Skip to content

Cambridge IGCSE Physics (0625) · Magnetism and electromagnetic effects

Magnetic fields

4.1

Core: a magnetic field is the space round a magnet where a magnetic pole is pushed or pulled; outside a bar magnet the lines run from N to S; the field points the way an N pole would be pushed; map it with a plotting compass or iron filings. Supplement: closer lines mean a stronger field.

Loading simulation…

Symbols match your course. Open the full magnetic field of a bar magnet simulation for more presets and teacher tools.

What this topic covers

Scatter iron filings on paper over a bar magnet and curved lines appear, as if drawn by an invisible hand. Syllabus 4.1 explains them.

What a magnetic field is (Core)

Every magnet is surrounded by a magnetic field. Anywhere inside it, another magnetic pole would be pushed or pulled. We picture the field with magnetic field lines.

Which way a field points (Core)

The field at any spot points the way an N pole put there would be pushed. An N pole is repelled by the magnet's N pole and attracted to its S pole, so outside the magnet field lines run from N to S.

A plotting compass needle is a tiny magnet, so its N end swings round to point along the field.

Drawing the field of a bar magnet (Core)

A good drawing has:

  • lines that leave the N pole and curve round outside the magnet into the S pole;
  • an arrow on each line, pointing from N towards S;
  • smooth lines that never cross or touch, since a field can point only one way at each place;
  • a symmetrical pattern, with several lines on each side, crowded close to each pole.

Plotting with a compass (Core)

  1. Draw round the magnet on paper and mark its N end.
  2. Set a plotting compass beside the N pole. Mark a dot just beyond the N end of the needle.
  3. Slide the compass until the S end of the needle rests on that dot, then mark a new dot beyond the N end.
  4. Continue until the dots reach the S pole. Join them with a smooth curve, add arrows the way the needle pointed, then repeat from other starting points.

Showing the pattern with iron filings (Core)

Lay thin card over the magnet, sprinkle filings thinly and tap the card gently. Each filing is magnetised by induction and lines up with the field, gathering along the lines. They show the whole shape in seconds but not the direction, as no filing has a labelled N end.

Field strength from line spacing (Supplement)

Closely packed lines mean a stronger field; widely spaced lines, a weaker one. Round a bar magnet the lines bunch together near each pole, so the field is strongest there; further away they spread out as it weakens. Only spacing matters, not line length, and the field also fills the gaps between drawn lines.

Worked example: reading a field diagram

A bar magnet lies across the page with its N pole on the right. A is 2 cm beyond the N end, on the axis. B is 2 cm from the side, level with the middle. C is 15 cm away.

(a) (Core) Which way does a compass needle point at A, and at B? At A, away from the magnet (to the right), as an N pole there is repelled. At B, parallel to the magnet and towards its S end (to the left).

(b) (Supplement) Rank A, B and C by field strength. A, then B, then C: the lines are tightest near a pole and widest apart at C.

Simulation tasks

In the simulation above, One magnet opens with Field lines already showing.

  1. (Core) Drag the compass round the magnet: the red N end of its needle always lies along the lines.
  2. (Core) Choose Plotting with a compass from the Set-up menu and switch Field lines off. Press Plot about eight times: every press drops a mark at the tip of the N end, then steps the compass forward, until it is blocked near the S pole.
  3. (Core) Press Filings: the same shape appears, without arrows.
  4. (Supplement) Choose Where is it strongest? and read Field strength 2 cm beyond the S end. Drag the compass to 2 cm from the side, level with the middle: the reading drops. Switch on Strength colours: they glow brightest at the poles.

The With the Earth’s field set-up and Neutral points card are extras beyond 0625.

Common mistakes

  • Putting arrows from S to N on the lines outside a magnet. An N pole placed outside the magnet is pushed off its N end and drawn to its S end, so the arrows point from N to S.
  • Drawing lines that cross or touch. The field has only one direction at each point, so two lines can never meet.
  • Claiming that iron filings show the direction of a field. They show its shape only, since nothing marks which end of a filing is N; a plotting compass is needed to add the arrows.
  • Saying that the N end of a compass needle points towards a magnet's N pole. It is repelled by an N pole and attracted to an S pole, so it lines up along the field.
  • Drawing lines that stop in mid-air or that start from the middle of the magnet. On a bar magnet diagram every line begins at the N pole and ends at the S pole, or runs off the edge of the paper.
  • (Supplement) Judging field strength from how long a line is, or thinking there is no field in the gaps between lines. Strength is shown by how close together the lines are, and the field fills the whole region.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A student in Cairo uses a small plotting compass to map the magnetic field around a bar magnet. The magnet lies on a large sheet of paper.

    1. (a)Describe how the student uses the compass to plot one field line.

      4 marks
      Show the answer

      Answer: Put the compass near the N pole and mark a dot at the point of the needle's N end. Then reposition the compass so that the dot lies under the needle's S end, and mark where the N end now points. Repeat until the S pole is reached, then join the dots with a smooth curve.

      Marking points

      • put the compass on the paper near one pole (the N pole)
      • mark a dot at the N end (the point) of the needle
      • slide the compass until the S end (tail) of the needle sits on that dot, then mark again
      • repeat until the other pole is reached and join the dots with a smooth line
    2. (b)State how the student shows the direction of the field on the line.

      1 mark
      Show the answer

      Answer: Draw arrows on the line pointing the way the N end of the needle pointed, from the N pole towards the S pole.

      Marking points

      • arrows pointing from N to S / the way the N end of the needle points
    3. (c)Suggest why the student keeps a steel pencil case well away from the paper during the experiment.

      1 mark
      Show the answer

      Answer: Steel is magnetic, so it could be magnetised and its field could turn the compass needle, making the plot wrong.

      Marking points

      • steel is magnetic / its field affects (deflects) the compass needle
  2. 2.A teacher in Jakarta shows the field of a bar magnet using iron filings.

    1. (a)Describe how the teacher uses the filings to show the field pattern.

      2 marks
      Show the answer

      Answer: Place a sheet of paper or card over the magnet and sprinkle iron filings thinly on it. Tap the card gently so that the filings line up in the pattern of the field.

      Marking points

      • paper (card) on top of the magnet with iron filings sprinkled on it
      • tap the card gently (so the filings form the pattern)
    2. (b)Explain why the filings line up along the field lines.

      2 marks
      Show the answer

      Answer: Each filing becomes magnetised by induction, so it acts as a tiny magnet and turns to line up with the field.

      Marking points

      • each filing is magnetised (has magnetism induced in it) / becomes a small magnet
      • it turns to line up with the field (with the direction of the force)
    3. (c)State one piece of information that a plotting compass gives but the filings do not.

      1 mark
      Show the answer

      Answer: The direction of the field.

      Marking points

      • the direction of the field (which way the lines point)
  3. 3.A bar magnet lies across a page with its N pole on the right. Point P is just beyond the N end, on the magnet's axis. Point Q is beside the middle of the magnet, the same distance from it as P. Point R is a long way from the magnet.

    1. (a)State what is meant by a magnetic field.

      1 mark
      Show the answer

      Answer: The space around a magnet where another magnetic pole is pushed or pulled (has a force on it).

      Marking points

      • region (space) where a magnetic pole has a force on it
    2. (b)State the rule that fixes which way a magnetic field points at any place.

      1 mark
      Show the answer

      Answer: The field points the way that an N pole placed there would be pushed.

      Marking points

      • the way an N (north) pole placed there would be pushed (the force on an N pole)
    3. (c)A plotting compass is placed first at P and then at Q. Describe the direction in which the N end of the needle points at each place.

      2 marks
      Show the answer

      Answer: At P it points away from the magnet, to the right along the axis. At Q it points parallel to the magnet, from the N end towards the S end, to the left.

      Marking points

      • P: away from the magnet / to the right (along the axis)
      • Q: parallel to the magnet towards the S end / to the left
    4. (d)(Supplement) State which of P, Q and R has the strongest field and which has the weakest. Explain how a field-line diagram shows this.

      3 marks
      Show the answer

      Answer: P has the strongest field and R the weakest. On the diagram the lines are closest together near the poles, at P, and furthest apart far from the magnet, at R.

      Marking points

      • strongest at P
      • weakest at R
      • lines are closest together where the field is strongest (furthest apart where it is weakest)
  4. 4.A student draws the magnetic field around a single bar magnet. The drawing has these faults: the arrows point from the S pole to the N pole, two lines cross near the S pole, and the lines are spaced evenly all round the magnet.

    1. (a)State the correct direction of the arrows on the lines outside the magnet.

      1 mark
      Show the answer

      Answer: Pointing from N towards S: each line leaves the N pole and ends at the S pole.

      Marking points

      • from N (north pole) to S (south pole)
    2. (b)Explain why two field lines must not cross.

      2 marks
      Show the answer

      Answer: A field can point only one way at each place. Where two lines crossed, there would be two directions at one spot, which cannot happen.

      Marking points

      • a field has just one direction at each place (the force on an N pole acts one way)
      • crossing lines would give two directions at one point / a compass cannot point two ways
    3. (c)(Supplement) Explain why spacing the lines evenly gives a misleading picture of the field.

      2 marks
      Show the answer

      Answer: Even spacing suggests that the field is equally strong everywhere. The field is strongest at the poles, so the lines should be drawn close together there and further apart away from the magnet.

      Marking points

      • even spacing suggests the same field strength everywhere
      • field is strongest at the poles, so lines should be closer together there (and spread out further away)

Quick check

6 questions

  1. 1.A plotting compass sits just beyond the S pole of a bar magnet, on its axis. Which way does the N end of the needle point?
  2. 2.How is the direction of a magnetic field at a point defined?
  3. 3.What do iron filings sprinkled over a bar magnet show?
  4. 4.Which piece of equipment shows the direction of a magnetic field at a point?
  5. 5.Which statement about the field lines around one bar magnet is correct?
  6. 6.(Supplement) How does a field-line diagram show where a magnetic field is strongest?