What this topic covers
A cork and an iron weight of the same size feel very different. Density puts a number on that difference and predicts floating.
Density and its equation (Core)
Density is mass per unit volume:
where (the Greek letter rho) stands for density, for mass and for volume. Use grams with cm³ to get g/cm³, or kilograms with m³ to get kg/m³. One cubic metre is cm³ but one kilogram is only g, so a value in g/cm³ becomes kg/m³ when multiplied by 1000. Fresh water is about 1.0 g/cm³, or 1000 kg/m³.
The material, not the size of the sample, sets the density: a steel bar cut in two gives two pieces of the same density.
Measuring density (Core)
A top-pan balance gives the mass. How you find the volume depends on the sample.
- Regular solid: use a ruler on each edge and calculate the volume ( for a cuboid, for a cylinder).
- Irregular solid that sinks: read a part-filled measuring cylinder, then hang the object on a thread and lower it until the water covers it. Read again: the rise is its volume. Too wide for the cylinder? Fill a displacement can until water runs from its spout and wait for the dripping to stop. Then lower the object in and catch the overflow in a measuring cylinder. Its volume equals the object's.
- Liquid: weigh a measuring cylinder empty, then with the liquid in it. Subtracting gives the liquid's mass, and the cylinder's scale gives its volume.
Read every cylinder with your eye level with the liquid surface, at the lowest point of the meniscus.
Floating and sinking (Core)
Compare densities. An object that is less dense than a liquid floats in it, and one that is denser sinks. Ice (about 920 kg/m³) floats on fresh water; a steel nail (about 7900 kg/m³) sinks.
Two liquids that do not mix (Supplement)
Oil and water stay separate in a jar, forming two layers. The less dense liquid always ends up on top, so cooking oil (about 920 kg/m³) floats on water. Liquids that do mix, such as ethanol and water, simply blend, so no layers form.
Worked example 1: a river stone (Core)
A student in Kathmandu weighs a stone: 135 g. A measuring cylinder reads 38 cm³ before the stone goes in and 88 cm³ after. Find its density. Does it float in water?
Answer: 2700 kg/m³, more than water's 1000 kg/m³, so it sinks.
Worked example 2: lamp fuel (Core, then Supplement)
A measuring cylinder reads 96.4 g on a balance when empty and 160.4 g with 80 cm³ of paraffin in it.
(Supplement) Paraffin does not mix with water and is less dense, so it forms the upper layer.
Simulation tasks
In the simulation above, the Regular experiment opens with a 2.0 cm Aluminium cube; its Volume card already reads 8.00 cm³.
- (Core) Press Weigh it: 21.6 g, so the Density is 2.70 g/cm³ (2700 kg/m³).
- (Core) Switch to Irregular and press Lower in. The 20.8 g Pebble lifts the water from 50 cm³ to 58 cm³, so its volume is 8 cm³ and its density 2.60 g/cm³. Next pick the Large stone, too wide for the cylinder: choose Displacement can, then Lower in. Water collected reaches 45 cm³.
- (Core) Switch to Liquid and press Pour. The balance climbs from 104.3 g to 150.3 g as 50 cm³ of cooking oil goes in: 46.0 ÷ 50 = 0.920 g/cm³.
- (Core) Switch to Float. Predict, then press Drop in for the Pine block (0.500 g/cm³) in Water. Then test the Polythene block (0.950 g/cm³) in water and in Cooking oil.
- (Supplement) Measure Water in the Liquid experiment too. In one beaker, which liquid would form the top layer?