Skip to content

Cambridge IGCSE Physics (0625) · Thermal physics

Gas pressure and volume

2.1.22.1.3

Core: gas pressure comes from particles colliding with surfaces; explain in particle terms how heating at constant volume, or squeezing at constant temperature, changes the pressure of a fixed mass of gas. Supplement: force per unit area from the collisions, and pV = constant with its graph.

Loading simulation…

Symbols match your course. Open the full gas laws and particles simulation for more presets and teacher tools.

What this topic covers

A football pumped up at breakfast in Doha feels rock hard after a morning in the sun. A blocked syringe pushes back harder the further you press. Both come from gas particles striking surfaces (syllabus 2.1.2–2.1.3).

Where gas pressure comes from (Core)

Gas particles are far apart and move fast in random directions. A particle striking the container wall rebounds and gives the wall a tiny push. Vast numbers of these pushes every second add up to a steady pressure on every surface.

The pressure grows when particles reach the walls more often (more collisions per second), or when each collision is harder because the particles are faster.

Force per unit area (Supplement)

Each collision exerts a small force on the wall. Add the forces from every collision on a surface, divide by its area, and you have the pressure, as in p=F/Ap = F/A (topic 1.8). From topic 1.6: a rebounding particle's momentum changes, so a force acts on it, and it pushes back on the wall.

Heating at constant volume (Core)

Picture a sealed steel gas bottle in sunshine; its volume cannot change.

  1. The particles gain kinetic energy and move faster on average.
  2. They arrive at the walls more frequently, and each impact is harder.
  3. So the pressure rises. Cooling the bottle lowers it.

Changing the volume at constant temperature (Core)

Press the plunger of a sealed syringe slowly, so the air stays at room temperature.

  1. The particles keep the same average speed, so the impacts are no harder on average.
  2. In the smaller space they reach each square centimetre of wall more often.
  3. So the pressure rises. A larger volume gives a lower pressure.

The equation pV = constant (Supplement)

When the mass of gas is fixed and its temperature does not change, pressure times volume stays the same:

pV=constantsop1V1=p2V2pV = \text{constant} \qquad \text{so} \qquad p_1 V_1 = p_2 V_2

Subscript 1 means before the change; 2 means after. You need to remember this equation. Any units work, as long as both pressures use one unit and both volumes another. If the volume falls to half, the pressure becomes twice as big.

The graph of pp against VV is a curve, steep at small volumes and flatter at large ones, approaching both axes without ever reaching them. Plotting pp against 1/V1/V gives a straight line through the origin.

Worked example 1: the football (Core)

Explain, in particle terms, why the football's pressure is higher at midday, given that its volume has barely changed.

  1. The air particles gain kinetic energy and move faster.
  2. They hit the inside of the ball more often.
  3. Each hit is harder, so the pressure is greater.

Worked example 2: oxygen for a hospital (Supplement)

A hospital in Nairobi stores oxygen in a 0.040 m³ cylinder at 1.5×1071.5 \times 10^7 Pa. What volume would this oxygen fill at 1.0×1051.0 \times 10^5 Pa and the same temperature?

V2=p1V1p2=1.5×107×0.0401.0×105=6.0 m3V_2 = \frac{p_1 V_1}{p_2} = \frac{1.5 \times 10^7 \times 0.040}{1.0 \times 10^5} = 6.0\ \text{m}^3

Answer: 6.0 m³. The pressure falls 150-fold, so the volume grows 150-fold.

Simulation tasks

In the simulation above, Experiment starts on Constant temperature, with Volume 300 cm³, Set temperature 300 K (27 °C) and 60 particles. Readings wobble, so treat them as approximate.

  1. (Core) Press Play: flashes show particles bouncing off the walls. Once 4 s average appears on the Pressure card, it reads close to 102 kPa.
  2. (Core) Bring the Volume to 150 cm³ with the piston handle, the slider or Squeeze. The Temperature card rises a little while the piston moves, then returns to 300 K; the pressure settles near 208 kPa.
  3. (Supplement) Record settled readings at 300, 250, 200, 150 and 100 cm³. Pressure × volume stays near 31 000 kPa cm³, creeping up a few per cent at small volumes, as the particles take up room. Under Plot, the points on p against 1/V fall almost on a line through the origin; switch to p against V to see the curve.
  4. (Core) Choose Constant volume, press Heat and watch the gauge climb, then press Cool.

Work done (thermostat off) goes beyond the Cambridge syllabus.

Equations

  • Pressure and volume of a gas

    Learn this · Supplement

    p1=p2V2V1

    pressure × volume = constant (fixed mass of gas at constant temperature), so p₁V₁ = p₂V₂

    Open calculator →

Common mistakes

  • Saying that heating a gas makes its particles expand, so they push harder. The particles stay the same size; they move faster, so their collisions with the walls are more frequent and more forceful.
  • Explaining the higher pressure in a squeezed gas by saying the particles speed up. At constant temperature their average speed does not change; they hit the walls more often because there is less space to cross.
  • Writing only 'the particles collide more'. Say where and how often: the particles hit the walls (the surface) more frequently, that is, more collisions every second.
  • (Supplement) Using pV = constant when the temperature changes, or when gas escapes or is pumped in. The rule holds only while the mass of gas stays fixed and its temperature stays the same.
  • (Supplement) Putting kPa for one pressure and Pa for the other into p₁V₁ = p₂V₂. Any units will do, but the two pressures must match, and so must the two volumes.
  • (Supplement) Sketching the p–V graph as a straight line sloping down, or letting the curve meet an axis. It is a curve that gets closer and closer to both axes without touching them.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A sealed metal can contains air. The can is rigid, so the volume of the air inside cannot change.

    1. (a)Describe how the air particles produce a pressure on the walls of the can.

      2 marks
      Show the answer

      Answer: The particles move about randomly at high speed. They collide with the walls of the can and bounce off, and each collision pushes on the wall.

      Marking points

      • particles move (randomly / quickly) and collide with the walls
      • each collision pushes on (exerts a force on) the wall
    2. (b)The can is placed in a bowl of hot water. State what happens to the pressure of the air in the can.

      1 mark
      Show the answer

      Answer: The pressure increases.

      Marking points

      • increases
    3. (c)Explain, in terms of particles, your answer to the previous part.

      3 marks
      Show the answer

      Answer: The particles gain kinetic energy and move faster on average. They collide with the walls more often, and each collision is harder, so the pressure is greater.

      Marking points

      • particles move faster / gain kinetic energy
      • hit the walls more frequently / more collisions per second
      • collisions are harder / exert a greater force
    4. (d)Suggest why spray cans carry a warning not to heat them.

      1 mark
      Show the answer

      Answer: The pressure inside could become so large that the can bursts.

      Marking points

      • pressure could become high enough to burst (explode) the can
  2. 2.A student blocks the nozzle of a syringe containing air and pushes the plunger in slowly. The air stays at room temperature throughout.

    1. (a)State what happens to the pressure of the air in the syringe.

      1 mark
      Show the answer

      Answer: The pressure increases.

      Marking points

      • increases
    2. (b)State what happens to the average speed of the air particles.

      1 mark
      Show the answer

      Answer: It stays the same, because the temperature does not change.

      Marking points

      • stays the same (unchanged)
    3. (c)Explain, in terms of particles, why the pressure changes.

      2 marks
      Show the answer

      Answer: The same particles now have a smaller space to move in, so they hit the walls of the syringe more often. There are more collisions with each part of the wall every second, so the pressure is greater.

      Marking points

      • smaller volume / particles have less space to move in
      • particles hit the walls more often (more collisions per second)
    4. (d)The student lets go and the plunger moves back out. State what happens to the pressure of the air.

      1 mark
      Show the answer

      Answer: It decreases.

      Marking points

      • decreases
  3. 3.A sealed metal cylinder fitted with a movable piston holds 180 cm³ of air at 1.0 × 10⁵ Pa. The piston is moved in gradually, and the air stays at room temperature.

    1. (a)(Supplement) Give the two conditions under which pV = constant is true.

      2 marks
      Show the answer

      Answer: No gas may enter or leave (a fixed mass), and the temperature must not change.

      Marking points

      • fixed mass of gas (no gas escapes or enters)
      • constant temperature
    2. (b)(Supplement) The volume of the air is reduced to 45 cm³. Calculate its new pressure.

      3 marks
      Show the answer

      Answer: p₁V₁ = p₂V₂, so p₂ = (1.0 × 10⁵ × 180) ÷ 45 = 4.0 × 10⁵ Pa

      Marking points

      • p₁V₁ = p₂V₂ (or pV = constant) used
      • 1.0 × 10⁵ × 180 = p₂ × 45, or (1.0 × 10⁵ × 180) ÷ 45 seen
      • 4.0 × 10⁵ Pa
    3. (c)(Supplement) Calculate the volume of the air when its pressure is 2.5 × 10⁵ Pa.

      2 marks
      Show the answer

      Answer: V₂ = (1.0 × 10⁵ × 180) ÷ (2.5 × 10⁵) = 72 cm³

      Marking points

      • (1.0 × 10⁵ × 180) ÷ (2.5 × 10⁵) seen
      • 72 cm³
    4. (d)(Supplement) Explain, in terms of the forces exerted by the particles, why the pressure is greater when the volume is smaller.

      2 marks
      Show the answer

      Answer: There are more collisions with each unit area of the cylinder wall every second. So the total force on each unit area is greater, and pressure is force per unit area.

      Marking points

      • more collisions per second with each unit area of the wall
      • greater force per unit area (so greater pressure)
  4. 4.A student measures the pressure p of a fixed mass of gas at different volumes V, keeping the temperature constant. The results are: V = 40 cm³, p = 200 kPa; V = 50 cm³, p = 160 kPa; V = 80 cm³, p = 100 kPa; V = 100 cm³, p = 80 kPa; V = 160 cm³, p = 50 kPa.

    1. (a)(Supplement) Use the results to show that pV is constant.

      2 marks
      Show the answer

      Answer: 40 × 200 = 50 × 160 = 80 × 100 = 100 × 80 = 160 × 50 = 8000 kPa cm³, the same for every result.

      Marking points

      • p × V worked out for at least three results
      • all equal to 8000 (kPa cm³)
    2. (b)(Supplement) Describe the shape of a graph of p against V for these results.

      2 marks
      Show the answer

      Answer: A curve on which p decreases as V increases. It becomes less steep at larger volumes and does not meet either axis.

      Marking points

      • a curve with p decreasing as V increases
      • becomes less steep / does not touch either axis
    3. (c)(Supplement) Calculate the pressure of the gas when its volume is 64 cm³.

      2 marks
      Show the answer

      Answer: p = 8000 ÷ 64 = 125 kPa

      Marking points

      • 8000 ÷ 64 seen
      • 125 kPa
    4. (d)(Supplement) State the volume at which the pressure of the gas would be 400 kPa.

      1 mark
      Show the answer

      Answer: V = 8000 ÷ 400 = 20 cm³

      Marking points

      • 20 cm³

Quick check

6 questions

  1. 1.What causes the pressure that a gas exerts on the walls of its container?
  2. 2.A fixed mass of gas in a sealed rigid container is heated. Which statement is correct?
  3. 3.A fixed mass of gas is squeezed slowly into a smaller volume at constant temperature. Why does its pressure increase?
  4. 4.(Supplement) A gas fills 200 cm³ at 90 kPa. At constant temperature it is compressed to 120 cm³. What is its new pressure?
  5. 5.(Supplement) For a fixed mass of gas at constant temperature, which describes a graph of pressure p against volume V?
  6. 6.(Supplement) Which statement describes gas pressure in terms of particles?