The Wave Equation: Frequency, Wavelength and Wave Speed Explained
Learn the parts of a wave, the difference between transverse and longitudinal waves, and how to use v = fλ and T = 1/f without falling into unit traps.
Published · 6 min read
On this page
The wave equation links the speed of a wave to its frequency and wavelength:
Here v is the wave speed in metres per second (m/s), f is the frequency in hertz (Hz) and λ (the Greek letter lambda) is the wavelength in metres (m). In words, wave speed = frequency × wavelength.
A second equation links frequency to the period, T, which is the time for one complete wave:
These two equations work for every kind of wave: sound, water waves, light and radio. The hard part is usually the units, not the physics. This guide explains each quantity, then works through examples with sound, water and light.
What is the difference between transverse and longitudinal waves?
All waves transfer energy from one place to another without transferring matter. A duck on a pond bobs up and down as ripples pass. It does not travel across the pond with them.
The two types of wave differ in the direction of the oscillations (vibrations):
| Type | Direction of oscillation | Examples |
|---|---|---|
| Transverse | At right angles (perpendicular) to the direction of energy transfer | Light and all electromagnetic waves, waves on a string, ripples on water |
| Longitudinal | Parallel to the direction of energy transfer | Sound, ultrasound, P-waves from earthquakes |
A longitudinal wave has compressions, where particles are squashed close together, and rarefactions, where they are spread apart. You can see both kinds side by side in the transverse and longitudinal waves simulation. Watch one particle and notice that it only moves back and forth around a fixed point.
What do amplitude, wavelength, frequency and period mean?
- Amplitude: the maximum displacement of a point from its rest (undisturbed) position. Measure it from the middle line to a crest, not from a trough to a crest.
- Wavelength (λ): the distance from one point on a wave to the same point on the next wave, such as crest to crest. For a longitudinal wave, it is the distance from one compression to the next.
- Frequency (f): the number of waves passing a point each second. 1 Hz means one wave per second.
- Period (T): the time for one complete wave to pass a point, in seconds.
Frequency and period are linked: each one is 1 divided by the other. If 4 waves pass each second, each one takes a quarter of a second. So f = 4.0 Hz and T = 0.25 s.
Reading the period from an oscilloscope
An oscilloscope connected to a microphone shows a sound wave as a trace on a screen. The horizontal axis is time. Count how many squares one complete wave covers, then multiply by the time setting.
For example, one wave covers 4 squares, and the time setting is 0.5 ms per square. The period is 4 × 0.5 = 2.0 ms = 0.0020 s. So the frequency is
A taller trace means a larger amplitude, which sounds louder. More waves squeezed onto the screen means a higher frequency, which sounds higher in pitch. Try changing the loudness and pitch in the sound waves and oscilloscope simulation and watch the trace change.
How do you use v = fλ?
The equation rearranges in the usual way:
Before substituting, convert every value to base units: Hz, m and m/s.
Worked example 1: a musical note
A violinist in Vienna plays a note with a frequency of 440 Hz. The speed of sound in air is 340 m/s. Find the wavelength and the period of the sound wave.
Given: f = 440 Hz, v = 340 m/s
Equation:
Substitution:
Answer: λ = 0.77 m (2 significant figures)
Period: , or 2.3 ms
Worked example 2: waves at a beach
A student on a beach in Goa counts 12 waves passing a buoy in 60 s. The crests are 25 m apart. Find the frequency, the period and the speed of the waves.
Frequency: waves per second = 12 ÷ 60 = 0.20 Hz
Period:
Speed equation:
Substitution:
Answer: v = 5.0 m/s
In a school ripple tank, the numbers are smaller. If the frequency is 8.0 Hz and the wavelength is 1.5 cm, first convert 1.5 cm to 0.015 m. Then v = 8.0 × 0.015 = 0.12 m/s.
Worked example 3: green light
Green light has a wavelength of 530 nm. The speed of light is m/s. Find its frequency.
Convert: 1 nm = m, so
Equation:
Substitution:
Answer: (2 significant figures)
Use the standard form key on your calculator, often marked EXP or ×10ˣ. Typing the powers of ten by hand is a common source of errors.
All electromagnetic waves travel at the same speed in a vacuum. So the shorter the wavelength, the higher the frequency. An FM radio station at 100 MHz has a wavelength of . Wi-Fi at 2.4 GHz has a wavelength of 0.125 m, or 12.5 cm. You can compare the whole range in the electromagnetic spectrum simulation.
What are the common unit traps?
Most wrong answers on this topic come from prefixes. Convert before you substitute.
| You see | Multiply by | Example |
|---|---|---|
| kHz (kilohertz) | 1000 | 50 kHz = 50 000 Hz |
| MHz (megahertz) | 10⁶ (one million) | 100 MHz = 1.0 × 10⁸ Hz |
| GHz (gigahertz) | 10⁹ (one billion) | 2.4 GHz = 2.4 × 10⁹ Hz |
| cm (centimetres) | 0.01 | 1.5 cm = 0.015 m |
| mm (millimetres) | 0.001 | 6.8 mm = 0.0068 m |
| nm (nanometres) | 10⁻⁹ | 530 nm = 5.3 × 10⁻⁷ m |
| ms (milliseconds) | 0.001 | 2.0 ms = 0.0020 s |
For example, a bat sends out ultrasound at 50 kHz. With f = 50 000 Hz and v = 340 m/s, the wavelength is 340 ÷ 50 000 = 0.0068 m, or 6.8 mm. If you forget to convert kHz, you get 6.8 m, which is a thousand times too big.
Does the frequency change when a wave enters a new material?
No. When a wave passes into a new material, its frequency stays the same, because it is set by the source. The speed changes, so the wavelength changes too. For example, sound travels about four times faster in water than in air. So the same note has a wavelength about four times longer in water.
Common mistakes
- Measuring amplitude from trough to crest. That gives twice the amplitude.
- Measuring wavelength from a crest to the next trough. That is only half a wavelength.
- Forgetting prefixes. Convert kHz, MHz, cm and nm before you use the equation.
- Mixing up frequency and period. Frequency is waves per second. Period is seconds per wave.
- Saying waves carry matter. Waves transfer energy. The particles only oscillate about fixed positions.
- Calling sound transverse. Sound is longitudinal. Light is transverse.
Key points
- Wave speed = frequency × wavelength, .
- Period and frequency: .
- Transverse waves oscillate at right angles to the energy transfer. Longitudinal waves oscillate parallel to it.
- Amplitude is measured from the rest position to a crest.
- Convert every quantity to Hz, m and s before substituting.
- When a wave enters a new material, its frequency stays the same, while its speed and wavelength change.