Light trying to escape from glass
Most refraction questions send light from air into glass. This topic turns the journey round: the light starts inside a denser medium, such as glass or water, and heads for the boundary with air. As it leaves, it speeds up and bends away from the normal. The next four sections are Core.
Internal reflection and the critical angle (Core)
When light inside a glass block reaches the boundary with air, two things normally happen at once. Most of the light refracts out into the air, and a weaker ray reflects back into the glass. The reflected part is called internal reflection.
Now make the angle of incidence inside the glass bigger, step by step. The refracted ray swings ever closer to the surface, while the reflected ray gets brighter. At one particular angle, the refracted ray skims along the boundary at 90° to the normal. We call this angle of incidence the critical angle, . For ordinary glass it is about 42°.
Total internal reflection (Core)
If the angle of incidence goes past the critical angle, no light escapes at all. Every bit of it reflects back inside the glass, obeying the law of reflection. This is total internal reflection (TIR). It needs two conditions together:
- the light is travelling from a medium where it is slower (glass, water, Perspex) towards one where it is faster (usually air)
- the angle of incidence is larger than the critical angle
So a ray passing from air into glass is never totally internally reflected, at any angle.
Showing it with a semicircular block (Core)
Aim a narrow ray from a ray box at the centre of the flat face of a semicircular glass block, entering through the curved side. Because the ray travels along a radius, it meets the curved surface along the normal and does not bend there. At the flat face, raise the angle of incidence slowly. You will see the weak reflection grow, the refracted ray flatten against the surface at the critical angle, and then total internal reflection take over. A protractor lets you measure the critical angle directly.
Where you meet it every day (Core)
- Prism periscopes use right-angled glass prisms with two 45° angles. Light enters one short face along the normal and meets the long face at 45°, which is more than 42°, so it is reflected completely and turned through 90°. No silvering is needed. Binoculars use similar prisms to fold the light path.
- Bicycle reflectors contain many tiny prisms that send headlight beams back towards the driver.
- Diamonds sparkle because their critical angle is only about 24°, so light bounces around inside many times before escaping.
- Endoscopes let doctors see inside the body through bundles of optical fibres.
Worked example (Supplement)
A student finds that the critical angle of a plastic block is 39°. Calculate the refractive index of the plastic.
Given: .
Equation and substitution:
Answer: (no unit).
Working the other way, water has , so and , about 49°.
Find the critical angle in the simulation
In the simulation above, press the swap button (⇅) between the two menus, or choose Glass → air under Quick set-ups, so the light starts in glass and goes into air. Raise the angle of incidence a degree at a time and watch the refracted ray swing towards the surface. When it disappears, the panel reports total internal reflection. Note the critical angle shown and check it against for . Then try water and diamond: the material with the larger refractive index traps light at a much smaller angle.