What this topic covers
Friction acts whenever surfaces rub or an object moves through air or water.
Friction between solid surfaces (Core)
Where two solid surfaces touch, tiny bumps on each one catch on the other. This produces friction, a force along the surfaces that opposes sliding. On a sliding object it points backwards, against the motion.
Friction can stop motion before it starts. Push a heavy wardrobe gently and it stays put, because friction pushes back exactly as hard as you push and the resultant force is zero. Push harder and it eventually slides. Once something is moving, friction slows it down unless another force keeps it going.
Friction causes heating (Core)
When surfaces slide over each other, work is done against friction. Energy is transferred from the kinetic store of the moving object to the internal (thermal) store of the surfaces, which warm up. Rubbed hands feel warm, and a bike's brake blocks get hot after a hard stop from high speed. Oil in an engine reduces friction, so the moving parts waste less energy and wear more slowly.
Friction can also help: shoes and tyres need grip to push off, turn and brake.
Drag in liquids and gases (Core)
An object moving through a liquid or a gas must push it aside, and the liquid or gas pushes back. This friction force is called drag. In water it is often called water resistance; in air it is air resistance. It acts against the motion of swimmers, boats, hailstones and cyclists. Streamlined shapes reduce drag; a parachute is built to increase it.
Worked example 1: a steady cyclist (Core)
A cyclist in Copenhagen pedals along a flat road with a forward force of 180 N. Air resistance is 140 N, and friction in the tyres and bearings is 40 N. Find the resultant force.
Taking forwards as positive:
Answer: zero, so the speed stays constant. If a headwind raises the air resistance to 165 N, then N: a 25 N backward resultant, and the cyclist slows down.
Worked example 2: pulling a sledge (Supplement)
A child in Norway pulls a 25 kg sledge over level snow with a horizontal force of 60 N. Friction on the runners is 35 N. Find the acceleration.
Given: kg, a 60 N pull and 35 N of friction, so the resultant is N.
Answer: 1.0 m/s² in the direction of the pull. Using the 60 N pull alone would wrongly give 2.4 m/s².
Drag grows with speed (Supplement)
Drag increases as an object moves faster. A falling skydiver's weight stays the same, but the air resistance rises with speed until the two are equal. With no resultant force left, the skydiver falls at a steady terminal velocity. Explore this with the falling-object simulation.
In the simulation above
The sim starts with a 2 kg block of wood on a wooden bench. The Normal contact force card reads 19.6 N and, with no pull, Friction shows 0.
- (Core) Drag the Applied force slider to 4.0 N. The block stays still: Friction reads 4.00 N (static, can reach 9.80 N) and the Resultant force is 0.
- (Core) Press Pull beside Play. The pull climbs by 2 N every second and friction keeps pace until the pull passes 9.80 N. The block slips, and friction drops to 5.88 N. A second press on Pull holds the force steady, yet the block keeps accelerating: the pull now beats friction.
- (Core) Press Ease. Once the pull falls below 5.88 N, the backward resultant force brings the block to a stop.
- (Core) Under Surfaces in contact, choose Steel block on ice and press Pull. The block slips at only 0.784 N and slides against just 0.392 N of friction.
The Friction against applied force graph shows a rising line, a sudden drop, then a flat line. The sim calculates friction from coefficients (, ), a model detail that Cambridge does not ask you to use.