What this topic covers
This topic links the resultant force on an object to the acceleration it produces. The equation itself is Supplement content for Extended candidates, but it rests on Core ideas that everyone needs.
The equation (Supplement)
Cambridge gives no equation sheet, so learn this one by heart:
- is the resultant force on the object, in newtons (N)
- is its mass, in kilograms (kg)
- is its acceleration, in m/s²
Two patterns follow from it. With the mass fixed, doubling the resultant force doubles the acceleration. With the force fixed, doubling the mass halves the acceleration. The equation also tells you what a newton is: 1 N gives a 1 kg mass an acceleration of 1 m/s².
Notice the word resultant. Before you divide by the mass, combine every force along the line of motion. A car's engine force on its own will not give the right answer if friction and air resistance are also acting.
Which way is the acceleration? (Supplement)
The acceleration always has the same direction as the resultant force. That need not be the direction of motion. When a cyclist brakes, the bike still rolls forwards but the resultant force points backwards, so the acceleration is backwards too. This is a deceleration, which you can write as a negative acceleration.
Worked example 1: a cargo bike (Supplement)
A cargo bike in Amsterdam, with its rider and load, has a mass of 140 kg. The rider's pedalling gives a forward force of 260 N, while air resistance and friction total 92 N. Calculate the acceleration.
Given: kg; forces 260 N forwards and 92 N backwards.
Resultant force: N forwards.
Answer: 1.2 m/s², forwards.
Worked example 2: braking to a stop (Supplement)
A car of mass 1500 kg in Canada slows steadily from 24 m/s to rest in 5.0 s. Find the braking force, assuming it is the only horizontal force.
Step 1, the acceleration:
Step 2, the force:
Answer: 7200 N. The minus sign shows that it acts backwards, against the motion, just like the acceleration.
Vertical motion (Supplement, using Core weight)
For a lift, a rocket or a crane load, the weight is one of the forces. Work it out first with . An 800 kg lift pulled up by a cable tension of 8800 N has a weight of 7840 N, so the resultant is 960 N upwards and the acceleration is m/s² upwards.
Trolley experiments to try
In the simulation above, a 100 g hanging mass pulls a 0.9 kg trolley (set-up 100 g hanging, 0.9 kg trolley). The weight of the hanging mass, 0.98 N, has to accelerate the trolley and the hanging mass together, a total of 1.0 kg. The Acceleration card therefore reads 0.980 m/s².
- Press Play. While the string is pulling, the velocity–time graph is a straight sloping line; it levels off once the hanging mass reaches the floor. Use the Gradient (tangent) tool on the sloping part to measure the acceleration.
- Once the card has passed both light gates, press Record beside Play.
- Press Move 100 g to the hanger, play again and record. The pull doubles to 1.96 N while the total mass stays 1.0 kg, so the acceleration doubles. Moving a piece, rather than adding a new one, keeps the test fair.
- After a few runs, choose a against F under the results. The points fall on a straight line that passes through the origin.
- Press Clear table. From Set-up, pick 1.0 N pull, empty 0.5 kg trolley, then 1.0 N pull, 1.0 kg trolley, recording each. Twice the mass gives half the acceleration: 2.0 m/s² and then 1.0 m/s². Try a against 1/m to see that pattern as a straight line.