Skip to content

Punjab Board Class 9 Physics · Work, energy and power

Work

Section 5.1

Work is done when a force moves a body in the direction of the force: W = FS, or W = FS cos θ when the force is at angle θ to the motion. Work is a scalar measured in joules (1 J = 1 N m). No work is done if the body does not move or if the force is at 90° to the motion.

Loading simulation…

Symbols match your course. Open the full work done simulation for more presets and teacher tools.

Work in physics

In everyday speech, "work" means almost any effort, even standing in a queue. Physics is stricter. A force does work only when it acts on a body and the body moves in the direction of that force.

Work is the product of a force and the distance through which it moves a body in its own direction:

W=F×SW = F \times S

Here FF is the force in newtons and SS is the distance moved along the force, in metres. Your book usually writes weight as a small ww; on this page, capital WW always means work.

Unit of work

The SI unit of work is the joule (J). A force of one newton that moves a body one metre along its own direction does one joule of work:

1 J=1 N×1 m=1 N m1\ \text{J} = 1\ \text{N} \times 1\ \text{m} = 1\ \text{N m}

Bigger amounts are given in kilojoules (1 kJ=103 J1\ \text{kJ} = 10^3\ \text{J}) and megajoules (1 MJ=106 J1\ \text{MJ} = 10^6\ \text{J}).

Work is a scalar quantity. It has size only. The same force moving a body the same distance does the same work whichever way the body travels, so work has no direction. A force that does work on a body transfers energy to it, and the work done equals the energy transferred.

A force at an angle

A rope tied to a cart usually slopes upwards, so only part of the pull acts along the road. If the force makes an angle θ\theta with the direction of motion, resolve it into Fcos⁡θF\cos\theta along the motion and Fsin⁡θF\sin\theta at right angles to it. Only the component along the motion does work:

W=FScos⁡θW = FS\cos\theta
  • At θ=0∘\theta = 0^\circ, cos⁡0∘=1\cos 0^\circ = 1 and W=FSW = FS: the most work that force can do over that distance.
  • At θ=90∘\theta = 90^\circ, cos⁡90∘=0\cos 90^\circ = 0 and W=0W = 0.

When is no work done?

  1. The body does not move (S=0S = 0). People push hard on a truck stuck in mud, but it does not move at all, so they do no work on it.
  2. There is no force (F=0F = 0). A space probe coasting at steady velocity far from any planet needs no force, so no work is done on it.
  3. The force acts at 90° to the motion. A porter walks along a level railway platform with a suitcase balanced on their head. The supporting force is upward, but the case travels sideways and never rises, so that force does no work on it.

Feeling tired is the muscles using chemical energy, not work done on the load.

Work from a force–distance graph

Put distance on the horizontal axis and the force along the motion on the vertical axis. A constant force plots as a horizontal line; the rectangle beneath it measures F×SF \times S. So the area under a force–distance graph is the work done. If the force changes in steps, add the area of each strip.

Worked numerical 1: pulling a handcart

A fruit seller pulls a loaded handcart 25 m along a level road. The rope is at 60° to the road and the pull in it is 80 N. Find the work done by the pull.

Data: F=80 NF = 80\ \text{N}, S=25 mS = 25\ \text{m}, θ=60∘\theta = 60^\circ, W=?W = ?

W=FScos⁡θ=80 N×25 m×cos⁡60∘=80×25×0.5=1000 J=1 kJW = FS\cos\theta = 80\ \text{N} \times 25\ \text{m} \times \cos 60^\circ = 80 \times 25 \times 0.5 = 1000\ \text{J} = 1\ \text{kJ}

Worked numerical 2: loading a truck

A labourer lifts a 25 kg bag of cement at a steady speed from the ground onto a truck bed 1.2 m high. Find the work done. Take g=10 m s−2g = 10\ \text{m s}^{-2}.

The bag rises steadily, so the upward force on it equals its weight, and force and motion are both upwards (θ=0∘\theta = 0^\circ):

F=w=mg=25 kg×10 m s−2=250 NF = w = mg = 25\ \text{kg} \times 10\ \text{m s}^{-2} = 250\ \text{N} W=FS=250 N×1.2 m=300 JW = FS = 250\ \text{N} \times 1.2\ \text{m} = 300\ \text{J}

Exploring the simulation: crate, sledge, crane

In the simulation above, the first situation is Push a crate across a floor, with a 150 N push over 4 m. Press Play, or press End to see the finished run at once. The Work done card reads 600 J, which the working confirms as 150 N×4 m150\ \text{N} \times 4\ \text{m}, and the shaded area under the Force–distance graph is also 600 J.

  1. From Situation, choose Pull a sledge with a rope, then switch on Rope at an angle. The rope starts at 30°, so only 130 N of the 150 N pull acts along the snow and the work done drops to 520 J. Drag Rope angle above the ground to 60°: the work falls to 300 J because cos⁡60∘=0.5\cos 60^\circ = 0.5.
  2. Pick Lift a box with a crane. With g = 10 N/kg, the 20 kg box needs a 200 N cable force, so raising it 4 m takes 800 J.
  3. Now try Carry a bag across a floor: the hand pushes up with 80.0 N at 90° to the motion, and the work done is 0 J. Push against a wall gives 0 J too, since the wall never moves.

Equations

  • Work done

    Learn this

    W=FS

    work done = force × distance (along the line of action of the force)

    Open calculator →

Common mistakes

  • Using sin θ instead of cos θ. θ is measured between the force and the direction of motion, so the useful component is F cos θ.
  • Putting a mass in kilograms straight into W = FS for a lifted load. Work out the weight in newtons first, w = mg = m × 10.
  • Saying work is done whenever someone gets tired, such as when holding a load still or pushing a wall that does not move. With no movement, S = 0 and W = 0.
  • Counting work for a force at right angles to the motion, such as the upward force on a bag carried along a level corridor. Here θ = 90°, cos 90° = 0, so W = 0.
  • Giving work a direction. Work is a scalar: write its size in joules, never north, east or upwards.
  • Leaving distances in centimetres or forces in kilonewtons. Change them to metres and newtons first so the answer comes out in joules.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Work has a special meaning in physics.

    1. (a)State what is meant by work in physics, and name its SI unit.

      2 marks
      Show the answer

      Answer: Work is the product of a force and the distance through which it moves a body in its own direction (W = F × S). Its SI unit is the joule (J).

      Marking points

      • Product of force and distance covered in the force’s own direction
      • Joule (J)
    2. (b)Define one joule.

      1 mark
      Show the answer

      Answer: One joule is the work a force of 1 N does when it moves a body 1 m along its own direction.

      Marking points

      • 1 N force moving a body 1 m in its own direction
    3. (c)State whether work is a scalar or a vector, with a reason.

      2 marks
      Show the answer

      Answer: Work is a scalar quantity. It has magnitude only, because it is calculated from the magnitudes of the force and the distance and has no direction.

      Marking points

      • Scalar
      • Has magnitude only / no direction
  2. 2.A shopkeeper drags a sack of rice 6.0 m across a level floor by pulling on a rope with a force of 200 N.

    1. (a)Calculate the work done by the pull when the rope is parallel to the floor.

      2 marks
      Show the answer

      Answer: W = FS = 200 N × 6.0 m = 1200 J.

      Marking points

      • W = FS = 200 × 6.0
      • 1200 J
    2. (b)The rope is now held at 60° to the floor, with the same 200 N pull over the same 6.0 m. Calculate the work done.

      2 marks
      Show the answer

      Answer: W = FS cos θ = 200 × 6.0 × cos 60° = 200 × 6.0 × 0.5 = 600 J.

      Marking points

      • W = FS cos θ = 200 × 6.0 × cos 60°
      • 600 J
    3. (c)Explain why less work is done in the second case, even though the pull is the same.

      2 marks
      Show the answer

      Answer: Only the component of the pull along the floor, F cos θ = 100 N, does work. The component at right angles to the floor, F sin θ, is perpendicular to the motion and does no work.

      Marking points

      • Only the component F cos θ along the motion does work
      • The perpendicular component F sin θ does no work
  3. 3.State whether the force named does any work in each case. Give a reason for each answer.

    1. (a)A student holds a 5 kg bag of books still at the same height for two minutes. (The upward force of the hands.)

      2 marks
      Show the answer

      Answer: No work is done, because the bag does not move: S = 0, so W = 0 J.

      Marking points

      • No work
      • No displacement / S = 0
    2. (b)A porter carries a box on their head along a level platform at a steady speed. (The upward supporting force.)

      2 marks
      Show the answer

      Answer: No work is done. The force is upward but the box moves horizontally, at 90° to the force, so W = FS cos 90° = 0 J.

      Marking points

      • No work
      • Force perpendicular to the motion / θ = 90°, cos 90° = 0
    3. (c)A weightlifter raises a barbell from the floor to above the head. (The upward force of the arms.)

      2 marks
      Show the answer

      Answer: Yes, work is done. The force is upward and the barbell moves upward, in the direction of the force.

      Marking points

      • Work is done
      • Barbell moves in the direction of the force
  4. 4.A box is pushed along a floor. The push acts along the direction of motion. It is 25 N for the first 8.0 m and then 15 N for the next 4.0 m.

    1. (a)What does the area under a force–distance graph represent?

      1 mark
      Show the answer

      Answer: The work done by the force.

      Marking points

      • Work done
    2. (b)Use the idea of area under the graph to find the total work done on the box.

      3 marks
      Show the answer

      Answer: First strip: 25 N × 8.0 m = 200 J. Second strip: 15 N × 4.0 m = 60 J. Total work = 200 + 60 = 260 J.

      Marking points

      • 25 × 8.0 = 200 J
      • 15 × 4.0 = 60 J
      • Total 260 J

Quick check

6 questions

  1. 1.A force of 1 N moves a body 1 m in the direction of the force. The work done is:
  2. 2.A force F pulls a body through a distance S. The force makes an angle θ with the direction of motion. The work done is:
  3. 3.A porter carries a suitcase on their head along a level platform. The angle between the upward supporting force and the displacement is:
  4. 4.A 30 kg box is lifted 2.0 m at a steady speed. Taking g = 10 m s⁻², the work done on it is:
  5. 5.A force does 2.4 kJ of work while moving a body 12 m in its own direction. The size of the force is:
  6. 6.On a force–distance graph, the area under the line is measured in: