What topic 3.4 asks for
Making sound (Core)
Every sound starts with a vibration: a tabla skin, your vocal folds or a loudspeaker cone. Moving forwards, the surface crowds nearby air particles together; moving back, it lets them spread out. The particles vibrate backwards and forwards along the line the sound travels, so sound is a longitudinal wave. Each stays near its own fixed position: energy crosses the room, but the air does not.
Compressions and rarefactions (Supplement)
In a compression, particles crowd closer than normal and the pressure rises slightly. In a rarefaction, they spread further apart and the pressure dips. One compression to the next is one wavelength.
A medium is essential (Core)
Sound is passed on by particles, so it crosses solids, liquids and gases but never a vacuum. Pump the air out of a glass jar holding a ringing electric bell: the sound fades almost to nothing, yet the hammer is still seen striking.
Core: in air, the speed of sound is about 330–350 m/s, higher when the air is warm.
Supplement: in general, sound is quickest in solids, slower in liquids and slowest in gases: roughly 1500 m/s in water and nearly 6000 m/s in steel.
Measuring the speed in air (Core)
Two students stand a long, measured distance apart. One claps two flat pieces of wood together; the partner starts a stopwatch on seeing the clap and stops it on hearing it. Light arrives almost at once. Take several readings and use the mean time. Over a long distance, reaction-time errors form a smaller fraction of the time.
Worked example 1 (Core). The students are 240 m apart and time 0.70 s, 0.72 s and 0.71 s. Find the speed of sound.
Given: m; mean s. Equation: . Substitution: . Answer: m/s, about 340 m/s.
Loudness, pitch and hearing (Core)
A larger amplitude gives a louder sound; a higher frequency gives a higher pitch. Neither changes the speed in a given material. Most people hear from about 20 Hz to 20 000 Hz, and the upper limit falls with age.
Echoes and ultrasound
Core. An echo is sound reflected off a surface such as a cliff. Ultrasound is sound whose frequency is above 20 kHz, too high for humans to hear.
Supplement. Ultrasound pulses partly reflect at each boundary between materials. Echo time × speed is the distance there and back, so halve it.
- Non-destructive testing: finding hidden cracks in welds or rails without damaging them.
- Medical scanning: imaging soft tissue, such as an unborn baby or the liver.
- Sonar: ships measure sea depth or find shoals of fish.
Worked example 2 (Supplement). A fishing boat's sonar pulse comes back from a shoal of fish after 0.36 s. In sea water, sound travels at 1500 m/s. How deep is the shoal?
Equation: , then halve. Substitution: m, there and back. Answer: m.
Simulation tasks
In the simulation above, the starting note is 500 Hz at Amplitude 4, sent through Air at 340 m/s. Nothing moves before you press Play; the stage runs in labelled slow motion.
- (Core) Press Play. The particle labelled vibrates in place slides to and fro on the line the sound follows.
- (Supplement) C marks compressions (high pressure) and R rarefactions (low pressure); λ, 0.680 m, spans neighbouring compressions.
- (Core) Turn the volume down and press Sound beside Play. From Set-ups…, pick Louder: the note grows louder and the trace peaks rise from 2.0 to 3.0 divisions. Pick Start: 500 Hz, then Higher pitch (1 kHz): the note rises and the waves crowd closer, while the peaks stay 2.0 divisions high.
- (Core) Under What the sound travels through, choose Vacuum: the cone moves, but the trace is flat and nothing plays.
- (Supplement) Choose Water, then Steel: Speed of sound reads 1500 m/s, then 5900 m/s, while Frequency stays the same.
- (Core) Pick Ultrasound (25 kHz) from Set-ups…: the Frequency card names its band.
It shows no echoes, and its oscilloscope trace is beyond the syllabus.