Higher tier and physics only
Spec point 4.5.7.3 is Higher tier only and GCSE Physics only, so neither Foundation nor Combined Science papers test it. You need to:
- link a resultant force to the rate of change of momentum
- calculate with
- explain how seat belts, air bags, gym crash mats, cycle helmets and soft playground surfaces reduce forces
- combine with the acceleration equation to work out how changing one quantity changes the others.
The equation is given on the Physics equation sheet (Higher tier), so you use it rather than memorise it.
Force and the rate of change of momentum
If the resultant force on an object is not zero, its velocity changes, and so does its momentum. Two familiar equations show how. Newton's second law says , and acceleration is . Substitute the second into the first:
is the resultant force in N, is the mass in kg, is the change in velocity in m/s, and is the time taken in s. Since is the change in momentum, force equals change in momentum divided by time: the rate of change of momentum.
Worked example 1: a penalty kick. A 0.45 kg football starts at rest. The boot touches it for 0.012 s, and it leaves at 24 m/s. Find the average force on the ball.
Given: kg, m/s, s. Equation: . Substitution: . Answer: N, in the direction the ball moves.
Direction matters: a ball hitting a wall at 8 m/s and coming back at 6 m/s has a change in velocity of 14 m/s, not 2 m/s.
Why safety features work
In a crash or fall, a person's momentum drops to zero. The size of that change depends only on their mass and speed, so no safety feature can alter it. A feature makes the change take longer. Then the rate of change of momentum is smaller, the force on the person is smaller, and injuries are less likely or less severe.
| Feature | What lengthens the stopping time |
|---|---|
| Seat belt | It stretches slightly, so the wearer slows down with the car instead of hitting the dashboard. |
| Air bag | It inflates, then lets gas out as the head and chest press into it. |
| Crumple zone | The front or back of the car folds up, so the car takes longer to stop. |
| Cycle helmet | Its foam liner crushes, so the head stops more gradually. |
| Crash mat or playground surface | Foam, rubber or bark chippings squash under the person landing. |
This fits too: a longer stopping time gives a smaller deceleration, , and the same mass then needs a smaller resultant force.
Worked example 2: a playground fall. A 30 kg child lands at 5.0 m/s and stops in 0.010 s on concrete, or in 0.060 s on a rubber surface. Compare the average resultant forces.
Given: kg, m/s, so kg m/s. Equation: . Substitution: concrete, ; rubber, . Answer: 15 000 N on concrete and 2500 N on rubber. Six times the time gives one sixth of the force.
Using the simulation
In the simulation above, the set-up starts as Modern car: everything on: a 1000 kg car at 15 m/s carrying a 75 kg crash-test dummy, with the Crumple zone, Seat belt and Airbag toggles all on. Press Play to run the crash. The table gives the car's change in momentum as 15000 kg m/s, its stopping time as 66.7 ms and the average force on it as 225 kN. Check: N.
Now choose No safety features from the Set-up menu and press Play again. The change in momentum stays at 15000 kg m/s, but the stopping time falls to 13.3 ms and the car's average force rises to 1130 kN (exactly 1125 kN), five times as much. The dummy's force grows from 10.5 kN to 84.4 kN. Press Slow-mo, then Replay, both beside Play, to watch the unbelted dummy hit the steering wheel.
All these times and forces are model values, not crash-test measurements: the model car crushes 0.50 m with a crumple zone and 0.10 m with a stiff front.