is not given, so use the third equation.

a=vf2−vi22S=0−3022×450=−900900=−1 m s−2a = \frac{v_f^2 - v_i^2}{2S} = \frac{0 - 30^2}{2 \times 450} = \frac{-900}{900} = -1\ \text{m s}^{-2}

The minus sign shows a deceleration of 1 m s−21\ \text{m s}^{-2}. Now the first equation gives the time: 0=30+(−1)t0 = 30 + (-1)t, so t=30 st = 30\ \text{s}.

Test the equations in the simulation

In the simulation above, choose Custom and set vi=5 m s−1v_i = 5\ \text{m s}^{-1} and a=2 m s−2a = 2\ \text{m s}^{-2}. Before you press play, predict the final velocity and distance at t=6t = 6 s. The first equation gives vf=17 m s−1v_f = 17\ \text{m s}^{-1}, and the second gives S=30+36=66S = 30 + 36 = 66 m. Run the car, pause as the time readout reaches 6 s, and compare. The velocity readout at that moment is your vfv_f.

Equations

  • Final velocity (v = u + at)

    Learn this

    vf=vi+at

    final velocity = initial velocity + acceleration × time

    Open calculator →
  • Distance under uniform acceleration (s = ut + ½at²)

    Learn this

    S=vit+12at2

    distance = initial velocity × time + 0.5 × acceleration × (time)²

    Open calculator →
  • Uniform acceleration (v² − u² = 2as)

    Learn this

    vf=vi2+2aS

    (final velocity)² − (initial velocity)² = 2 × acceleration × distance

    Open calculator →

Common mistakes

  • Using the equations of motion when the acceleration is not uniform.
  • Forgetting the ½ in S = vi t + ½at², or squaring the whole of at instead of only t.
  • Taking a as positive for a body that is slowing down. An acceleration opposite to vi must be negative.
  • Putting km h⁻¹ or minutes straight into an equation without first converting to m s⁻¹ and seconds.
  • Missing hidden data: 'starts from rest' means vi = 0 and 'comes to rest' means vf = 0.
  • Choosing an equation that has two unknowns in it. Pick the one that leaves out the quantity that is neither given nor asked for.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Three equations of motion are used to solve problems on bodies moving in a straight line.

    1. (a)Write down the three equations of motion.

      3 marks
      Show the answer

      Answer: vf = vi + at; S = vi t + ½at²; 2aS = vf² − vi²

      Marking points

      • vf = vi + at
      • S = vi t + ½at²
      • 2aS = vf² − vi²
    2. (b)State two conditions that must be met before these equations can be used.

      2 marks
      Show the answer

      Answer: The body must move along a straight line, and its acceleration must be uniform.

      Marking points

      • Motion is along a straight line
      • Acceleration is uniform (constant)
  2. 2.A rickshaw starts from rest and accelerates uniformly at 1.2 m s⁻² for 10 s.

    1. (a)Calculate the final velocity of the rickshaw.

      2 marks
      Show the answer

      Answer: vf = vi + at = 0 + 1.2 × 10 = 12 m s⁻¹

      Marking points

      • Uses vf = vi + at with vi = 0
      • 12 m s⁻¹
    2. (b)Calculate the distance it covers in the 10 s.

      2 marks
      Show the answer

      Answer: S = vi t + ½at² = 0 + ½ × 1.2 × 10² = 60 m

      Marking points

      • Uses S = vi t + ½at²
      • 60 m
  3. 3.A bus moving at 20 m s⁻¹ on the Lahore Ring Road applies its brakes and decelerates uniformly at 2.5 m s⁻².

    1. (a)Calculate the distance the bus covers before it stops.

      3 marks
      Show the answer

      Answer: vi = 20 m s⁻¹, vf = 0, a = −2.5 m s⁻². 2aS = vf² − vi² gives S = (0 − 400) ÷ (2 × −2.5) = 80 m

      Marking points

      • Takes a = −2.5 m s⁻² and vf = 0
      • Uses 2aS = vf² − vi²
      • 80 m
    2. (b)Calculate the time the bus takes to stop.

      2 marks
      Show the answer

      Answer: vf = vi + at gives 0 = 20 + (−2.5)t, so t = 8 s

      Marking points

      • Uses vf = vi + at with a negative
      • 8 s
  4. 4.A car starts from rest and, with uniform acceleration, covers 100 m in 10 s.

    1. (a)Calculate the acceleration of the car.

      3 marks
      Show the answer

      Answer: With vi = 0, S = ½at², so a = 2S ÷ t² = (2 × 100) ÷ 10² = 2 m s⁻²

      Marking points

      • With vi = 0, S = ½at²
      • a = (2 × 100) ÷ 10²
      • 2 m s⁻²
    2. (b)Calculate the velocity of the car at the end of the 10 s.

      2 marks
      Show the answer

      Answer: vf = vi + at = 0 + 2 × 10 = 20 m s⁻¹

      Marking points

      • Uses vf = vi + at
      • 20 m s⁻¹

Quick check

6 questions

  1. 1.Which equation of motion does not contain time?
  2. 2.A body starts from rest with a uniform acceleration of 4 m s⁻². The distance it covers in 5 s is:
  3. 3.A car moving at 8 m s⁻¹ accelerates uniformly at 2 m s⁻² for 3 s. Its final velocity is:
  4. 4.The equations of motion can be applied only when the acceleration of a body is:
  5. 5.A stone is dropped from rest and falls freely. Taking g = 10 m s⁻², its speed after 2.5 s is:
  6. 6.A car moving at 20 m s⁻¹ stops in a distance of 40 m with uniform deceleration. Its acceleration is: