Skip to content

GCSE Physics — AQA · Forces and motion

Newton's first law

4.5.6.2.1

With zero resultant force, an object at rest stays at rest and a moving object keeps the same velocity. A vehicle at steady speed has its driving force balanced by resistive forces. Velocity changes only when a resultant force acts. Higher tier: inertia.

Loading simulation…

Symbols match your course. Open the full free-body diagrams and resultant force simulation for more presets and teacher tools.

Newton's first law in AQA 8463

This is spec point 4.5.6.2.1. Everything here is on both tiers except inertia, which is Higher tier only. There is no new equation, but questions often combine this law with weight, W=mgW = mg, which you must recall.

What the law says

Look at the resultant force on an object. If it is zero:

  • an object at rest stays at rest;
  • an object that is moving carries on at the same speed in the same direction. In other words, its velocity does not change.

So balanced forces do not mean that something is stationary. A plane flying straight and level at a steady speed and a parked bike both have a resultant force of zero. One is moving and one is not, and neither has a changing velocity.

Turn the law round and you get a useful test: if an object's velocity changes, there must be a resultant force on it. A change of velocity means any of three things: speeding up, slowing down, or changing direction.

Steady speed needs balanced forces, not zero forces

Many people think something moving needs an overall forward force to keep going. It doesn't. A train running at a steady 50 m/s on a straight, level track still needs its motors, but only to cancel the friction and air resistance acting on it. When the driving force matches the resistive forces, the resultant is zero and the speed stays constant.

When the forces stop matching, the motion changes:

  • driving force bigger than resistive forces: the vehicle speeds up;
  • resistive forces bigger: it slows down;
  • a sideways resultant force: it changes direction. A car turning a corner relies on sideways friction from the road. On black ice there is almost no friction, so the car carries straight on.

Higher tier: inertia

Inertia is the name for the way every object tends to carry on as it is: a resting object stays put, and a moving one keeps a constant velocity. When a bus brakes sharply, standing passengers stumble towards the front. Nothing shoves them that way. They simply continue at the old speed while the bus slows beneath them, until a handrail or the seat in front provides the force that slows them too. Objects with more mass are harder to speed up, slow down or turn.

Worked example: a lift on a steady journey

A lift and its passengers have a total mass of 850 kg. The lift rises at a steady 2.0 m/s. Take g=9.8g = 9.8 N/kg and ignore friction and air resistance. Find the tension in the cable.

Step 1, weight. Given: m=850m = 850 kg, g=9.8g = 9.8 N/kg. Equation: W=mgW = mg. Substitution: W=850×9.8W = 850 \times 9.8. Answer: W=8330W = 8330 N.

Step 2, apply the first law. The velocity is constant, so the resultant force is zero. The upward tension must equal the downward weight: 8330 N, or 8300 N to 2 s.f.

Notice that the 2.0 m/s never entered the working. The tension would be exactly the same if the lift moved down at a steady speed, or hung at rest between floors.

Using the simulation

In the simulation above, choose Microlight plane in level flight. Lift and weight are both 1960 N, and thrust and drag are both 300 N, so the Balanced badge shows. The starting speed under What happens next? is already 30 m/s to the right. Press What next? and watch the faint copies left every half second: the gaps are equal. After 3 s the plane has moved 90 m and its speed is still 30 m/s.

Press Back to forces, make the thrust much larger than the drag (try 1000 N), and run it again. The gaps now grow, because there is a resultant force forwards.

Next, pick Box on a table, which starts at rest, and press What next?: it stays at rest. Then set Starting speed to 5 m/s and run it again. Nothing pushes the box, yet it slides at a constant velocity, because this model has no friction. In a real room, friction would give a backward resultant force and the box would slow down and stop.

Common mistakes

  • Writing that balanced forces mean an object is stationary. Zero resultant force means the velocity does not change, so a moving object keeps moving.
  • Believing a vehicle needs a forward resultant force to travel at a steady speed. The driving force only has to equal the resistive forces.
  • Forgetting that turning is a change in velocity. A car going round a bend at a steady speed must have a resultant force acting on it.
  • Treating speed and velocity as the same thing. The first law keeps the velocity constant, so neither the speed nor the direction alters.
  • Higher tier: describing inertia as a force that throws passengers forwards when a bus brakes. Inertia is a tendency to keep the same motion, not a force.
  • Higher tier: thinking inertia only applies to moving objects. A resting object also tends to stay at rest.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A car travels along a straight, level motorway at a constant speed of 31 m/s. The driving force on the car is 2600 N.

    1. (a)State Newton's first law.

      2 marks
      Show the answer

      Answer: If the resultant force on an object is zero, a stationary object stays stationary, and a moving object continues to move at the same speed in the same direction (at a constant velocity).

      Marking points

      • Resultant force zero: a stationary object remains stationary.
      • Resultant force zero: a moving object keeps the same speed and direction (constant velocity).
    2. (b)State the total resistive force on the car. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 2600 N, because the car moves at a constant velocity, so the resultant force on it is zero.

      Marking points

      • 2600 N
      • Velocity is constant, which means zero resultant force (balanced forces).
    3. (c)The driving force increases to 3100 N. At first the resistive force is unchanged. Describe and explain what happens to the motion of the car.

      2 marks
      Show the answer

      Answer: There is now a resultant force of 500 N forwards, so the car speeds up (accelerates).

      Marking points

      • Resultant force of 500 N forwards (driving force greater than resistive force).
      • The car accelerates (its speed increases).
  2. 2.A space probe is so far from any planet or star that gravitational forces on it are negligible. It drifts at 15 km/s with its engine switched off.

    1. (a)Explain why the probe keeps moving at 15 km/s even though its engine is off.

      2 marks
      Show the answer

      Answer: There is no resistive force and no other force, so the resultant force is zero. By Newton's first law its velocity stays constant.

      Marking points

      • No (negligible) forces act, so the resultant force is zero.
      • So the velocity does not change (Newton's first law).
    2. (b)The engine is fired briefly so that its thrust acts at right angles to the probe's motion. State what happens to the probe's velocity. Give a reason.

      2 marks
      Show the answer

      Answer: The velocity changes, because the direction of motion changes. There is now a resultant force acting on the probe.

      Marking points

      • The direction of motion changes, so the velocity changes.
      • Because a resultant force now acts.
  3. 3.A crane lifts a steel beam of mass 1200 kg. Gravitational field strength = 9.8 N/kg. Ignore air resistance.

    1. (a)Calculate the weight of the beam.

      2 marks
      Show the answer

      Answer: W = m g = 1200 × 9.8 = 11 760 N

      Marking points

      • W = 1200 × 9.8
      • W = 11 760 N (accept 11 800 N)
    2. (b)The beam rises at a constant speed. State the tension in the crane's cable. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 11 760 N, because the beam moves at a constant velocity, so the resultant force is zero and the tension equals the weight.

      Marking points

      • 11 760 N (accept 11 800 N, or equal to the weight).
      • Constant velocity, so the resultant force is zero.
    3. (c)A student says: 'The tension must be bigger than the weight, otherwise the beam could not keep going up.' Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: A resultant force is only needed to change the velocity. Once the beam is rising at a steady speed, zero resultant force keeps it rising at that speed, so the tension equals the weight.

      Marking points

      • A resultant force is needed only to change velocity (speed up, slow down or change direction).
      • At a constant upward velocity the resultant force is zero, so tension equals weight.
  4. 4.Higher tier. A passenger is standing on a train, without holding on, as the train pulls away from a station.

    1. (a)Give the name of the tendency of an object to stay at rest or to keep moving with a uniform velocity.

      1 mark
      Show the answer

      Answer: Inertia.

      Marking points

      • Inertia.
    2. (b)Explain why the passenger tends to fall backwards as the train speeds up.

      2 marks
      Show the answer

      Answer: The passenger's body tends to stay at rest (its inertia), while the floor and the train speed up forwards. So, compared with the train, the passenger's upper body moves backwards.

      Marking points

      • The passenger's body tends to remain at rest (keep its original velocity) because of inertia.
      • The train accelerates forwards, so the passenger moves backwards relative to the train.
    3. (c)An empty shopping trolley and a fully loaded one are pushed with the same resultant force. State which one has the greater inertia.

      1 mark
      Show the answer

      Answer: The loaded trolley, because it has the greater mass.

      Marking points

      • The loaded trolley (greater mass).

Quick check

6 questions

  1. 1.The resultant force on a moving object is zero. What happens to the object?
  2. 2.A lorry moves along a level road at a constant velocity. The driving force is 4500 N. What is the total resistive force?
  3. 3.Which of these must have a resultant force acting on it?
  4. 4.Higher tier: what is inertia?
  5. 5.A book rests on a shelf. Which statement about the forces on the book is correct?
  6. 6.A puck slides across very smooth ice at 2 m/s. The forces on it are balanced. What is its velocity 5 s later?