What this topic covers
Step into the morning sun in Kathmandu and your face warms at once, although the air is still cold. The Sun's energy has crossed about 150 million kilometres of almost empty space. Much of that energy arrives as infrared, which is thermal radiation (syllabus 2.3.3).
Infrared needs no medium (Core)
Thermal radiation means infrared, a part of the electromagnetic spectrum. Every object emits it, even an ice cube. Conduction and convection need particles, but infrared does not, so it can cross a vacuum. At a surface, infrared may be absorbed, warming it, reflected, or passed straight through.
Colour and texture (Core)
| Surface | Emitting | Absorbing | Reflecting |
|---|---|---|---|
| Dull black | best | best | worst |
| Shiny silver | worst | worst | best |
Black surfaces emit and absorb infrared better than white ones, and dull ones better than shiny ones. White and shiny surfaces are the better reflectors.
White paint reflects most sunlight, so a white roof in Muscat stays far cooler than a black one. For the infrared from warm objects, though, white paint emits almost as well as black; the really poor emitter is shiny, polished metal.
Energy in, energy out (Supplement)
A temperature stays constant only when energy leaves an object as fast as it arrives. If energy arrives faster than it leaves, the object warms; if it leaves faster, the object cools. A warming object emits more, so it often settles at a higher steady temperature.
The Earth. Ground and sea absorb sunlight, and the surface emits infrared towards space. Greenhouse gases such as carbon dioxide, methane and water vapour absorb some of that infrared and send part of it back down, so the surface warms until it emits enough to balance again. Snow, ice and bright clouds reflect sunlight away; melting ice exposes darker sea, which absorbs more.
Rate of emission. A hotter surface emits infrared much faster, and a larger surface area at the same temperature emits more each second.
Comparing surfaces (Supplement)
Emitters. Fill a Leslie cube, a metal box whose four sides are painted or polished differently, with hot water, which puts all four faces at one temperature. Measure each face with an infrared detector held at a fixed distance, working quickly as the water cools.
Absorbers. Stand a dull black plate and a shiny metal plate the same distance from a radiant heater, and use wax to fix a pin behind each one. The pin behind the black plate falls first.
Worked example: Leslie cube readings (Supplement)
Water at 80 °C, detector 10 cm away: dull black 105, dull white 100, shiny black 97 and shiny silver 5.5 W/m².
(a) Name the best and worst emitters. Dull black and shiny silver.
(b) How many times larger is the dull black reading than the shiny silver one? 105 ÷ 5.5 ≈ 19.
(c) Why must the distance stay fixed? Readings fall with distance, and only the surface should change.
Measuring with the detector
In the simulation above, press Radiation. Test is on Emitting: a cube of water at 80 °C, its Dull black face 10 cm from the detector. Using the cube is Supplement; its readings illustrate the Core rules.
- (Supplement) Before pressing Play, press Record and then Turn, repeating until each face has its own row in the Results table. They should match the worked example closely.
- (Supplement) Select Dull black in the Face pointing at the detector buttons, then move the Water temperature at the start slider up to 95 °C. The Detector card now shows about 142 W/m², and only about 45 when the slider is at 50 °C.
- (Supplement) Switch Test to Absorbing, then start the run with Play. The Black plate pin drops after about 90 s and that plate levels off near 79 °C, while the Shiny plate stays below 25 °C. Each stops warming once energy leaves as fast as it is absorbed.