Skip to content

Punjab Board Class 9 Physics · Dynamics

Free-body diagrams

Section 3.3

A free-body diagram shows one body as a box with an arrow for every force acting on it. Arrows start at the centre, point the way each force acts, have lengths in proportion to the force and carry a label. Forces the body exerts on other things are left out.

Loading simulation…

Symbols match your course. Open the full free-body diagrams and resultant force simulation for more presets and teacher tools.

What a free-body diagram shows

A free-body diagram is a sketch of one body with every force that acts on it, and nothing else. The body is drawn as a small box or a dot. Each force is an arrow that starts at the centre of the box and points outwards, in the direction the force acts. Your textbook calls it a special case of a vector diagram, because every arrow stands for a vector.

Each arrow carries three pieces of information:

  • the arrowhead shows which way the force acts;
  • the length shows how big the force is, so a force twice as large gets an arrow twice as long;
  • the label says which force it is (weight, friction, tension, normal force and so on), often with its value in newtons.

A good diagram lets an examiner see at a glance which forces balance and which do not.

Drawing one step by step

  1. Choose the single body you are studying and draw it as a box.
  2. Draw its weight first: an arrow straight down from the centre, w=mgw = mg.
  3. Look for everything that touches the body. A surface gives a normal force, and friction if the body slides or tries to slide. A rope gives tension. Moving air gives air resistance.
  4. Add any other non-contact force, such as a magnet's pull.
  5. Give equal forces equal arrows, and make a bigger force a longer arrow.
  6. Leave out forces that the body exerts on other things. A trunk presses down on the floor, but that force acts on the floor, so it belongs on the floor's diagram, not the trunk's.

Diagrams for everyday bodies

BodyForces to draw
A ceiling fan hanging still, switched offWeight down; pull of the rod up, the same length
A bucket lifted from a well at a steady speedWeight down; tension in the rope up, the same length
A rickshaw moving steadily on a level roadWeight down, normal force up; driving force forward, friction and air resistance backward
A stone falling, with air resistance ignoredWeight down only

From the diagram to the resultant force

Once all the arrows are drawn, treat the vertical and horizontal forces separately. Forces pointing the same way add. Forces pointing opposite ways subtract, and their resultant points the way of the larger one. If both totals are zero the forces are balanced. If not, the resultant force gives the acceleration through F=maF = ma.

Worked numerical

A crate of mangoes of mass 25 kg is dragged across a level floor at a Multan fruit market by a horizontal rope. The tension in the rope is 120 N and the friction on the crate is 70 N. Draw the free-body diagram, then find the resultant force and the acceleration. Take g=10 N kg−1g = 10\ \text{N kg}^{-1}.

Forces on the crate:

  • weight: w=mg=25×10=250 Nw = mg = 25 \times 10 = 250\ \text{N}, downwards
  • normal force from the floor: 250 N, upwards (the crate does not rise or sink)
  • tension: 120 N, forwards
  • friction: 70 N, backwards

Vertical: 250−250=0250 - 250 = 0, so there is no vertical resultant.

Horizontal:

F=120−70=50 N forwardsa=Fm=5025=2 m s−2F = 120 - 70 = 50\ \text{N forwards} \qquad a = \frac{F}{m} = \frac{50}{25} = 2\ \text{m s}^{-2}

The crate speeds up at 2 m s−22\ \text{m s}^{-2} in the direction of the pull.

Building diagrams in the simulation

In the simulation above, the crate in Pushing a crate is already drawn as a free-body diagram with the Scale grid on. Read the scale printed on the picture and use the squares to estimate each arrow, then compare with the chips under Forces: 20.0 N, 20.0 N, 12.0 N and 8.00 N. The red arrow is the resultant, 4.00 N to the right, and the Horizontal total and Vertical total readouts show how it was found.

Now rebuild the mango crate. Choose Empty: add your own forces and press Add four times. For each arrow, pick a Name, type its value in Size (N) and set its direction with Point it. The readouts should give a Resultant force of 50.0 N and a Direction of 0°. Set Mass to 25 kg and press What next?: after 3 s the speed reads 6.00 m/s, as vf=vi+at=0+2×3v_f = v_i + at = 0 + 2 \times 3 predicts.

Then switch View to Vector diagram to see the same forces joined tip to tail.

Common mistakes

  • Drawing forces that the body exerts on something else, such as a book's push on the table. Only forces acting on the chosen body belong on its diagram.
  • Making all the arrows the same length. Arrow length must show the size of each force, so balanced forces get equal arrows and a larger force a longer one.
  • Leaving out the normal force on a body resting on a surface, or the weight of a body hanging from a string.
  • Drawing friction or air resistance in the direction of motion. Both act against the motion (or attempted motion).
  • Adding a separate 'force of motion' in the direction a body is moving. A moving body needs no forward force unless something actually pushes or pulls it.
  • Leaving arrows unlabelled. Each arrow must name its force, and usually its value in newtons.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Free-body diagrams are used to show the forces acting on a body.

    1. (a)What is a free-body diagram?

      2 marks
      Show the answer

      Answer: A diagram of a single body, drawn as a box or dot, showing all the forces acting on it as labelled arrows, with their relative sizes and directions.

      Marking points

      • Shows one (single) body, drawn as a box or dot
      • All forces acting on it shown as arrows with their sizes and directions
    2. (b)State what the length and the head of each arrow represent.

      2 marks
      Show the answer

      Answer: The length represents the size (magnitude) of the force; the arrowhead shows the direction in which it acts.

      Marking points

      • Length shows the magnitude of the force
      • Arrowhead shows the direction of the force
  2. 2.A ceiling fan of mass 6 kg is switched off and hangs at rest from its rod. Take g = 10 N kg⁻¹.

    1. (a)Name the two forces acting on the fan and state their directions.

      2 marks
      Show the answer

      Answer: Its weight, acting vertically downwards, and the pull (tension) of the rod, acting vertically upwards.

      Marking points

      • Weight, downwards
      • Pull (tension) of the rod, upwards
    2. (b)Calculate the size of each force.

      2 marks
      Show the answer

      Answer: Weight w = mg = 6 × 10 = 60 N. The fan is at rest, so the pull of the rod is also 60 N.

      Marking points

      • w = mg = 6 × 10 = 60 N
      • Pull of the rod = 60 N (forces balance because the fan is at rest)
  3. 3.A car of mass 1200 kg moves along a level road. The forward driving force on it is 3000 N and the total of friction and air resistance is 1800 N. Take g = 10 N kg⁻¹.

    1. (a)List the four forces you would show on a free-body diagram of the car, with the direction of each.

      2 marks
      Show the answer

      Answer: Weight (12000 N) downwards; normal force from the road (12000 N) upwards; driving force (3000 N) forwards; friction and air resistance (1800 N) backwards.

      Marking points

      • Weight downwards and normal force upwards
      • Driving force forwards and friction/air resistance backwards
    2. (b)Calculate the resultant force on the car.

      2 marks
      Show the answer

      Answer: Vertical forces cancel. Horizontal: F = 3000 − 1800 = 1200 N in the forward direction.

      Marking points

      • F = 3000 − 1800
      • 1200 N forwards
    3. (c)Calculate the acceleration of the car.

      2 marks
      Show the answer

      Answer: a = F ÷ m = 1200 ÷ 1200 = 1 m s⁻² forwards.

      Marking points

      • Uses a = F ÷ m
      • 1 m s⁻²
  4. 4.A student draws the free-body diagram of a book lying on a table. The diagram shows three arrows: the weight of the book, the upward push of the table, and the downward push of the book on the table.

    1. (a)Identify the arrow that should not be on the diagram and explain why.

      2 marks
      Show the answer

      Answer: The downward push of the book on the table. That force acts on the table, not on the book, and a free-body diagram shows only the forces acting on the chosen body.

      Marking points

      • The push of the book on the table
      • It acts on the table, not on the book

Quick check

6 questions

  1. 1.In a free-body diagram, the length of a force arrow shows the force's:
  2. 2.A trunk rests on a floor. Which force does NOT belong on the trunk's free-body diagram?
  3. 3.A shopkeeper pushes a box to the right with 30 N while friction acts on it with 18 N. The resultant horizontal force is:
  4. 4.A stone is falling freely with no air resistance. How many force arrows does its free-body diagram have?
  5. 5.A box of weight 50 N rests on a table. On its free-body diagram, the normal force arrow is:
  6. 6.A skydiver falls at a steady speed. Which free-body diagram is correct?