Skip to content

GCSE Physics — AQA · Atomic structure

Radioactive decay and nuclear radiation

4.4.2.1

Unstable nuclei decay at random, giving out alpha particles (helium nuclei), beta particles (fast electrons made in the nucleus), gamma rays or neutrons. Activity is in becquerels. Alpha ionises most and paper stops it; gamma ionises least and penetrates furthest. Both tiers, both courses.

Loading simulation…

Symbols match your course. Open the full alpha, beta and gamma radiation simulation for more presets and teacher tools.

What AQA asks for: spec point 4.4.2.1

Both tiers and both courses, GCSE Physics and Combined Science, cover this point, which has no equation. Aim to be able to:

  • explain radioactive decay, and what "random" means here
  • say what activity (in becquerels) and count rate measure
  • describe the four emissions from a nucleus: alpha, beta, gamma and the neutron
  • compare alpha, beta and gamma on three properties only: how far each travels in air, which materials it can get through, and how strongly it ionises
  • choose the best radiation for a job, with reasons

Nuclear equations are 4.4.2.2; half-life is 4.4.2.3. Background radiation and medical uses are GCSE Physics only (4.4.3). Bending in fields is not in the AQA spec.

Unstable nuclei

A nucleus that is unstable can become more stable by throwing out radiation. That event is radioactive decay. It is random: nobody can predict which nucleus in a sample will decay next, or when.

  • Activity tells you how many nuclei in a source decay each second. Its unit is the becquerel (Bq): 1 Bq is one decay every second.
  • Count rate is what a detector registers: the number of counts per second from, say, a Geiger–Müller (GM) tube.

The count rate is far below the activity, because radiation leaves the source in all directions and most of it misses the tube.

What leaves the nucleus

  • Alpha particle (α): a helium nucleus, meaning a bound group of two protons and two neutrons.
  • Beta particle (β): a fast electron. A neutron in the nucleus becomes a proton, and the electron created in that change shoots out. It is not one of the atom's own electrons.
  • Gamma ray (γ): a high-energy electromagnetic wave sent out by the nucleus, with no mass or charge.
  • Neutron (n): some nuclei decay by emitting a neutron.
AlphaBetaGamma
Ionising powerstrongmoderateweak
Range in airabout 5 cmup to a few metres, depending on its energyvery far, with no definite range
Absorbed bypaper, or the dead outer cells of skinaluminium a few millimetres thickonly partly, even by thick lead or concrete

The rows are linked. Each ionisation, knocking an electron out of an atom, costs energy. Alpha ionises so many atoms that its energy is gone within centimetres; gamma rarely ionises, so it penetrates furthest.

Matching the radiation to the job

  • Smoke alarm: alpha. It ionises the air in a small chamber; smoke absorbs it, triggering the alarm. Its short range keeps it inside the case.
  • Controlling paper thickness: beta. Thicker paper absorbs more beta, so the detector tracks the thickness. Alpha would never get through; gamma would pass almost unchanged.
  • Sterilising sealed medical kit: gamma. It passes through the packaging and kills bacteria inside.

Worked example: which radiation?

A sealed source is tested at a fixed distance from a GM tube, with background already taken off.

AbsorberCorrected count rate (counts per minute)
none1180
paper640
3 mm aluminium630
2 cm lead200
  1. Paper lowers the rate by 1180−640=5401180 - 640 = 540 counts per minute. Of the three, only alpha is stopped by paper, so the source emits alpha.
  2. Aluminium changes it by only 10, which random variation explains. So there is no beta.
  3. Radiation still passes the aluminium, and lead reduces it without stopping it: gamma.

As counts per second, the first reading is 1180÷60≈201180 \div 60 \approx 20.

In the simulation above

Penetration opens with the Alpha source 3 cm from the tube, no absorber and a background of 20 counts/min.

  1. Press Play for a 1 min count, or Skip to finish it at once: Count rate near 1020 counts/min, Corrected count rate near 1000 counts/min.
  2. Choose Paper under Absorber and count again. Only the background remains.
  3. Choose Beta under Source and None under Absorber: about 790 counts/min. Paper lowers it to about 730; Aluminium, at its starting 3 mm, leaves only background.
  4. Choose Gamma. Through the aluminium it reads about 1170 counts/min; 2 cm of Lead cuts that to about 400.
  5. Open Range, choose Alpha and move Tube distance from the source to 5 cm. Only background is left.

The ion-pair numbers in Ionising, and all of Fields, go beyond AQA.

Common mistakes

  • Saying a beta particle is one of the electrons from around the nucleus. It forms in the nucleus as a neutron turns into a proton, and leaves at high speed.
  • Describing gamma as a particle with mass or charge. Gamma rays are electromagnetic radiation given out by the nucleus; they have neither mass nor charge.
  • Assuming the most ionising radiation is also the most penetrating. It is the reverse: alpha ionises most strongly, uses up its energy fastest and is stopped by paper or a few centimetres of air.
  • Writing that lead stops gamma completely. Thick lead or concrete absorbs most of it, but some always gets through.
  • Mixing up activity and count rate. Activity is how many nuclei in the source decay each second, in becquerels; count rate is what a detector records each second, which is usually far smaller.
  • Thinking you can tell when a particular nucleus will decay. Decay is random, so only the behaviour of a large number of nuclei can be described.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.Americium-241 is used in smoke alarms. Its nuclei are unstable and emit alpha particles.

    1. (a)Describe what an alpha particle is made of.

      2 marks
      Show the answer

      Answer: It consists of two protons and two neutrons: the same particles as a helium nucleus.

      Marking points

      • Two protons
      • Two neutrons (allow: a helium nucleus, for both marks)
    2. (b)The decay of americium-241 nuclei is random. Explain what this means.

      2 marks
      Show the answer

      Answer: It is impossible to predict which nucleus will decay next, or when any particular nucleus will decay.

      Marking points

      • Cannot predict which nucleus will decay (next)
      • Cannot predict when a given nucleus will decay
    3. (c)The americium-241 in one smoke alarm has an activity of 37 000 Bq. State what this tells you.

      2 marks
      Show the answer

      Answer: 37 000 nuclei in the sample decay every second.

      Marking points

      • 37 000 nuclei decay / 37 000 decays
      • Each second
    4. (d)Explain why an alpha source is suitable for a smoke alarm used in a home.

      3 marks
      Show the answer

      Answer: Alpha is strongly ionising, so it ionises the air inside the alarm's chamber. It has a range in air of only a few centimetres and is stopped by thin materials, so it is absorbed inside the alarm and does not reach people in the room.

      Marking points

      • Alpha is strongly ionising, so it ionises the air in the alarm
      • Short range in air (a few cm) / absorbed by a thin layer such as the case
      • So the radiation does not escape to reach people in the room
  2. 2.A student places different absorbers between a radioactive source and a Geiger–Müller tube. The background count rate has been subtracted from each reading. No absorber: 480 counts per minute. One sheet of paper: 471 counts per minute. 5 mm of aluminium: 2 counts per minute.

    1. (a)Which type of radiation does the source emit? Explain how the data show this.

      3 marks
      Show the answer

      Answer: Beta. Paper makes almost no difference, so the source does not emit alpha. The aluminium brings the count rate down to almost zero, so there is no gamma; beta is the radiation that passes paper but is absorbed by a few millimetres of aluminium.

      Marking points

      • Beta (only)
      • Paper hardly changes the count rate, so no alpha
      • Aluminium reduces it to (almost) zero, so no gamma / radiation stopped by aluminium is beta
    2. (b)The student repeats the reading with no absorber and gets 466 counts per minute. Suggest why the two readings are different.

      1 mark
      Show the answer

      Answer: Radioactive decay is random, so the number of counts varies from one measurement to the next.

      Marking points

      • Radioactive decay is random
    3. (c)Calculate the count rate with no absorber in counts per second.

      2 marks
      Show the answer

      Answer: 480 ÷ 60 = 8 counts per second

      Marking points

      • 480 ÷ 60
      • 8 counts per second
    4. (d)Describe how a beta particle is produced.

      2 marks
      Show the answer

      Answer: A neutron in the nucleus turns into a proton. A high-speed electron is ejected from the nucleus: this is the beta particle.

      Marking points

      • A neutron (in the nucleus) changes into a proton
      • A high-speed electron is emitted from the nucleus
  3. 3.A paper mill uses a radioactive source and a detector to check the thickness of the paper it makes. The source is above the moving sheet of paper and the detector is below it.

    1. (a)Explain why a beta source is used, rather than an alpha source or a gamma source.

      4 marks
      Show the answer

      Answer: Alpha would be stopped by the paper, so nothing would reach the detector. Gamma would pass through almost all of it whatever the thickness, so the reading would barely change. Beta is partly absorbed by paper, and the amount absorbed depends on the thickness, so the count rate changes noticeably when the thickness changes.

      Marking points

      • Alpha would be absorbed / stopped completely by the paper
      • Gamma would pass through with (almost) no change in count rate
      • Beta is partly absorbed by paper
      • The amount of beta absorbed depends on the thickness, so changes in the count rate show changes in thickness
    2. (b)The paper coming out of the rollers becomes thicker. State what happens to the count rate at the detector.

      1 mark
      Show the answer

      Answer: It decreases, because more beta particles are absorbed.

      Marking points

      • Decreases
    3. (c)Gamma rays are emitted from some nuclei. Name the type of wave that gamma rays are.

      1 mark
      Show the answer

      Answer: Electromagnetic waves.

      Marking points

      • Electromagnetic

Quick check

6 questions

  1. 1.What is an alpha particle?
  2. 2.Which radiation is stopped by a single sheet of paper?
  3. 3.What is the unit of activity?
  4. 4.How is a beta particle formed?
  5. 5.Which type of radiation is the most strongly ionising?
  6. 6.A GM tube records 1200 counts in 2 minutes. What is the count rate in counts per second?