Five scenes, one idea
A worker shoves a crate across a warehouse floor, a crane hoists a box, someone drags a loaded sledge through snow, a student walks along with a bag, and a worker leans hard against a brick wall. A yellow tape measures how far the object moves, a bar shows how much energy reaches a store, and a force–distance graph grows as the object travels.
Force times distance
When the force points the same way as the motion,
where is the work done in joules, is the force in newtons and is how far the object moves along the line of the force, in metres. Your course may call the distance or : pick your course under the symbol switcher and the sim uses its letters. A joule is a newton multiplied by a metre, so 1 J and 1 N m are the same amount.
With the starting values, a 150 N push over 4.0 m gives J. Double either number and the answer doubles.
Following the energy
Work done tells you how much energy has been moved somewhere, and the sim always shows where.
- The crate slides at a constant speed, so the floor's friction matches the push exactly and the crate's kinetic energy never changes. All of the work warms the underside of the crate and the floor, and the glow at the contact grows the further it slides.
- The crane's box rises at a steady speed, so the cable force equals the weight, , and the work comes to . That energy is stored as gravitational potential energy. The value of follows your course: 9.8 N/kg for most, 10 N/kg for Punjab.
- The sledge is like the crate: friction balances the forward pull, so the work heats the runners and the snow.
Forces that do no work
Two scenes give zero, and they trip up a lot of students. Carrying a bag at a steady speed along a level corridor needs an upward force as big as the bag's weight, yet that force does no work on the bag, because the bag moves sideways, at right angles to it, and never rises. Leaning on a wall that stays put also does no work on the wall, however hard or long you push, since the wall does not move. In both cases your arms still get tired, because your muscles use chemical energy and warm up, but that is not work done on the bag or the wall.
Reading the graph
The graph plots the force along the motion against the distance moved. A steady force gives a flat line, and the rectangle under it has an area of force × distance: the work done. Pick the area tool and drag across part of the graph to find the work over that stretch alone. For the bag the line sits on the axis, so there is no area.
A rope at an angle (advanced)
Switch on Rope at an angle in the sledge scene. Now only the horizontal part of the pull, , drags the sledge forwards, so
A 10 N pull at 60° over 5.0 m does J. The vertical part, , does no work, since the sledge never leaves the snow. The AQA GCSE and Cambridge IGCSE equations use a force along the motion, so treat this as extension work there. The Punjab Class 9 course includes it.
The model
Starting and stopping are left out: each object moves at one steady speed for the whole distance, and air resistance is ignored. If the crate or the box starts and finishes at rest, the push or the cable still does the same total work, because there is no overall change in kinetic energy.