Skip to content

Light and optics simulation

Reflection in a Plane Mirror Simulation

Aim a ray box at a plane mirror and read both angles from the normal on a protractor. Then find where a pin's image forms, see why an eye can miss it, and watch a beam stay parallel on a mirror but scatter on paper.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A ray hits a plane mirror along the normal, so the angle of incidence is 0°. Where does the light go after it reflects?

Try this

  1. 1Start at the default angle of incidence of 40°. Drag the ray box slowly towards the mirror and watch the Angle of reflection card: does it ever differ from the angle of incidence?
  2. 2Switch on Trap: angle to the mirror. At 40° the cross marks 50°, the angle between the ray and the mirror itself. Which of the two numbers belongs in an exam answer?
  3. 3Choose Turn the mirror from the Set-ups menu. The mirror turns 10° while the ray box stays put. Read the Mirror turned card to see how far the reflected ray swings.
  4. 4Press Image, then drag the eye around in front of the mirror. The bright rays change, but does the image ever leave its spot 12 cm behind the mirror?
  5. 5Press Surfaces and choose Rough paper. The reflected rays fly off in different directions, yet check the list under the stage: is each angle of incidence still matched?

Three ways in

Three views share the stage. In Ray, you swing a ray box around a protractor laid along a plane mirror. In Image, a flagged pin stands on a bench before an upright mirror while an eye looks in. In Surfaces, a wide beam lands on a smooth mirror or on paper. The Set-ups menu holds ready-made arrangements, a periscope among them.

Two rules for every reflection

Where the ray lands, a dashed normal rises at right angles to the mirror. The angle of incidence ii is how far the arriving ray tilts from that normal, and the angle of reflection rr is how far the departing ray tilts from it. Set the box anywhere and the two readouts agree:

i=ri = r

The other rule hides because a screen is flat. The arriving ray, the normal and the departing ray all share one plane, which here is the screen itself. Send the beam down the normal and both angles are zero: the light returns along its own path.

Why the normal and not the glass?

Measuring from the mirror is a common way to lose this mark. Switch on the trap overlay to see how far the ray tilts from the mirror itself, which is always 90∘−i90^\circ - i. With 40° of incidence it reads 50°; the two only agree at 45°.

Turning the mirror

Keep the ray box still and tilt the mirror. The normal tilts by the same amount, so ii changes by that much and rr follows. Both changes push the reflected ray the same way, and it swings through twice the mirror's turn. A faint dotted line marks its old direction. Treat this as an extension: few courses include it. In the periscope, two parallel mirrors at 45° each turn the light through 90°, and it leaves travelling the way it entered, only lower down.

Finding the image

Light leaves the pin's head in every direction; rays that bounce into the eye are drawn bright, the rest faint. Trace any reflected ray backwards behind the glass and it passes through one point, the image. Dashed lines show those extensions, and no light travels along them.

The bench ruler shows the image as far behind the mirror as the pin stands in front, on a line crossing the mirror at 90°. It matches the pin's height and stays the right way up. The light only seems to come from there, so the image is virtual: a screen at that spot shows no image.

Move the eye and the bright rays change, but the image stays put. Lift it high above a short mirror and the light it needs would have to bounce off glass that is not there: the eye loses sight of the image, which has not moved.

Left and right

Compare the flags: both point away from the mirror, so on the screen they face opposite ways. A mirror swaps front for back, along the line at right angles to its surface. Hold writing up to a mirror and that reversal makes it read backwards, left and right swapped: lateral inversion.

Smooth and rough

Every part of a mirror faces the same way, so a parallel beam leaves still parallel: specular, or regular, reflection, which forms an image. Paper is bumpy on a tiny scale. Each ray still obeys i=ri = r against the patch it strikes, as the dashed local normals show, but the patches tilt every which way and the beam scatters: diffuse reflection, with no clear image.

Check your understanding

8 questions

  1. 1.A ray strikes a plane mirror with an angle of incidence of 35°. What is the angle of reflection?
  2. 2.A ray meets a mirror at 20° to the mirror's surface. What is its angle of incidence?
  3. 3.Where is the normal drawn in a reflection ray diagram?
  4. 4.A pin stands 15 cm in front of a plane mirror. How far is the pin from its image?
  5. 5.A screen is placed exactly where a plane mirror's image appears to be. What does the screen show?
  6. 6.A mirror turns through 15° while the ray striking it stays fixed. Through what angle does the reflected ray turn?
  7. 7.White paper reflects most of the light that falls on it. Why can you not see your face in it?
  8. 8.You hold a card printed with the letter R so that it faces a plane mirror. How does the image of the R look?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more